[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL v2 7/8] ssh: switch from libssh2 to libssh
|
From: |
Max Reitz |
|
Subject: |
[Qemu-block] [PULL v2 7/8] ssh: switch from libssh2 to libssh |
|
Date: |
Mon, 24 Jun 2019 16:47:39 +0200 |
From: Pino Toscano <address@hidden>
Rewrite the implementation of the ssh block driver to use libssh instead
of libssh2. The libssh library has various advantages over libssh2:
- easier API for authentication (for example for using ssh-agent)
- easier API for known_hosts handling
- supports newer types of keys in known_hosts
Use APIs/features available in libssh 0.8 conditionally, to support
older versions (which are not recommended though).
Adjust the iotest 207 according to the different error message, and to
find the default key type for localhost (to properly compare the
fingerprint with).
Contributed-by: Max Reitz <address@hidden>
Adjust the various Docker/Travis scripts to use libssh when available
instead of libssh2. The mingw/mxe testing is dropped for now, as there
are no packages for it.
Signed-off-by: Pino Toscano <address@hidden>
Tested-by: Philippe Mathieu-Daudé <address@hidden>
Acked-by: Alex Bennée <address@hidden>
Message-id: address@hidden
Reviewed-by: Philippe Mathieu-Daudé <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
configure | 65 +-
block/Makefile.objs | 6 +-
block/ssh.c | 652 ++++++++++--------
.travis.yml | 4 +-
block/trace-events | 14 +-
docs/qemu-block-drivers.texi | 2 +-
.../dockerfiles/debian-win32-cross.docker | 1 -
.../dockerfiles/debian-win64-cross.docker | 1 -
tests/docker/dockerfiles/fedora.docker | 4 +-
tests/docker/dockerfiles/ubuntu.docker | 2 +-
tests/docker/dockerfiles/ubuntu1804.docker | 2 +-
tests/qemu-iotests/207 | 54 +-
tests/qemu-iotests/207.out | 2 +-
13 files changed, 449 insertions(+), 360 deletions(-)
diff --git a/configure b/configure
index b091b82cb3..5c7914570e 100755
--- a/configure
+++ b/configure
@@ -472,7 +472,7 @@ auth_pam=""
vte=""
virglrenderer=""
tpm=""
-libssh2=""
+libssh=""
live_block_migration="yes"
numa=""
tcmalloc="no"
@@ -1439,9 +1439,9 @@ for opt do
;;
--enable-tpm) tpm="yes"
;;
- --disable-libssh2) libssh2="no"
+ --disable-libssh) libssh="no"
;;
- --enable-libssh2) libssh2="yes"
+ --enable-libssh) libssh="yes"
;;
--disable-live-block-migration) live_block_migration="no"
;;
@@ -1810,7 +1810,7 @@ disabled with --disable-FEATURE, default is enabled if
available:
coroutine-pool coroutine freelist (better performance)
glusterfs GlusterFS backend
tpm TPM support
- libssh2 ssh block device support
+ libssh ssh block device support
numa libnuma support
libxml2 for Parallels image format
tcmalloc tcmalloc support
@@ -3914,43 +3914,34 @@ EOF
fi
##########################################
-# libssh2 probe
-min_libssh2_version=1.2.8
-if test "$libssh2" != "no" ; then
- if $pkg_config --atleast-version=$min_libssh2_version libssh2; then
- libssh2_cflags=$($pkg_config libssh2 --cflags)
- libssh2_libs=$($pkg_config libssh2 --libs)
- libssh2=yes
+# libssh probe
+if test "$libssh" != "no" ; then
+ if $pkg_config --exists libssh; then
+ libssh_cflags=$($pkg_config libssh --cflags)
+ libssh_libs=$($pkg_config libssh --libs)
+ libssh=yes
else
- if test "$libssh2" = "yes" ; then
- error_exit "libssh2 >= $min_libssh2_version required for
--enable-libssh2"
+ if test "$libssh" = "yes" ; then
+ error_exit "libssh required for --enable-libssh"
fi
- libssh2=no
+ libssh=no
fi
fi
##########################################
-# libssh2_sftp_fsync probe
+# Check for libssh 0.8
+# This is done like this instead of using the LIBSSH_VERSION_* and
+# SSH_VERSION_* macros because some distributions in the past shipped
+# snapshots of the future 0.8 from Git, and those snapshots did not
+# have updated version numbers (still referring to 0.7.0).
-if test "$libssh2" = "yes"; then
+if test "$libssh" = "yes"; then
cat > $TMPC <<EOF
-#include <stdio.h>
-#include <libssh2.h>
-#include <libssh2_sftp.h>
-int main(void) {
- LIBSSH2_SESSION *session;
- LIBSSH2_SFTP *sftp;
- LIBSSH2_SFTP_HANDLE *sftp_handle;
- session = libssh2_session_init ();
- sftp = libssh2_sftp_init (session);
- sftp_handle = libssh2_sftp_open (sftp, "/", 0, 0);
- libssh2_sftp_fsync (sftp_handle);
- return 0;
-}
+#include <libssh/libssh.h>
+int main(void) { return ssh_get_server_publickey(NULL, NULL); }
EOF
- # libssh2_cflags/libssh2_libs defined in previous test.
- if compile_prog "$libssh2_cflags" "$libssh2_libs" ; then
- QEMU_CFLAGS="-DHAS_LIBSSH2_SFTP_FSYNC $QEMU_CFLAGS"
+ if compile_prog "$libssh_cflags" "$libssh_libs"; then
+ libssh_cflags="-DHAVE_LIBSSH_0_8 $libssh_cflags"
fi
fi
@@ -6451,7 +6442,7 @@ echo "GlusterFS support $glusterfs"
echo "gcov $gcov_tool"
echo "gcov enabled $gcov"
echo "TPM support $tpm"
-echo "libssh2 support $libssh2"
+echo "libssh support $libssh"
echo "QOM debugging $qom_cast_debug"
echo "Live block migration $live_block_migration"
echo "lzo support $lzo"
@@ -7144,10 +7135,10 @@ if test "$glusterfs_iocb_has_stat" = "yes" ; then
echo "CONFIG_GLUSTERFS_IOCB_HAS_STAT=y" >> $config_host_mak
fi
-if test "$libssh2" = "yes" ; then
- echo "CONFIG_LIBSSH2=m" >> $config_host_mak
- echo "LIBSSH2_CFLAGS=$libssh2_cflags" >> $config_host_mak
- echo "LIBSSH2_LIBS=$libssh2_libs" >> $config_host_mak
+if test "$libssh" = "yes" ; then
+ echo "CONFIG_LIBSSH=m" >> $config_host_mak
+ echo "LIBSSH_CFLAGS=$libssh_cflags" >> $config_host_mak
+ echo "LIBSSH_LIBS=$libssh_libs" >> $config_host_mak
fi
if test "$live_block_migration" = "yes" ; then
diff --git a/block/Makefile.objs b/block/Makefile.objs
index dbd1522722..35f3bca4d9 100644
--- a/block/Makefile.objs
+++ b/block/Makefile.objs
@@ -31,7 +31,7 @@ block-obj-$(CONFIG_CURL) += curl.o
block-obj-$(CONFIG_RBD) += rbd.o
block-obj-$(CONFIG_GLUSTERFS) += gluster.o
block-obj-$(CONFIG_VXHS) += vxhs.o
-block-obj-$(CONFIG_LIBSSH2) += ssh.o
+block-obj-$(CONFIG_LIBSSH) += ssh.o
block-obj-y += accounting.o dirty-bitmap.o
block-obj-y += write-threshold.o
block-obj-y += backup.o
@@ -52,8 +52,8 @@ rbd.o-libs := $(RBD_LIBS)
gluster.o-cflags := $(GLUSTERFS_CFLAGS)
gluster.o-libs := $(GLUSTERFS_LIBS)
vxhs.o-libs := $(VXHS_LIBS)
-ssh.o-cflags := $(LIBSSH2_CFLAGS)
-ssh.o-libs := $(LIBSSH2_LIBS)
+ssh.o-cflags := $(LIBSSH_CFLAGS)
+ssh.o-libs := $(LIBSSH_LIBS)
block-obj-dmg-bz2-$(CONFIG_BZIP2) += dmg-bz2.o
block-obj-$(if $(CONFIG_DMG),m,n) += $(block-obj-dmg-bz2-y)
dmg-bz2.o-libs := $(BZIP2_LIBS)
diff --git a/block/ssh.c b/block/ssh.c
index 6da7b9cbfe..501933b855 100644
--- a/block/ssh.c
+++ b/block/ssh.c
@@ -24,8 +24,8 @@
#include "qemu/osdep.h"
-#include <libssh2.h>
-#include <libssh2_sftp.h>
+#include <libssh/libssh.h>
+#include <libssh/sftp.h>
#include "block/block_int.h"
#include "block/qdict.h"
@@ -46,13 +46,11 @@
#include "trace.h"
/*
- * TRACE_LIBSSH2=<bitmask> enables tracing in libssh2 itself. Note
- * that this requires that libssh2 was specially compiled with the
- * `./configure --enable-debug' option, so most likely you will have
- * to compile it yourself. The meaning of <bitmask> is described
- * here: http://www.libssh2.org/libssh2_trace.html
+ * TRACE_LIBSSH=<level> enables tracing in libssh itself.
