[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v2 02/13] qcrypto-luks: rename some fields in QCryptoBlockLUKSHea
|
From: |
Maxim Levitsky |
|
Subject: |
[PATCH v2 02/13] qcrypto-luks: rename some fields in QCryptoBlockLUKSHeader |
|
Date: |
Thu, 26 Sep 2019 00:35:16 +0300 |
* key_bytes -> master_key_len
* payload_offset = payload_offset_sector (to emphasise that this isn't byte
offset)
* key_offset -> key_offset_sector - same as above for luks slots
Signed-off-by: Maxim Levitsky <address@hidden>
Reviewed-by: Daniel P. Berrangé <address@hidden>
---
crypto/block-luks.c | 91 +++++++++++++++++++++++----------------------
1 file changed, 47 insertions(+), 44 deletions(-)
diff --git a/crypto/block-luks.c b/crypto/block-luks.c
index 743949adbf..f12fa2d270 100644
--- a/crypto/block-luks.c
+++ b/crypto/block-luks.c
@@ -143,7 +143,7 @@ struct QCryptoBlockLUKSKeySlot {
/* salt for PBKDF2 */
uint8_t salt[QCRYPTO_BLOCK_LUKS_SALT_LEN];
/* start sector of key material */
- uint32_t key_offset;
+ uint32_t key_offset_sector;
/* number of anti-forensic stripes */
uint32_t stripes;
};
@@ -172,10 +172,10 @@ struct QCryptoBlockLUKSHeader {
char hash_spec[QCRYPTO_BLOCK_LUKS_HASH_SPEC_LEN];
/* start offset of the volume data (in 512 byte sectors) */
- uint32_t payload_offset;
+ uint32_t payload_offset_sector;
/* Number of key bytes */
- uint32_t key_bytes;
+ uint32_t master_key_len;
/* master key checksum after PBKDF2 */
uint8_t master_key_digest[QCRYPTO_BLOCK_LUKS_DIGEST_LEN];
@@ -466,7 +466,7 @@ qcrypto_block_luks_load_key(QCryptoBlock *block,
* then encrypted.
*/
rv = readfunc(block,
- slot->key_offset * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE,
+ slot->key_offset_sector * QCRYPTO_BLOCK_LUKS_SECTOR_SIZE,
splitkey, splitkeylen,
opaque,
errp);
@@ -584,8 +584,8 @@ qcrypto_block_luks_find_key(QCryptoBlock *block,
size_t i;
int rv;
- *masterkey = g_new0(uint8_t, luks->header.key_bytes);
- *masterkeylen = luks->header.key_bytes;
+ *masterkey = g_new0(uint8_t, luks->header.master_key_len);
+ *masterkeylen = luks->header.master_key_len;
for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
rv = qcrypto_block_luks_load_key(block,
@@ -677,14 +677,14 @@ qcrypto_block_luks_open(QCryptoBlock *block,
/* The header is always stored in big-endian format, so
* convert everything to native */
be16_to_cpus(&luks->header.version);
- be32_to_cpus(&luks->header.payload_offset);
- be32_to_cpus(&luks->header.key_bytes);
+ be32_to_cpus(&luks->header.payload_offset_sector);
+ be32_to_cpus(&luks->header.master_key_len);
be32_to_cpus(&luks->header.master_key_iterations);
for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
be32_to_cpus(&luks->header.key_slots[i].active);
be32_to_cpus(&luks->header.key_slots[i].iterations);
- be32_to_cpus(&luks->header.key_slots[i].key_offset);
+ be32_to_cpus(&luks->header.key_slots[i].key_offset_sector);
be32_to_cpus(&luks->header.key_slots[i].stripes);
}
@@ -743,10 +743,11 @@ qcrypto_block_luks_open(QCryptoBlock *block,
goto fail;
}
- cipheralg = qcrypto_block_luks_cipher_name_lookup(luks->header.cipher_name,
- ciphermode,
- luks->header.key_bytes,
- &local_err);
+ cipheralg =
+ qcrypto_block_luks_cipher_name_lookup(luks->header.cipher_name,
