qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-block] [PULL 2/4] blockjob: do not cancel timer in resume


From: Jeff Cody
Subject: [Qemu-block] [PULL 2/4] blockjob: do not cancel timer in resume
Date: Wed, 16 May 2018 13:42:32 -0400

From: Stefan Hajnoczi <address@hidden>

Currently the timer is cancelled and the block job is entered by
block_job_resume().  This behavior causes drain to run extra blockjob
iterations when the job was sleeping due to the ratelimit.

This patch leaves the job asleep when block_job_resume() is called.
Jobs can still be forcibly woken up using block_job_enter(), which is
used to cancel jobs.

After this patch drain no longer runs extra blockjob iterations.  This
is the expected behavior that qemu-iotests 185 used to rely on.  We
temporarily changed the 185 test output to make it pass for the QEMU
2.12 release but now it's time to address this issue.

Cc: QingFeng Hao <address@hidden>
Signed-off-by: Stefan Hajnoczi <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Reviewed-by: QingFeng Hao <address@hidden>
Message-id: address@hidden
Reviewed-by: Jeff Cody <address@hidden>
Signed-off-by: Jeff Cody <address@hidden>
---
 blockjob.c                 | 22 +++++++++++++++-------
 tests/qemu-iotests/185     |  5 +----
 tests/qemu-iotests/185.out | 12 +++++-------
 3 files changed, 21 insertions(+), 18 deletions(-)

diff --git a/blockjob.c b/blockjob.c
index 36c5fdeb2f..112672a68b 100644
--- a/blockjob.c
+++ b/blockjob.c
@@ -209,6 +209,18 @@ static void block_job_txn_del_job(BlockJob *job)
     }
 }
 
+/* Assumes the block_job_mutex is held */
+static bool block_job_timer_pending(BlockJob *job)
+{
+    return timer_pending(&job->sleep_timer);
+}
+
+/* Assumes the block_job_mutex is held */
+static bool block_job_timer_not_pending(BlockJob *job)
+{
+    return !block_job_timer_pending(job);
+}
+
 static void block_job_pause(BlockJob *job)
 {
     job->pause_count++;
@@ -221,7 +233,9 @@ static void block_job_resume(BlockJob *job)
     if (job->pause_count) {
         return;
     }
-    block_job_enter(job);
+
+    /* kick only if no timer is pending */
+    block_job_enter_cond(job, block_job_timer_not_pending);
 }
 
 void block_job_ref(BlockJob *job)
@@ -656,12 +670,6 @@ static void block_job_completed_txn_success(BlockJob *job)
     }
 }
 
-/* Assumes the block_job_mutex is held */
-static bool block_job_timer_pending(BlockJob *job)
-{
-    return timer_pending(&job->sleep_timer);
-}
-
 void block_job_set_speed(BlockJob *job, int64_t speed, Error **errp)
 {
     int64_t old_speed = job->speed;
diff --git a/tests/qemu-iotests/185 b/tests/qemu-iotests/185
index 975404c99d..9a2d317414 100755
--- a/tests/qemu-iotests/185
+++ b/tests/qemu-iotests/185
@@ -101,14 +101,11 @@ echo
 # command to be received (after receiving the command, the rest runs
 # synchronously, so jobs can arbitrarily continue or complete).
 #
-# Jobs present while QEMU is terminating iterate once more due to
-# bdrv_drain_all().
-#
 # The buffer size for commit and streaming is 512k (waiting for 8 seconds after
 # the first request), for active commit and mirror it's large enough to cover
 # the full 4M, and for backup it's the qcow2 cluster size, which we know is
 # 64k. As all of these are at least as large as the speed, we are sure that the
-# offset advances exactly twice before qemu exits.
+# offset advances exactly once before qemu exits.
 
 _send_qemu_cmd $h \
     "{ 'execute': 'block-commit',
diff --git a/tests/qemu-iotests/185.out b/tests/qemu-iotests/185.out
index 992162f418..57eaf8d699 100644
--- a/tests/qemu-iotests/185.out
+++ b/tests/qemu-iotests/185.out
@@ -20,7 +20,7 @@ Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 
backing_file=TEST_DIR/t.q
 {"return": {}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
1048576, "speed": 65536, "type": "commit"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
524288, "speed": 65536, "type": "commit"}}
 
 === Start active commit job and exit qemu ===
 
@@ -28,8 +28,7 @@ Formatting 'TEST_DIR/t.qcow2', fmt=qcow2 size=67108864 
backing_file=TEST_DIR/t.q
 {"return": {}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_READY", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "commit"}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_COMPLETED", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "commit"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "commit"}}
 
 === Start mirror job and exit qemu ===
 
@@ -38,8 +37,7 @@ Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 
cluster_size=65536 l
 {"return": {}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_READY", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "mirror"}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_COMPLETED", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "mirror"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 4194304, "offset": 
4194304, "speed": 65536, "type": "mirror"}}
 
 === Start backup job and exit qemu ===
 
@@ -48,7 +46,7 @@ Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 
cluster_size=65536 l
 {"return": {}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
131072, "speed": 65536, "type": "backup"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
65536, "speed": 65536, "type": "backup"}}
 
 === Start streaming job and exit qemu ===
 
@@ -56,6 +54,6 @@ Formatting 'TEST_DIR/t.qcow2.copy', fmt=qcow2 size=67108864 
cluster_size=65536 l
 {"return": {}}
 {"return": {}}
 {"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"SHUTDOWN", "data": {"guest": false}}
-{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
1048576, "speed": 65536, "type": "stream"}}
+{"timestamp": {"seconds":  TIMESTAMP, "microseconds":  TIMESTAMP}, "event": 
"BLOCK_JOB_CANCELLED", "data": {"device": "disk", "len": 67108864, "offset": 
524288, "speed": 65536, "type": "stream"}}
 No errors were found on the image.
 *** done
-- 
2.13.6




reply via email to

[Prev in Thread] Current Thread [Next in Thread]