+ * The meaning of <level> is described here:
+ * http://api.libssh.org/master/group__libssh__log.html
*/
-#define TRACE_LIBSSH2 0 /* or try: LIBSSH2_TRACE_SFTP */
+#define TRACE_LIBSSH 0 /* see: SSH_LOG_* */
typedef struct BDRVSSHState {
/* Coroutine. */
@@ -60,18 +58,15 @@ typedef struct BDRVSSHState {
/* SSH connection. */
int sock; /* socket */
- LIBSSH2_SESSION *session; /* ssh session */
- LIBSSH2_SFTP *sftp; /* sftp session */
- LIBSSH2_SFTP_HANDLE *sftp_handle; /* sftp remote file handle */
+ ssh_session session; /* ssh session */
+ sftp_session sftp; /* sftp session */
+ sftp_file sftp_handle; /* sftp remote file handle */
- /* See ssh_seek() function below. */
- int64_t offset;
- bool offset_op_read;
-
- /* File attributes at open. We try to keep the .filesize field
+ /*
+ * File attributes at open. We try to keep the .size field
* updated if it changes (eg by writing at the end of the file).
*/
- LIBSSH2_SFTP_ATTRIBUTES attrs;
+ sftp_attributes attrs;
InetSocketAddress *inet;
@@ -91,7 +86,6 @@ static void ssh_state_init(BDRVSSHState *s)
{
memset(s, 0, sizeof *s);
s->sock = -1;
- s->offset = -1;
qemu_co_mutex_init(&s->lock);
}
@@ -99,20 +93,18 @@ static void ssh_state_free(BDRVSSHState *s)
{
g_free(s->user);
+ if (s->attrs) {
+ sftp_attributes_free(s->attrs);
+ }
if (s->sftp_handle) {
- libssh2_sftp_close(s->sftp_handle);
+ sftp_close(s->sftp_handle);
}
if (s->sftp) {
- libssh2_sftp_shutdown(s->sftp);
+ sftp_free(s->sftp);
}
if (s->session) {
- libssh2_session_disconnect(s->session,
- "from qemu ssh client: "
- "user closed the connection");
- libssh2_session_free(s->session);
- }
- if (s->sock >= 0) {
- close(s->sock);
+ ssh_disconnect(s->session);
+ ssh_free(s->session); /* This frees s->sock */
}
}
@@ -127,13 +119,13 @@ session_error_setg(Error **errp, BDRVSSHState *s, const
char *fs, ...)
va_end(args);
if (s->session) {
- char *ssh_err;
+ const char *ssh_err;
int ssh_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- error_setg(errp, "%s: %s (libssh2 error code: %d)",
+ /* This is not an errno. See <libssh/libssh.h>. */
+ ssh_err = ssh_get_error(s->session);
+ ssh_err_code = ssh_get_error_code(s->session);
+ error_setg(errp, "%s: %s (libssh error code: %d)",
msg, ssh_err, ssh_err_code);
} else {
error_setg(errp, "%s", msg);
@@ -152,18 +144,18 @@ sftp_error_setg(Error **errp, BDRVSSHState *s, const char
*fs, ...)
va_end(args);
if (s->sftp) {
- char *ssh_err;
+ const char *ssh_err;
int ssh_err_code;
- unsigned long sftp_err_code;
+ int sftp_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- /* See <libssh2_sftp.h>. */
- sftp_err_code = libssh2_sftp_last_error((s)->sftp);
+ /* This is not an errno. See <libssh/libssh.h>. */
+ ssh_err = ssh_get_error(s->session);
+ ssh_err_code = ssh_get_error_code(s->session);
+ /* See <libssh/sftp.h>. */
+ sftp_err_code = sftp_get_error(s->sftp);
error_setg(errp,
- "%s: %s (libssh2 error code: %d, sftp error code: %lu)",
+ "%s: %s (libssh error code: %d, sftp error code: %d)",
msg, ssh_err, ssh_err_code, sftp_err_code);
} else {
error_setg(errp, "%s", msg);
@@ -173,15 +165,15 @@ sftp_error_setg(Error **errp, BDRVSSHState *s, const char
*fs, ...)
