[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL 07/20] iotests: Filter 175's allocation information
From: |
Max Reitz |
Subject: |
[Qemu-block] [PULL 07/20] iotests: Filter 175's allocation information |
Date: |
Fri, 14 Jun 2019 15:40:08 +0200 |
It is possible for an empty file to take up blocks on a filesystem, for
example:
$ qemu-img create -f raw test.img 1G
Formatting 'test.img', fmt=raw size=1073741824
$ mkfs.ext4 -I 128 -q test.img
$ mkdir test-mount
$ sudo mount -o loop test.img test-mount
$ sudo touch test-mount/test-file
$ stat -c 'blocks=%b' test-mount/test-file
blocks=8
These extra blocks (one cluster) are apparently used for metadata,
because they are always there, on top of blocks used for data:
$ sudo dd if=/dev/zero of=test-mount/test-file bs=1M count=1
1+0 records in
1+0 records out
1048576 bytes (1.0 MB, 1.0 MiB) copied, 0.00135339 s, 775 MB/s
$ stat -c 'blocks=%b' test-mount/test-file
blocks=2056
Make iotest 175 take this into account.
Reported-by: Thomas Huth <address@hidden>
Signed-off-by: Max Reitz <address@hidden>
Reviewed-by: Eric Blake <address@hidden>
Reviewed-by: Nir Soffer <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
tests/qemu-iotests/175 | 26 ++++++++++++++++++++++----
tests/qemu-iotests/175.out | 8 ++++----
2 files changed, 26 insertions(+), 8 deletions(-)
diff --git a/tests/qemu-iotests/175 b/tests/qemu-iotests/175
index d0ffc495c2..51e62c8276 100755
--- a/tests/qemu-iotests/175
+++ b/tests/qemu-iotests/175
@@ -28,10 +28,25 @@ status=1 # failure is the default!
_cleanup()
{
- _cleanup_test_img
+ _cleanup_test_img
+ rm -f "$TEST_DIR/empty"
}
trap "_cleanup; exit \$status" 0 1 2 3 15
+# Some file systems sometimes allocate extra blocks independently of
+# the file size. This function hides the resulting difference in the
+# stat -c '%b' output.
+# Parameter 1: Number of blocks an empty file occupies
+# Parameter 2: Image size in bytes
+_filter_blocks()
+{
+ extra_blocks=$1
+ img_size=$2
+
+ sed -e "s/blocks=$extra_blocks\\(\$\\|[^0-9]\\)/nothing allocated/" \
+ -e "s/blocks=$((extra_blocks + img_size /
512))\\(\$\\|[^0-9]\\)/everything allocated/"
+}
+
# get standard environment, filters and checks
. ./common.rc
. ./common.filter
@@ -40,18 +55,21 @@ _supported_fmt raw
_supported_proto file
_supported_os Linux
-size=1m
+size=$((1 * 1024 * 1024))
+
+touch "$TEST_DIR/empty"
+extra_blocks=$(stat -c '%b' "$TEST_DIR/empty")
echo
echo "== creating image with default preallocation =="
_make_test_img $size | _filter_imgfmt
-stat -c "size=%s, blocks=%b" $TEST_IMG
+stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks $size
for mode in off full falloc; do
echo
echo "== creating image with preallocation $mode =="
IMGOPTS=preallocation=$mode _make_test_img $size | _filter_imgfmt
- stat -c "size=%s, blocks=%b" $TEST_IMG
+ stat -c "size=%s, blocks=%b" $TEST_IMG | _filter_blocks $extra_blocks $size
done
# success, all done
diff --git a/tests/qemu-iotests/175.out b/tests/qemu-iotests/175.out
index 76c02c6a57..6d9a5ed84e 100644
--- a/tests/qemu-iotests/175.out
+++ b/tests/qemu-iotests/175.out
@@ -2,17 +2,17 @@ QA output created by 175
== creating image with default preallocation ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576
-size=1048576, blocks=0
+size=1048576, nothing allocated
== creating image with preallocation off ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 preallocation=off
-size=1048576, blocks=0
+size=1048576, nothing allocated
== creating image with preallocation full ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 preallocation=full
-size=1048576, blocks=2048
+size=1048576, everything allocated
== creating image with preallocation falloc ==
Formatting 'TEST_DIR/t.IMGFMT', fmt=IMGFMT size=1048576 preallocation=falloc
-size=1048576, blocks=2048
+size=1048576, everything allocated
*** done
--
2.21.0
- [Qemu-block] [PULL 00/20] Block patches, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 01/20] blockdev-backup: don't check aio_context too early, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 04/20] iotests.py: rewrite run_job to be pickier, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 02/20] iotests.py: do not use infinite waits, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 06/20] event_match: always match on None value, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 08/20] iotests: Fix intermittent failure in 219, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 07/20] iotests: Filter 175's allocation information,
Max Reitz <=
- [Qemu-block] [PULL 03/20] QEMUMachine: add events_wait method, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 05/20] iotests: add iotest 256 for testing blockdev-backup across iothread contexts, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 09/20] hw/block/fdc: floppy command FIFO memory initialization, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 10/20] iotests: restrict 254 to support only qcow2, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 12/20] qapi/block-core: Overlays are not snapshots, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 11/20] qemu-img: Fix options leakage in img_rebase(), Max Reitz, 2019/06/14
- [Qemu-block] [PULL 14/20] qemu-img: Move quiet into ImgConvertState, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 13/20] blockdev: Overlays are not snapshots, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 15/20] qemu-img: Add salvaging mode to convert, Max Reitz, 2019/06/14
- [Qemu-block] [PULL 16/20] blkdebug: Add @iotype error option, Max Reitz, 2019/06/14