[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-block] [PULL 06/11] iotests: Fix throttling in 030
From: |
Max Reitz |
Subject: |
[Qemu-block] [PULL 06/11] iotests: Fix throttling in 030 |
Date: |
Mon, 15 Jul 2019 16:29:00 +0200 |
Currently, TestParallelOps in 030 creates images that are too small for
job throttling to be effective. This is reflected by the fact that it
never undoes the throttling.
Increase the image size and undo the throttling when the job should be
completed. Also, add throttling in test_overlapping_4, or the jobs may
not be so overlapping after all. In fact, the error usually emitted
here is that node2 simply does not exist, not that overlapping jobs are
not allowed -- the fact that this job ignores the exact error messages
and just checks the error class is something that should be fixed in a
follow-up patch.
Signed-off-by: Max Reitz <address@hidden>
Tested-by: Andrey Shinkevich <address@hidden>
Reviewed-by: Alberto Garcia <address@hidden>
Message-id: address@hidden
Signed-off-by: Max Reitz <address@hidden>
---
tests/qemu-iotests/030 | 32 +++++++++++++++++++++++++++-----
1 file changed, 27 insertions(+), 5 deletions(-)
diff --git a/tests/qemu-iotests/030 b/tests/qemu-iotests/030
index c6311d1825..2cf8d54dc5 100755
--- a/tests/qemu-iotests/030
+++ b/tests/qemu-iotests/030
@@ -154,7 +154,7 @@ class TestSingleDrive(iotests.QMPTestCase):
class TestParallelOps(iotests.QMPTestCase):
num_ops = 4 # Number of parallel block-stream operations
num_imgs = num_ops * 2 + 1
- image_len = num_ops * 512 * 1024
+ image_len = num_ops * 4 * 1024 * 1024
imgs = []
def setUp(self):
@@ -176,11 +176,11 @@ class TestParallelOps(iotests.QMPTestCase):
# Put data into the images we are copying data from
odd_img_indexes = [x for x in reversed(range(self.num_imgs)) if x % 2
== 1]
for i in range(len(odd_img_indexes)):
- # Alternate between 256KB and 512KB.
+ # Alternate between 2MB and 4MB.
# This way jobs will not finish in the same order they were created
- num_kb = 256 + 256 * (i % 2)
+ num_mb = 2 + 2 * (i % 2)
qemu_io('-f', iotests.imgfmt,
- '-c', 'write -P 0xFF %dk %dk' % (i * 512, num_kb),
+ '-c', 'write -P 0xFF %dM %dM' % (i * 4, num_mb),
self.imgs[odd_img_indexes[i]])
# Attach the drive to the VM
@@ -213,6 +213,10 @@ class TestParallelOps(iotests.QMPTestCase):
result = self.vm.qmp('block-stream', device=node_name,
job_id=job_id, base=self.imgs[i-2], speed=512*1024)
self.assert_qmp(result, 'return', {})
+ for job in pending_jobs:
+ result = self.vm.qmp('block-job-set-speed', device=job, speed=0)
+ self.assert_qmp(result, 'return', {})
+
# Wait for all jobs to be finished.
while len(pending_jobs) > 0:
for event in self.vm.get_qmp_events(wait=True):
@@ -260,6 +264,9 @@ class TestParallelOps(iotests.QMPTestCase):
result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[0], top=self.imgs[1], job_id='commit-node0')
self.assert_qmp(result, 'error/class', 'GenericError')
+ result = self.vm.qmp('block-job-set-speed', device='stream-node4',
speed=0)
+ self.assert_qmp(result, 'return', {})
+
self.wait_until_completed(drive='stream-node4')
self.assert_no_active_block_jobs()
@@ -289,6 +296,9 @@ class TestParallelOps(iotests.QMPTestCase):
result = self.vm.qmp('block-stream', device='drive0',
base=self.imgs[5], job_id='stream-drive0')
self.assert_qmp(result, 'error/class', 'GenericError')
+ result = self.vm.qmp('block-job-set-speed', device='commit-node3',
speed=0)
+ self.assert_qmp(result, 'return', {})
+
self.wait_until_completed(drive='commit-node3')
# Similar to test_overlapping_2, but here block-commit doesn't use the
'top' parameter.
@@ -309,6 +319,9 @@ class TestParallelOps(iotests.QMPTestCase):
self.assert_qmp(event, 'data/type', 'commit')
self.assert_qmp_absent(event, 'data/error')
+ result = self.vm.qmp('block-job-set-speed', device='commit-drive0',
speed=0)
+ self.assert_qmp(result, 'return', {})
+
result = self.vm.qmp('block-job-complete', device='commit-drive0')
self.assert_qmp(result, 'return', {})
@@ -321,13 +334,18 @@ class TestParallelOps(iotests.QMPTestCase):
self.assert_no_active_block_jobs()
# Commit from node2 into node0
- result = self.vm.qmp('block-commit', device='drive0',
top=self.imgs[2], base=self.imgs[0])
+ result = self.vm.qmp('block-commit', device='drive0',
+ top=self.imgs[2], base=self.imgs[0],
+ speed=1024*1024)
self.assert_qmp(result, 'return', {})
# Stream from node2 into node4
result = self.vm.qmp('block-stream', device='node4',
base_node='node2', job_id='node4')
self.assert_qmp(result, 'error/class', 'GenericError')
+ result = self.vm.qmp('block-job-set-speed', device='drive0', speed=0)
+ self.assert_qmp(result, 'return', {})
+
self.wait_until_completed()
self.assert_no_active_block_jobs()
@@ -378,6 +396,10 @@ class TestParallelOps(iotests.QMPTestCase):
result = self.vm.qmp('block-commit', device='drive0',
base=self.imgs[5], speed=1024*1024)
self.assert_qmp(result, 'return', {})
+ for job in ['drive0', 'node4']:
+ result = self.vm.qmp('block-job-set-speed', device=job, speed=0)
+ self.assert_qmp(result, 'return', {})
+
# Wait for all jobs to be finished.
pending_jobs = ['node4', 'drive0']
while len(pending_jobs) > 0:
--
2.21.0
- [Qemu-block] [PULL 00/11] Block patches for rc1, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 01/11] nvme: Set number of queues later in nvme_init(), Max Reitz, 2019/07/15
- [Qemu-block] [PULL 02/11] block: Add BDS.never_freeze, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 03/11] block/stream: Fix error path, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 04/11] block/stream: Swap backing file change order, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 05/11] block: Deep-clear inherits_from, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 06/11] iotests: Fix throttling in 030,
Max Reitz <=
- [Qemu-block] [PULL 07/11] iotests: Compare error messages in 030, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 08/11] iotests: Add @use_log to VM.run_job(), Max Reitz, 2019/07/15
- [Qemu-block] [PULL 09/11] iotests: Add new case to 030, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 10/11] iotests: Add read-only test case to 030, Max Reitz, 2019/07/15
- [Qemu-block] [PULL 11/11] gluster: fix .bdrv_reopen_prepare when backing file is a JSON object, Max Reitz, 2019/07/15
- Re: [Qemu-block] [PULL 00/11] Block patches for rc1, Peter Maydell, 2019/07/15