static void sftp_error_trace(BDRVSSHState *s, const char *op)
{
- char *ssh_err;
+ const char *ssh_err;
int ssh_err_code;
- unsigned long sftp_err_code;
+ int sftp_err_code;
- /* This is not an errno. See <libssh2.h>. */
- ssh_err_code = libssh2_session_last_error(s->session,
- &ssh_err, NULL, 0);
- /* See <libssh2_sftp.h>. */
- sftp_err_code = libssh2_sftp_last_error((s)->sftp);
+ /* This is not an errno. See <libssh/libssh.h>. */
+ ssh_err = ssh_get_error(s->session);
+ ssh_err_code = ssh_get_error_code(s->session);
+ /* See <libssh/sftp.h>. */
+ sftp_err_code = sftp_get_error(s->sftp);
trace_sftp_error(op, ssh_err, ssh_err_code, sftp_err_code);
}
@@ -282,82 +274,120 @@ static void ssh_parse_filename(const char *filename,
QDict *options,
parse_uri(filename, options, errp);
}
-static int check_host_key_knownhosts(BDRVSSHState *s,
- const char *host, int port, Error **errp)
+static int check_host_key_knownhosts(BDRVSSHState *s, Error **errp)
{
- const char *home;
- char *knh_file = NULL;
- LIBSSH2_KNOWNHOSTS *knh = NULL;
- struct libssh2_knownhost *found;
- int ret, r;
- const char *hostkey;
- size_t len;
- int type;
-
- hostkey = libssh2_session_hostkey(s->session, &len, &type);
- if (!hostkey) {
+ int ret;
+#ifdef HAVE_LIBSSH_0_8
+ enum ssh_known_hosts_e state;
+ int r;
+ ssh_key pubkey;
+ enum ssh_keytypes_e pubkey_type;
+ unsigned char *server_hash = NULL;
+ size_t server_hash_len;
+ char *fingerprint = NULL;
+
+ state = ssh_session_is_known_server(s->session);
+ trace_ssh_server_status(state);
+
+ switch (state) {
+ case SSH_KNOWN_HOSTS_OK:
+ /* OK */
+ trace_ssh_check_host_key_knownhosts();
+ break;
+ case SSH_KNOWN_HOSTS_CHANGED:
ret = -EINVAL;
- session_error_setg(errp, s, "failed to read remote host key");
+ r = ssh_get_server_publickey(s->session, &pubkey);
+ if (r == 0) {
+ r = ssh_get_publickey_hash(pubkey, SSH_PUBLICKEY_HASH_SHA256,
+ &server_hash, &server_hash_len);
+ pubkey_type = ssh_key_type(pubkey);
+ ssh_key_free(pubkey);
+ }
+ if (r == 0) {
+ fingerprint = ssh_get_fingerprint_hash(SSH_PUBLICKEY_HASH_SHA256,
+ server_hash,
+ server_hash_len);
+ ssh_clean_pubkey_hash(&server_hash);
+ }
+ if (fingerprint) {
+ error_setg(errp,
+ "host key (%s key with fingerprint %s) does not match "
+ "the one in known_hosts; this may be a possible attack",
+ ssh_key_type_to_char(pubkey_type), fingerprint);
+ ssh_string_free_char(fingerprint);
+ } else {
+ error_setg(errp,
+ "host key does not match the one in known_hosts; this "
+ "may be a possible attack");
+ }
goto out;
- }
-
- knh = libssh2_knownhost_init(s->session);
- if (!knh) {
+ case SSH_KNOWN_HOSTS_OTHER:
ret = -EINVAL;
- session_error_setg(errp, s,
- "failed to initialize known hosts support");
+ error_setg(errp,
+ "host key for this server not found, another type exists");
+ goto out;
+ case SSH_KNOWN_HOSTS_UNKNOWN:
+ ret = -EINVAL;
+ error_setg(errp, "no host key was found in known_hosts");
+ goto out;
+ case SSH_KNOWN_HOSTS_NOT_FOUND:
+ ret = -ENOENT;
+ error_setg(errp, "known_hosts file not found");
+ goto out;
+ case SSH_KNOWN_HOSTS_ERROR:
+ ret = -EINVAL;
+ error_setg(errp, "error while checking the host");
+ goto out;
+ default:
+ ret = -EINVAL;
+ error_setg(errp, "error while checking for known server (%d)", state);
goto out;
}
+#else /* !HAVE_LIBSSH_0_8 */
+ int state;
- home = getenv("HOME");
- if (home) {
- knh_file = g_strdup_printf("%s/.ssh/known_hosts", home);
- } else {
- knh_file = g_strdup_printf("/root/.ssh/known_hosts");
- }
-
- /* Read all known hosts from OpenSSH-style known_hosts file. */
- libssh2_knownhost_readfile(knh, knh_file, LIBSSH2_KNOWNHOST_FILE_OPENSSH);
+ state = ssh_is_server_known(s->session);
+ trace_ssh_server_status(state);
- r = libssh2_knownhost_checkp(knh, host, port, hostkey, len,
- LIBSSH2_KNOWNHOST_TYPE_PLAIN|
- LIBSSH2_KNOWNHOST_KEYENC_RAW,
- &found);
- switch (r) {
- case LIBSSH2_KNOWNHOST_CHECK_MATCH:
+ switch (state) {
+ case SSH_SERVER_KNOWN_OK:
/* OK */
- trace_ssh_check_host_key_knownhosts(found->key);
+ trace_ssh_check_host_key_knownhosts();
break;
- case LIBSSH2_KNOWNHOST_CHECK_MISMATCH:
+ case SSH_SERVER_KNOWN_CHANGED:
ret = -EINVAL;
- session_error_setg(errp, s,
- "host key does not match the one in known_hosts"
- " (found key %s)", found->key);
+ error_setg(errp,
+ "host key does not match the one in known_hosts; this "
+ "may be a possible attack");
goto out;
- case LIBSSH2_KNOWNHOST_CHECK_NOTFOUND:
+ case SSH_SERVER_FOUND_OTHER:
ret = -EINVAL;
- session_error_setg(errp, s, "no host key was found in known_hosts");
+ error_setg(errp,
+ "host key for this server not found, another type exists");
+ goto out;
+ case SSH_SERVER_FILE_NOT_FOUND:
+ ret = -ENOENT;
+ error_setg(errp, "known_hosts file not found");
goto out;
- case LIBSSH2_KNOWNHOST_CHECK_FAILURE:
+ case SSH_SERVER_NOT_KNOWN:
ret = -EINVAL;
- session_error_setg(errp, s,
- "failure matching the host key with known_hosts");
+ error_setg(errp, "no host key was found in known_hosts");
+ goto out;
+ case SSH_SERVER_ERROR:
+ ret = -EINVAL;
+ error_setg(errp, "server error");
goto out;
default:
ret = -EINVAL;
- session_error_setg(errp, s, "unknown error matching the host key"
- " with known_hosts (%d)", r);
+ error_setg(errp, "error while checking for known server (%d)", state);
goto out;
}
+#endif /* !HAVE_LIBSSH_0_8 */
/* known_hosts checking successful. */
ret = 0;
out:
- if (knh != NULL) {
- libssh2_knownhost_free(knh);
- }
- g_free(knh_file);
return ret;
}
@@ -401,18 +431,34 @@ static int compare_fingerprint(const unsigned char
*fingerprint, size_t len,
static int
check_host_key_hash(BDRVSSHState *s, const char *hash,
- int hash_type, size_t fingerprint_len, Error **errp)
+ enum ssh_publickey_hash_type type, Error **errp)
{
- const char *fingerprint;
-
- fingerprint = libssh2_hostkey_hash(s->session, hash_type);
- if (!fingerprint) {
+ int r;
+ ssh_key pubkey;
+ unsigned char *server_hash;
+ size_t server_hash_len;
+
+#ifdef HAVE_LIBSSH_0_8