+ ciphermode,
+ luks->header.master_key_len,
+ &local_err);
if (local_err) {
ret = -ENOTSUP;
error_propagate(errp, local_err);
@@ -838,7 +839,7 @@ qcrypto_block_luks_open(QCryptoBlock *block,
}
block->sector_size = QCRYPTO_BLOCK_LUKS_SECTOR_SIZE;
- block->payload_offset = luks->header.payload_offset *
+ block->payload_offset = luks->header.payload_offset_sector *
block->sector_size;
luks->cipher_alg = cipheralg;
@@ -993,9 +994,11 @@ qcrypto_block_luks_create(QCryptoBlock *block,
strcpy(luks->header.cipher_mode, cipher_mode_spec);
strcpy(luks->header.hash_spec, hash_alg);
- luks->header.key_bytes = qcrypto_cipher_get_key_len(luks_opts.cipher_alg);
+ luks->header.master_key_len =
+ qcrypto_cipher_get_key_len(luks_opts.cipher_alg);
+
if (luks_opts.cipher_mode == QCRYPTO_CIPHER_MODE_XTS) {
- luks->header.key_bytes *= 2;
+ luks->header.master_key_len *= 2;
}
/* Generate the salt used for hashing the master key
@@ -1008,9 +1011,9 @@ qcrypto_block_luks_create(QCryptoBlock *block,
}
/* Generate random master key */
- masterkey = g_new0(uint8_t, luks->header.key_bytes);
+ masterkey = g_new0(uint8_t, luks->header.master_key_len);
if (qcrypto_random_bytes(masterkey,
- luks->header.key_bytes, errp) < 0) {
+ luks->header.master_key_len, errp) < 0) {
goto error;
}
@@ -1018,7 +1021,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Setup the block device payload encryption objects */
if (qcrypto_block_init_cipher(block, luks_opts.cipher_alg,
luks_opts.cipher_mode, masterkey,
- luks->header.key_bytes, 1, errp) < 0) {
+ luks->header.master_key_len, 1, errp) < 0) {
goto error;
}
@@ -1028,7 +1031,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
block->ivgen = qcrypto_ivgen_new(luks_opts.ivgen_alg,
ivcipheralg,
luks_opts.ivgen_hash_alg,
- masterkey, luks->header.key_bytes,
+ masterkey, luks->header.master_key_len,
errp);
if (!block->ivgen) {
@@ -1040,7 +1043,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
* key, in order to have 1 second of compute time used
*/
iters = qcrypto_pbkdf2_count_iters(luks_opts.hash_alg,
- masterkey, luks->header.key_bytes,
+ masterkey, luks->header.master_key_len,
luks->header.master_key_salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
QCRYPTO_BLOCK_LUKS_DIGEST_LEN,
@@ -1080,7 +1083,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
* valid master key
*/
if (qcrypto_pbkdf2(luks_opts.hash_alg,
- masterkey, luks->header.key_bytes,
+ masterkey, luks->header.master_key_len,
luks->header.master_key_salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
luks->header.master_key_iterations,
@@ -1093,7 +1096,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Although LUKS has multiple key slots, we're just going
* to use the first key slot */
- splitkeylen = luks->header.key_bytes * QCRYPTO_BLOCK_LUKS_STRIPES;
+ splitkeylen = luks->header.master_key_len * QCRYPTO_BLOCK_LUKS_STRIPES;
for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
luks->header.key_slots[i].active = i == 0 ?
QCRYPTO_BLOCK_LUKS_KEY_SLOT_ENABLED :
@@ -1103,7 +1106,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* This calculation doesn't match that shown in the spec,
* but instead follows the cryptsetup implementation.