+ r = ssh_get_server_publickey(s->session, &pubkey);
+#else
+ r = ssh_get_publickey(s->session, &pubkey);
+#endif
+ if (r != SSH_OK) {
session_error_setg(errp, s, "failed to read remote host key");
return -EINVAL;
}
- if(compare_fingerprint((unsigned char *) fingerprint, fingerprint_len,
- hash) != 0) {
+ r = ssh_get_publickey_hash(pubkey, type, &server_hash, &server_hash_len);
+ ssh_key_free(pubkey);
+ if (r != 0) {
+ session_error_setg(errp, s,
+ "failed reading the hash of the server SSH key");
+ return -EINVAL;
+ }
+
+ r = compare_fingerprint(server_hash, server_hash_len, hash);
+ ssh_clean_pubkey_hash(&server_hash);
+ if (r != 0) {
error_setg(errp, "remote host key does not match host_key_check '%s'",
hash);
return -EPERM;
@@ -421,8 +467,7 @@ check_host_key_hash(BDRVSSHState *s, const char *hash,
return 0;
}
-static int check_host_key(BDRVSSHState *s, const char *host, int port,
- SshHostKeyCheck *hkc, Error **errp)
+static int check_host_key(BDRVSSHState *s, SshHostKeyCheck *hkc, Error **errp)
{
SshHostKeyCheckMode mode;
@@ -438,15 +483,15 @@ static int check_host_key(BDRVSSHState *s, const char
*host, int port,
case SSH_HOST_KEY_CHECK_MODE_HASH:
if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_MD5) {
return check_host_key_hash(s, hkc->u.hash.hash,
- LIBSSH2_HOSTKEY_HASH_MD5, 16, errp);
+ SSH_PUBLICKEY_HASH_MD5, errp);
} else if (hkc->u.hash.type == SSH_HOST_KEY_CHECK_HASH_TYPE_SHA1) {
return check_host_key_hash(s, hkc->u.hash.hash,
- LIBSSH2_HOSTKEY_HASH_SHA1, 20, errp);
+ SSH_PUBLICKEY_HASH_SHA1, errp);
}
g_assert_not_reached();
break;
case SSH_HOST_KEY_CHECK_MODE_KNOWN_HOSTS:
- return check_host_key_knownhosts(s, host, port, errp);
+ return check_host_key_knownhosts(s, errp);
default:
g_assert_not_reached();
}
@@ -454,60 +499,43 @@ static int check_host_key(BDRVSSHState *s, const char
*host, int port,
return -EINVAL;
}
-static int authenticate(BDRVSSHState *s, const char *user, Error **errp)
+static int authenticate(BDRVSSHState *s, Error **errp)
{
int r, ret;
- const char *userauthlist;
- LIBSSH2_AGENT *agent = NULL;
- struct libssh2_agent_publickey *identity;
- struct libssh2_agent_publickey *prev_identity = NULL;
+ int method;
- userauthlist = libssh2_userauth_list(s->session, user, strlen(user));
- if (strstr(userauthlist, "publickey") == NULL) {
+ /* Try to authenticate with the "none" method. */
+ r = ssh_userauth_none(s->session, NULL);
+ if (r == SSH_AUTH_ERROR) {
ret = -EPERM;
- error_setg(errp,
- "remote server does not support \"publickey\" authentication");
+ session_error_setg(errp, s, "failed to authenticate using none "
+ "authentication");
goto out;
- }
-
- /* Connect to ssh-agent and try each identity in turn. */
- agent = libssh2_agent_init(s->session);
- if (!agent) {
- ret = -EINVAL;
- session_error_setg(errp, s, "failed to initialize ssh-agent support");
- goto out;
- }
- if (libssh2_agent_connect(agent)) {
- ret = -ECONNREFUSED;
- session_error_setg(errp, s, "failed to connect to ssh-agent");
- goto out;
- }
- if (libssh2_agent_list_identities(agent)) {
- ret = -EINVAL;
- session_error_setg(errp, s,
- "failed requesting identities from ssh-agent");
+ } else if (r == SSH_AUTH_SUCCESS) {
+ /* Authenticated! */
+ ret = 0;
goto out;
}
- for(;;) {
- r = libssh2_agent_get_identity(agent, &identity, prev_identity);
- if (r == 1) { /* end of list */
- break;
- }
- if (r < 0) {
+ method = ssh_userauth_list(s->session, NULL);
+ trace_ssh_auth_methods(method);
+
+ /*
+ * Try to authenticate with publickey, using the ssh-agent
+ * if available.
+ */
+ if (method & SSH_AUTH_METHOD_PUBLICKEY) {
+ r = ssh_userauth_publickey_auto(s->session, NULL, NULL);
+ if (r == SSH_AUTH_ERROR) {
ret = -EINVAL;
- session_error_setg(errp, s,
- "failed to obtain identity from ssh-agent");
+ session_error_setg(errp, s, "failed to authenticate using "
+ "publickey authentication");
goto out;
- }
- r = libssh2_agent_userauth(agent, user, identity);
- if (r == 0) {
+ } else if (r == SSH_AUTH_SUCCESS) {
/* Authenticated! */
ret = 0;
goto out;
}
- /* Failed to authenticate with this identity, try the next one. */
- prev_identity = identity;
}
ret = -EPERM;
@@ -515,13 +543,6 @@ static int authenticate(BDRVSSHState *s, const char *user,
Error **errp)
"and the identities held by your ssh-agent");
out:
- if (agent != NULL) {
- /* Note: libssh2 implementation implicitly calls
- * libssh2_agent_disconnect if necessary.
- */
- libssh2_agent_free(agent);
- }
-
return ret;
}
@@ -640,7 +661,8 @@ static int connect_to_ssh(BDRVSSHState *s,
BlockdevOptionsSsh *opts,
int ssh_flags, int creat_mode, Error **errp)
{
int r, ret;
- long port = 0;
+ unsigned int port = 0;
+ int new_sock = -1;
if (opts->has_user) {
s->user = g_strdup(opts->user);
@@ -657,71 +679,147 @@ static int connect_to_ssh(BDRVSSHState *s,
BlockdevOptionsSsh *opts,
s->inet = opts->server;
opts->server = NULL;
- if (qemu_strtol(s->inet->port, NULL, 10, &port) < 0) {
+ if (qemu_strtoui(s->inet->port, NULL, 10, &port) < 0) {
error_setg(errp, "Use only numeric port value");
ret = -EINVAL;
goto err;
}
/* Open the socket and connect. */
- s->sock = inet_connect_saddr(s->inet, errp);
- if (s->sock < 0) {
+ new_sock = inet_connect_saddr(s->inet, errp);
+ if (new_sock < 0) {
ret = -EIO;
goto err;
}
+ /*
+ * Try to disable the Nagle algorithm on TCP sockets to reduce latency,
+ * but do not fail if it cannot be disabled.
+ */
+ r = socket_set_nodelay(new_sock);
+ if (r < 0) {
+ warn_report("can't set TCP_NODELAY for the ssh server %s: %s",
+ s->inet->host, strerror(errno));
+ }
+
/* Create SSH session. */
- s->session = libssh2_session_init();
+ s->session = ssh_new();
if (!s->session) {
ret = -EINVAL;
- session_error_setg(errp, s, "failed to initialize libssh2 session");
+ session_error_setg(errp, s, "failed to initialize libssh session");
goto err;
}
-#if TRACE_LIBSSH2 != 0
- libssh2_trace(s->session, TRACE_LIBSSH2);
-#endif
+ /*
+ * Make sure we are in blocking mode during the connection and
+ * authentication phases.
+ */
+ ssh_set_blocking(s->session, 1);
- r = libssh2_session_handshake(s->session, s->sock);
- if (r != 0) {
+ r = ssh_options_set(s->session, SSH_OPTIONS_USER, s->user);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the user in the libssh session");
+ goto err;
+ }
+
+ r = ssh_options_set(s->session, SSH_OPTIONS_HOST, s->inet->host);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the host in the libssh session");
+ goto err;
+ }
+
+ if (port > 0) {
+ r = ssh_options_set(s->session, SSH_OPTIONS_PORT, &port);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the port in the libssh session");
+ goto err;
+ }
+ }
+
+ r = ssh_options_set(s->session, SSH_OPTIONS_COMPRESSION, "none");
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to disable the compression in the libssh "
+ "session");
+ goto err;
+ }
+
+ /* Read ~/.ssh/config. */
+ r = ssh_options_parse_config(s->session, NULL);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s, "failed to parse ~/.ssh/config");
+ goto err;
+ }
+
+ r = ssh_options_set(s->session, SSH_OPTIONS_FD, &new_sock);
+ if (r < 0) {
+ ret = -EINVAL;
+ session_error_setg(errp, s,
+ "failed to set the socket in the libssh session");
+ goto err;
+ }
+ /* libssh took ownership of the socket. */
+ s->sock = new_sock;
+ new_sock = -1;
+
+ /* Connect. */
+ r = ssh_connect(s->session);
+ if (r != SSH_OK) {
ret = -EINVAL;
session_error_setg(errp, s, "failed to establish SSH session");
goto err;
}
/* Check the remote host's key against known_hosts. */
- ret = check_host_key(s, s->inet->host, port, opts->host_key_check, errp);
+ ret = check_host_key(s, opts->host_key_check, errp);
if (ret < 0) {
goto err;
}
/* Authenticate. */
- ret = authenticate(s, s->user, errp);
+ ret = authenticate(s, errp);
if (ret < 0) {
goto err;
}
/* Start SFTP. */
- s->sftp = libssh2_sftp_init(s->session);
+ s->sftp = sftp_new(s->session);
if (!s->sftp) {
- session_error_setg(errp, s, "failed to initialize sftp handle");
+ session_error_setg(errp, s, "failed to create sftp handle");
+ ret = -EINVAL;
+ goto err;
+ }
+
+ r = sftp_init(s->sftp);
+ if (r < 0) {
+ sftp_error_setg(errp, s, "failed to initialize sftp handle");
ret = -EINVAL;
goto err;
}
/* Open the remote file. */
trace_ssh_connect_to_ssh(opts->path, ssh_flags, creat_mode);
- s->sftp_handle = libssh2_sftp_open(s->sftp, opts->path, ssh_flags,
- creat_mode);
+ s->sftp_handle = sftp_open(s->sftp, opts->path, ssh_flags, creat_mode);
if (!s->sftp_handle) {
- session_error_setg(errp, s, "failed to open remote file '%s'",
- opts->path);
+ sftp_error_setg(errp, s, "failed to open remote file '%s'",
+ opts->path);
ret = -EINVAL;
goto err;
}
- r = libssh2_sftp_fstat(s->sftp_handle, &s->attrs);
- if (r < 0) {
+ /* Make sure the SFTP file is handled in blocking mode. */
+ sftp_file_set_blocking(s->sftp_handle);
+
+ s->attrs = sftp_fstat(s->sftp_handle);
+ if (!s->attrs) {
sftp_error_setg(errp, s, "failed to read file attributes");
return -EINVAL;
}
@@ -729,21 +827,27 @@ static int connect_to_ssh(BDRVSSHState *s,
BlockdevOptionsSsh *opts,
return 0;
err:
+ if (s->attrs) {
+ sftp_attributes_free(s->attrs);
+ }
+ s->attrs = NULL;
if (s->sftp_handle) {
- libssh2_sftp_close(s->sftp_handle);
+ sftp_close(s->sftp_handle);
}
s->sftp_handle = NULL;
if (s->sftp) {
- libssh2_sftp_shutdown(s->sftp);
+ sftp_free(s->sftp);
}
s->sftp = NULL;
if (s->session) {
- libssh2_session_disconnect(s->session,
- "from qemu ssh client: "
- "error opening connection");
- libssh2_session_free(s->session);
+ ssh_disconnect(s->session);
+ ssh_free(s->session);
}
s->session = NULL;
+ s->sock = -1;
+ if (new_sock >= 0) {
+ close(new_sock);
+ }
return ret;
}
@@ -758,9 +862,11 @@ static int ssh_file_open(BlockDriverState *bs, QDict
*options, int bdrv_flags,
ssh_state_init(s);
- ssh_flags = LIBSSH2_FXF_READ;
+ ssh_flags = 0;
if (bdrv_flags & BDRV_O_RDWR) {
- ssh_flags |= LIBSSH2_FXF_WRITE;
+ ssh_flags |= O_RDWR;
+ } else {
+ ssh_flags |= O_RDONLY;
}
opts = ssh_parse_options(options, errp);
@@ -775,18 +881,13 @@ static int ssh_file_open(BlockDriverState *bs, QDict
*options, int bdrv_flags,
}
/* Go non-blocking. */
- libssh2_session_set_blocking(s->session, 0);
+ ssh_set_blocking(s->session, 0);
qapi_free_BlockdevOptionsSsh(opts);
return 0;
err:
- if (s->sock >= 0) {
- close(s->sock);
- }
- s->sock = -1;
-
qapi_free_BlockdevOptionsSsh(opts);
return ret;
@@ -797,25 +898,25 @@ static int ssh_grow_file(BDRVSSHState *s, int64_t offset,
Error **errp)
{
ssize_t ret;
char c[1] = { '\0' };
- int was_blocking = libssh2_session_get_blocking(s->session);
+ int was_blocking = ssh_is_blocking(s->session);
/* offset must be strictly greater than the current size so we do
* not overwrite anything */
- assert(offset > 0 && offset > s->attrs.filesize);
+ assert(offset > 0 && offset > s->attrs->size);
- libssh2_session_set_blocking(s->session, 1);
+ ssh_set_blocking(s->session, 1);
- libssh2_sftp_seek64(s->sftp_handle, offset - 1);
- ret = libssh2_sftp_write(s->sftp_handle, c, 1);
+ sftp_seek64(s->sftp_handle, offset - 1);
+ ret = sftp_write(s->sftp_handle, c, 1);
- libssh2_session_set_blocking(s->session, was_blocking);
+ ssh_set_blocking(s->session, was_blocking);
if (ret < 0) {
sftp_error_setg(errp, s, "Failed to grow file");
return -EIO;
}
- s->attrs.filesize = offset;
+ s->attrs->size = offset;
return 0;
}
@@ -843,8 +944,7 @@ static int ssh_co_create(BlockdevCreateOptions *options,
Error **errp)
ssh_state_init(&s);
ret = connect_to_ssh(&s, opts->location,
- LIBSSH2_FXF_READ|LIBSSH2_FXF_WRITE|
- LIBSSH2_FXF_CREAT|LIBSSH2_FXF_TRUNC,
+ O_RDWR | O_CREAT | O_TRUNC,
0644, errp);
if (ret < 0) {
goto fail;
@@ -913,10 +1013,8 @@ static int ssh_has_zero_init(BlockDriverState *bs)
/* Assume false, unless we can positively prove it's true. */
int has_zero_init = 0;
- if (s->attrs.flags & LIBSSH2_SFTP_ATTR_PERMISSIONS) {
- if (s->attrs.permissions & LIBSSH2_SFTP_S_IFREG) {
- has_zero_init = 1;
- }
+ if (s->attrs->type == SSH_FILEXFER_TYPE_REGULAR) {
+ has_zero_init = 1;
}
return has_zero_init;
@@ -953,12 +1051,12 @@ static coroutine_fn void co_yield(BDRVSSHState *s,
BlockDriverState *bs)
.co = qemu_coroutine_self()
};
- r = libssh2_session_block_directions(s->session);
+ r = ssh_get_poll_flags(s->session);
- if (r & LIBSSH2_SESSION_BLOCK_INBOUND) {
+ if (r & SSH_READ_PENDING) {
rd_handler = restart_coroutine;
}
- if (r & LIBSSH2_SESSION_BLOCK_OUTBOUND) {
+ if (r & SSH_WRITE_PENDING) {
wr_handler = restart_coroutine;
}
@@ -970,33 +1068,6 @@ static coroutine_fn void co_yield(BDRVSSHState *s,
BlockDriverState *bs)
trace_ssh_co_yield_back(s->sock);
}
-/* SFTP has a function `libssh2_sftp_seek64' which seeks to a position
- * in the remote file. Notice that it just updates a field in the
- * sftp_handle structure, so there is no network traffic and it cannot
- * fail.
- *
- * However, `libssh2_sftp_seek64' does have a catastrophic effect on
- * performance since it causes the handle to throw away all in-flight
- * reads and buffered readahead data. Therefore this function tries
- * to be intelligent about when to call the underlying libssh2 function.
- */
-#define SSH_SEEK_WRITE 0
-#define SSH_SEEK_READ 1
-#define SSH_SEEK_FORCE 2
-
-static void ssh_seek(BDRVSSHState *s, int64_t offset, int flags)
-{
- bool op_read = (flags & SSH_SEEK_READ) != 0;
- bool force = (flags & SSH_SEEK_FORCE) != 0;
-
- if (force || op_read != s->offset_op_read || offset != s->offset) {
- trace_ssh_seek(offset);
- libssh2_sftp_seek64(s->sftp_handle, offset);
- s->offset = offset;
- s->offset_op_read = op_read;
- }
-}
-
static coroutine_fn int ssh_read(BDRVSSHState *s, BlockDriverState *bs,
int64_t offset, size_t size,
QEMUIOVector *qiov)
@@ -1008,7 +1079,8 @@ static coroutine_fn int ssh_read(BDRVSSHState *s,
BlockDriverState *bs,
trace_ssh_read(offset, size);
- ssh_seek(s, offset, SSH_SEEK_READ);
+ trace_ssh_seek(offset);
+ sftp_seek64(s->sftp_handle, offset);
/* This keeps track of the current iovec element ('i'), where we
* will write to next ('buf'), and the end of the current iovec
@@ -1018,35 +1090,35 @@ static coroutine_fn int ssh_read(BDRVSSHState *s,
BlockDriverState *bs,
buf = i->iov_base;
end_of_vec = i->iov_base + i->iov_len;
- /* libssh2 has a hard-coded limit of 2000 bytes per request,
- * although it will also do readahead behind our backs. Therefore
- * we may have to do repeated reads here until we have read 'size'
- * bytes.
- */
for (got = 0; got < size; ) {
+ size_t request_read_size;
again:
- trace_ssh_read_buf(buf, end_of_vec - buf);
- r = libssh2_sftp_read(s->sftp_handle, buf, end_of_vec - buf);
- trace_ssh_read_return(r);
+ /*
+ * The size of SFTP packets is limited to 32K bytes, so limit
+ * the amount of data requested to 16K, as libssh currently
+ * does not handle multiple requests on its own.
+ */
+ request_read_size = MIN(end_of_vec - buf, 16384);
+ trace_ssh_read_buf(buf, end_of_vec - buf, request_read_size);
+ r = sftp_read(s->sftp_handle, buf, request_read_size);
+ trace_ssh_read_return(r, sftp_get_error(s->sftp));
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
- if (r < 0) {
- sftp_error_trace(s, "read");
- s->offset = -1;
- return -EIO;
- }
- if (r == 0) {
+ if (r == SSH_EOF || (r == 0 && sftp_get_error(s->sftp) == SSH_FX_EOF))
{
/* EOF: Short read so pad the buffer with zeroes and return it. */
qemu_iovec_memset(qiov, got, 0, size - got);
return 0;
}
+ if (r <= 0) {
+ sftp_error_trace(s, "read");
+ return -EIO;
+ }
got += r;
buf += r;
- s->offset += r;
if (buf >= end_of_vec && got < size) {
i++;
buf = i->iov_base;
@@ -1083,7 +1155,8 @@ static int ssh_write(BDRVSSHState *s, BlockDriverState
*bs,
trace_ssh_write(offset, size);
- ssh_seek(s, offset, SSH_SEEK_WRITE);
+ trace_ssh_seek(offset);
+ sftp_seek64(s->sftp_handle, offset);
/* This keeps track of the current iovec element ('i'), where we
* will read from next ('buf'), and the end of the current iovec
@@ -1094,46 +1167,37 @@ static int ssh_write(BDRVSSHState *s, BlockDriverState
*bs,
end_of_vec = i->iov_base + i->iov_len;
for (written = 0; written < size; ) {
+ size_t request_write_size;
again:
- trace_ssh_write_buf(buf, end_of_vec - buf);
- r = libssh2_sftp_write(s->sftp_handle, buf, end_of_vec - buf);
- trace_ssh_write_return(r);
+ /*
+ * Avoid too large data packets, as libssh currently does not
+ * handle multiple requests on its own.
+ */
+ request_write_size = MIN(end_of_vec - buf, 131072);
+ trace_ssh_write_buf(buf, end_of_vec - buf, request_write_size);
+ r = sftp_write(s->sftp_handle, buf, request_write_size);
+ trace_ssh_write_return(r, sftp_get_error(s->sftp));
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
if (r < 0) {
sftp_error_trace(s, "write");
- s->offset = -1;
return -EIO;
}
- /* The libssh2 API is very unclear about this. A comment in
- * the code says "nothing was acked, and no EAGAIN was
- * received!" which apparently means that no data got sent
- * out, and the underlying channel didn't return any EAGAIN
- * indication. I think this is a bug in either libssh2 or
- * OpenSSH (server-side). In any case, forcing a seek (to
- * discard libssh2 internal buffers), and then trying again
- * works for me.
- */
- if (r == 0) {
- ssh_seek(s, offset + written, SSH_SEEK_WRITE|SSH_SEEK_FORCE);
- co_yield(s, bs);
- goto again;
- }
written += r;
buf += r;
- s->offset += r;
if (buf >= end_of_vec && written < size) {
i++;
buf = i->iov_base;
end_of_vec = i->iov_base + i->iov_len;
}
- if (offset + written > s->attrs.filesize)
- s->attrs.filesize = offset + written;
+ if (offset + written > s->attrs->size) {
+ s->attrs->size = offset + written;
+ }
}
return 0;
@@ -1168,24 +1232,24 @@ static void unsafe_flush_warning(BDRVSSHState *s, const
char *what)
}
}
-#ifdef HAS_LIBSSH2_SFTP_FSYNC
+#ifdef HAVE_LIBSSH_0_8
static coroutine_fn int ssh_flush(BDRVSSHState *s, BlockDriverState *bs)
{
int r;
trace_ssh_flush();
+
+ if (!sftp_extension_supported(s->sftp, "address@hidden", "1")) {
+ unsafe_flush_warning(s, "OpenSSH >= 6.3");
+ return 0;
+ }
again:
- r = libssh2_sftp_fsync(s->sftp_handle);
- if (r == LIBSSH2_ERROR_EAGAIN || r == LIBSSH2_ERROR_TIMEOUT) {
+ r = sftp_fsync(s->sftp_handle);
+ if (r == SSH_AGAIN) {
co_yield(s, bs);
goto again;
}
- if (r == LIBSSH2_ERROR_SFTP_PROTOCOL &&
- libssh2_sftp_last_error(s->sftp) == LIBSSH2_FX_OP_UNSUPPORTED) {
- unsafe_flush_warning(s, "OpenSSH >= 6.3");
- return 0;
- }
if (r < 0) {
sftp_error_trace(s, "fsync");
return -EIO;
@@ -1206,25 +1270,25 @@ static coroutine_fn int ssh_co_flush(BlockDriverState
*bs)
return ret;
}
-#else /* !HAS_LIBSSH2_SFTP_FSYNC */
+#else /* !HAVE_LIBSSH_0_8 */
static coroutine_fn int ssh_co_flush(BlockDriverState *bs)
{
BDRVSSHState *s = bs->opaque;
- unsafe_flush_warning(s, "libssh2 >= 1.4.4");
+ unsafe_flush_warning(s, "libssh >= 0.8.0");
return 0;
}
-#endif /* !HAS_LIBSSH2_SFTP_FSYNC */
+#endif /* !HAVE_LIBSSH_0_8 */
static int64_t ssh_getlength(BlockDriverState *bs)
{
BDRVSSHState *s = bs->opaque;
int64_t length;
- /* Note we cannot make a libssh2 call here. */
- length = (int64_t) s->attrs.filesize;
+ /* Note we cannot make a libssh call here. */
+ length = (int64_t) s->attrs->size;
trace_ssh_getlength(length);
return length;
@@ -1241,12 +1305,12 @@ static int coroutine_fn
ssh_co_truncate(BlockDriverState *bs, int64_t offset,
return -ENOTSUP;
}
- if (offset < s->attrs.filesize) {
+ if (offset < s->attrs->size) {
error_setg(errp, "ssh driver does not support shrinking files");
return -ENOTSUP;
}
- if (offset == s->attrs.filesize) {
+ if (offset == s->attrs->size) {
return 0;
}
@@ -1341,12 +1405,16 @@ static void bdrv_ssh_init(void)
{
int r;
- r = libssh2_init(0);
+ r = ssh_init();
if (r != 0) {
- fprintf(stderr, "libssh2 initialization failed, %d\n", r);
+ fprintf(stderr, "libssh initialization failed, %d\n", r);
exit(EXIT_FAILURE);
}
+#if TRACE_LIBSSH != 0
+ ssh_set_log_level(TRACE_LIBSSH);
+#endif
+
bdrv_register(&bdrv_ssh);
}
diff --git a/.travis.yml b/.travis.yml
index aeb9b211cd..279658b116 100644
--- a/.travis.yml
+++ b/.travis.yml
@@ -31,7 +31,7 @@ addons:
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- - libssh2-1-dev
+ - libssh-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
@@ -270,7 +270,7 @@ matrix:
- libseccomp-dev
- libspice-protocol-dev
- libspice-server-dev
- - libssh2-1-dev
+ - libssh-dev
- liburcu-dev
- libusb-1.0-0-dev
- libvte-2.91-dev
diff --git a/block/trace-events b/block/trace-events
index 9ccea755da..d724df0117 100644
--- a/block/trace-events
+++ b/block/trace-events
@@ -171,19 +171,21 @@ nbd_client_connect_success(const char *export_name)
"export '%s'"
# ssh.c
ssh_restart_coroutine(void *co) "co=%p"
ssh_flush(void) "fsync"
-ssh_check_host_key_knownhosts(const char *key) "host key OK: %s"
+ssh_check_host_key_knownhosts(void) "host key OK"
ssh_connect_to_ssh(char *path, int flags, int mode) "opening file %s
flags=0x%x creat_mode=0%o"
ssh_co_yield(int sock, void *rd_handler, void *wr_handler) "s->sock=%d
rd_handler=%p wr_handler=%p"
ssh_co_yield_back(int sock) "s->sock=%d - back"
ssh_getlength(int64_t length) "length=%" PRIi64
ssh_co_create_opts(uint64_t size) "total_size=%" PRIu64
ssh_read(int64_t offset, size_t size) "offset=%" PRIi64 " size=%zu"
-ssh_read_buf(void *buf, size_t size) "sftp_read buf=%p size=%zu"
-ssh_read_return(ssize_t ret) "sftp_read returned %zd"
+ssh_read_buf(void *buf, size_t size, size_t actual_size) "sftp_read buf=%p
size=%zu (actual size=%zu)"
+ssh_read_return(ssize_t ret, int sftp_err) "sftp_read returned %zd (sftp
error=%d)"
ssh_write(int64_t offset, size_t size) "offset=%" PRIi64 " size=%zu"
-ssh_write_buf(void *buf, size_t size) "sftp_write buf=%p size=%zu"
-ssh_write_return(ssize_t ret) "sftp_write returned %zd"
+ssh_write_buf(void *buf, size_t size, size_t actual_size) "sftp_write buf=%p
size=%zu (actual size=%zu)"
+ssh_write_return(ssize_t ret, int sftp_err) "sftp_write returned %zd (sftp
error=%d)"
ssh_seek(int64_t offset) "seeking to offset=%" PRIi64
+ssh_auth_methods(int methods) "auth methods=0x%x"
+ssh_server_status(int status) "server status=%d"
# curl.c
curl_timer_cb(long timeout_ms) "timer callback timeout_ms %ld"
@@ -216,4 +218,4 @@ sheepdog_snapshot_create(const char *sn_name, const char
*id) "%s %s"
sheepdog_snapshot_create_inode(const char *name, uint32_t snap, uint32_t vdi)
"s->inode: name %s snap_id 0x%" PRIx32 " vdi 0x%" PRIx32
# ssh.c
-sftp_error(const char *op, const char *ssh_err, int ssh_err_code, unsigned
long sftp_err_code) "%s failed: %s (libssh2 error code: %d, sftp error code:
%lu)"
+sftp_error(const char *op, const char *ssh_err, int ssh_err_code, int
sftp_err_code) "%s failed: %s (libssh error code: %d, sftp error code: %d)"
diff --git a/docs/qemu-block-drivers.texi b/docs/qemu-block-drivers.texi
index da06a9bc83..91ab0eceae 100644
--- a/docs/qemu-block-drivers.texi
+++ b/docs/qemu-block-drivers.texi
@@ -782,7 +782,7 @@ print a warning when @code{fsync} is not supported:
warning: ssh server @code{ssh.example.com:22} does not support fsync
-With sufficiently new versions of libssh2 and OpenSSH, @code{fsync} is
+With sufficiently new versions of libssh and OpenSSH, @code{fsync} is
supported.
@node disk_images_nvme
diff --git a/tests/docker/dockerfiles/debian-win32-cross.docker
b/tests/docker/dockerfiles/debian-win32-cross.docker
index dd021f2df0..0a4970c068 100644
--- a/tests/docker/dockerfiles/debian-win32-cross.docker
+++ b/tests/docker/dockerfiles/debian-win32-cross.docker
@@ -15,7 +15,6 @@ RUN DEBIAN_FRONTEND=noninteractive eatmydata \
mxe-$TARGET-w64-mingw32.shared-curl \
mxe-$TARGET-w64-mingw32.shared-glib \
mxe-$TARGET-w64-mingw32.shared-libgcrypt \
- mxe-$TARGET-w64-mingw32.shared-libssh2 \
mxe-$TARGET-w64-mingw32.shared-libusb1 \
mxe-$TARGET-w64-mingw32.shared-lzo \
mxe-$TARGET-w64-mingw32.shared-nettle \
diff --git a/tests/docker/dockerfiles/debian-win64-cross.docker
b/tests/docker/dockerfiles/debian-win64-cross.docker
index 4542bcc821..b27985b1b1 100644
--- a/tests/docker/dockerfiles/debian-win64-cross.docker
+++ b/tests/docker/dockerfiles/debian-win64-cross.docker
@@ -15,7 +15,6 @@ RUN DEBIAN_FRONTEND=noninteractive eatmydata \
mxe-$TARGET-w64-mingw32.shared-curl \
mxe-$TARGET-w64-mingw32.shared-glib \
mxe-$TARGET-w64-mingw32.shared-libgcrypt \
- mxe-$TARGET-w64-mingw32.shared-libssh2 \
mxe-$TARGET-w64-mingw32.shared-libusb1 \
mxe-$TARGET-w64-mingw32.shared-lzo \
mxe-$TARGET-w64-mingw32.shared-nettle \
diff --git a/tests/docker/dockerfiles/fedora.docker
b/tests/docker/dockerfiles/fedora.docker
index 12c460597e..619d1b5656 100644
--- a/tests/docker/dockerfiles/fedora.docker
+++ b/tests/docker/dockerfiles/fedora.docker
@@ -35,7 +35,7 @@ ENV PACKAGES \
libpng-devel \
librbd-devel \
libseccomp-devel \
- libssh2-devel \
+ libssh-devel \
libubsan \
libusbx-devel \
libxml2-devel \
@@ -50,7 +50,6 @@ ENV PACKAGES \
mingw32-gtk3 \
mingw32-libjpeg-turbo \
mingw32-libpng \
- mingw32-libssh2 \
mingw32-libtasn1 \
mingw32-nettle \
mingw32-pixman \
@@ -64,7 +63,6 @@ ENV PACKAGES \
mingw64-gtk3 \
mingw64-libjpeg-turbo \
mingw64-libpng \
- mingw64-libssh2 \
mingw64-libtasn1 \
mingw64-nettle \
mingw64-pixman \
diff --git a/tests/docker/dockerfiles/ubuntu.docker
b/tests/docker/dockerfiles/ubuntu.docker
index 8d256961f0..d3b72209c8 100644
--- a/tests/docker/dockerfiles/ubuntu.docker
+++ b/tests/docker/dockerfiles/ubuntu.docker
@@ -53,7 +53,7 @@ ENV PACKAGES flex bison \
libsnappy-dev \
libspice-protocol-dev \
libspice-server-dev \
- libssh2-1-dev \
+ libssh-dev \
libusb-1.0-0-dev \
libusbredirhost-dev \
libvdeplug-dev \
diff --git a/tests/docker/dockerfiles/ubuntu1804.docker
b/tests/docker/dockerfiles/ubuntu1804.docker
index 2e2900150b..9d80b11500 100644
--- a/tests/docker/dockerfiles/ubuntu1804.docker
+++ b/tests/docker/dockerfiles/ubuntu1804.docker
@@ -40,7 +40,7 @@ ENV PACKAGES flex bison \
libsnappy-dev \
libspice-protocol-dev \
libspice-server-dev \
- libssh2-1-dev \
+ libssh-dev \
libusb-1.0-0-dev \
libusbredirhost-dev \
libvdeplug-dev \
diff --git a/tests/qemu-iotests/207 b/tests/qemu-iotests/207
index b3816136f7..ec8c1d06f0 100755
--- a/tests/qemu-iotests/207
+++ b/tests/qemu-iotests/207
@@ -110,12 +110,49 @@ with iotests.FilePath('t.img') as disk_path, \
iotests.img_info_log(remote_path)
- md5_key = subprocess.check_output(
- 'ssh-keyscan -t rsa 127.0.0.1 2>/dev/null | grep -v "\\^#" | ' +
- 'cut -d" " -f3 | base64 -d | md5sum -b | cut -d" " -f1',
- shell=True).rstrip().decode('ascii')
+ keys = subprocess.check_output(
+ 'ssh-keyscan 127.0.0.1 2>/dev/null | grep -v "\\^#" | ' +
+ 'cut -d" " -f3',
+ shell=True).rstrip().decode('ascii').split('\n')
+
+ # Mappings of base64 representations to digests
+ md5_keys = {}
+ sha1_keys = {}
+
+ for key in keys:
+ md5_keys[key] = subprocess.check_output(
+ 'echo %s | base64 -d | md5sum -b | cut -d" " -f1' % key,
+ shell=True).rstrip().decode('ascii')
+
+ sha1_keys[key] = subprocess.check_output(
+ 'echo %s | base64 -d | sha1sum -b | cut -d" " -f1' % key,
+ shell=True).rstrip().decode('ascii')
vm.launch()
+
+ # Find correct key first
+ matching_key = None
+ for key in keys:
+ result = vm.qmp('blockdev-add',
+ driver='ssh', node_name='node0', path=disk_path,
+ server={
+ 'host': '127.0.0.1',
+ 'port': '22',
+ }, host_key_check={
+ 'mode': 'hash',
+ 'type': 'md5',
+ 'hash': md5_keys[key],
+ })
+
+ if 'error' not in result:
+ vm.qmp('blockdev-del', node_name='node0')
+ matching_key = key
+ break
+
+ if matching_key is None:
+ vm.shutdown()
+ iotests.notrun('Did not find a key that fits 127.0.0.1')
+
blockdev_create(vm, { 'driver': 'ssh',
'location': {
'path': disk_path,
@@ -140,7 +177,7 @@ with iotests.FilePath('t.img') as disk_path, \
'host-key-check': {
'mode': 'hash',
'type': 'md5',
- 'hash': md5_key,
+ 'hash': md5_keys[matching_key],
}
},
'size': 8388608 })
@@ -148,11 +185,6 @@ with iotests.FilePath('t.img') as disk_path, \
iotests.img_info_log(remote_path)
- sha1_key = subprocess.check_output(
- 'ssh-keyscan -t rsa 127.0.0.1 2>/dev/null | grep -v "\\^#" | ' +
- 'cut -d" " -f3 | base64 -d | sha1sum -b | cut -d" " -f1',
- shell=True).rstrip().decode('ascii')
-
vm.launch()
blockdev_create(vm, { 'driver': 'ssh',
'location': {
@@ -178,7 +210,7 @@ with iotests.FilePath('t.img') as disk_path, \
'host-key-check': {
'mode': 'hash',
'type': 'sha1',
- 'hash': sha1_key,
+ 'hash': sha1_keys[matching_key],
}
},
'size': 4194304 })
diff --git a/tests/qemu-iotests/207.out b/tests/qemu-iotests/207.out
index ec9823793a..1239d9d648 100644
--- a/tests/qemu-iotests/207.out
+++ b/tests/qemu-iotests/207.out
@@ -68,7 +68,7 @@ virtual size: 4 MiB (4194304 bytes)
{"execute": "blockdev-create", "arguments": {"job-id": "job0", "options":
{"driver": "ssh", "location": {"host-key-check": {"mode": "none"}, "path":
"/this/is/not/an/existing/path", "server": {"host": "127.0.0.1", "port":
"22"}}, "size": 4194304}}}
{"return": {}}
-Job failed: failed to open remote file '/this/is/not/an/existing/path': Failed
opening remote file (libssh2 error code: -31)
+Job failed: failed to open remote file '/this/is/not/an/existing/path': SFTP
server: No such file (libssh error code: 1, sftp error code: 2)
{"execute": "job-dismiss", "arguments": {"id": "job0"}}
{"return": {}}
--
2.21.0
- [Qemu-block] [PULL v2 0/8] Block patches, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 2/8] blockdev: enable non-root nodes for transaction drive-backup source, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 3/8] iotest 134: test cluster-misaligned encrypted write, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 5/8] vmdk: Reduce the max bound for L1 table size, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 4/8] vmdk: Fix comment regarding max l1_size coverage, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 1/8] nvme: do not advertise support for unsupported arbitration mechanism, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 8/8] iotests: Fix 205 for concurrent runs, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 6/8] vmdk: Add read-only support for seSparse snapshots, Max Reitz, 2019/06/24
- [Qemu-block] [PULL v2 7/8] ssh: switch from libssh2 to libssh,
Max Reitz <=