*/
- luks->header.key_slots[i].key_offset =
+ luks->header.key_slots[i].key_offset_sector =
(QCRYPTO_BLOCK_LUKS_KEY_SLOT_OFFSET /
QCRYPTO_BLOCK_LUKS_SECTOR_SIZE) +
(ROUND_UP(DIV_ROUND_UP(splitkeylen,
QCRYPTO_BLOCK_LUKS_SECTOR_SIZE),
@@ -1124,7 +1127,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
(uint8_t *)password, strlen(password),
luks->header.key_slots[0].salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
- luks->header.key_bytes,
+ luks->header.master_key_len,
&local_err);
if (local_err) {
error_propagate(errp, local_err);
@@ -1155,13 +1158,13 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Generate a key that we'll use to encrypt the master
* key, from the user's password
*/
- slotkey = g_new0(uint8_t, luks->header.key_bytes);
+ slotkey = g_new0(uint8_t, luks->header.master_key_len);
if (qcrypto_pbkdf2(luks_opts.hash_alg,
(uint8_t *)password, strlen(password),
luks->header.key_slots[0].salt,
QCRYPTO_BLOCK_LUKS_SALT_LEN,
luks->header.key_slots[0].iterations,
- slotkey, luks->header.key_bytes,
+ slotkey, luks->header.master_key_len,
errp) < 0) {
goto error;
}
@@ -1172,7 +1175,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
*/
cipher = qcrypto_cipher_new(luks_opts.cipher_alg,
luks_opts.cipher_mode,
- slotkey, luks->header.key_bytes,
+ slotkey, luks->header.master_key_len,
errp);
if (!cipher) {
goto error;
@@ -1181,7 +1184,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
ivgen = qcrypto_ivgen_new(luks_opts.ivgen_alg,
ivcipheralg,
luks_opts.ivgen_hash_alg,
- slotkey, luks->header.key_bytes,
+ slotkey, luks->header.master_key_len,
errp);
if (!ivgen) {
goto error;
@@ -1193,7 +1196,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
splitkey = g_new0(uint8_t, splitkeylen);
if (qcrypto_afsplit_encode(luks_opts.hash_alg,
- luks->header.key_bytes,
+ luks->header.master_key_len,
luks->header.key_slots[0].stripes,
masterkey,
splitkey,
@@ -1217,7 +1220,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
* slot headers, rounded up to the nearest sector, combined with
* the size of each master key material region, also rounded up
* to the nearest sector */
- luks->header.payload_offset =
+ luks->header.payload_offset_sector =
(QCRYPTO_BLOCK_LUKS_KEY_SLOT_OFFSET /
QCRYPTO_BLOCK_LUKS_SECTOR_SIZE) +
(ROUND_UP(DIV_ROUND_UP(splitkeylen, QCRYPTO_BLOCK_LUKS_SECTOR_SIZE),
@@ -1226,7 +1229,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS);
block->sector_size = QCRYPTO_BLOCK_LUKS_SECTOR_SIZE;
- block->payload_offset = luks->header.payload_offset *
+ block->payload_offset = luks->header.payload_offset_sector *
block->sector_size;
/* Reserve header space to match payload offset */
@@ -1239,14 +1242,14 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Everything on disk uses Big Endian, so flip header fields
* before writing them */
cpu_to_be16s(&luks->header.version);
- cpu_to_be32s(&luks->header.payload_offset);
- cpu_to_be32s(&luks->header.key_bytes);
+ cpu_to_be32s(&luks->header.payload_offset_sector);
+ cpu_to_be32s(&luks->header.master_key_len);
cpu_to_be32s(&luks->header.master_key_iterations);
for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
cpu_to_be32s(&luks->header.key_slots[i].active);
cpu_to_be32s(&luks->header.key_slots[i].iterations);
- cpu_to_be32s(&luks->header.key_slots[i].key_offset);
+ cpu_to_be32s(&luks->header.key_slots[i].key_offset_sector);
cpu_to_be32s(&luks->header.key_slots[i].stripes);
}
@@ -1263,14 +1266,14 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Byte swap the header back to native, in case we need
* to read it again later */
be16_to_cpus(&luks->header.version);
- be32_to_cpus(&luks->header.payload_offset);
- be32_to_cpus(&luks->header.key_bytes);
+ be32_to_cpus(&luks->header.payload_offset_sector);
+ be32_to_cpus(&luks->header.master_key_len);
be32_to_cpus(&luks->header.master_key_iterations);
for (i = 0; i < QCRYPTO_BLOCK_LUKS_NUM_KEY_SLOTS; i++) {
be32_to_cpus(&luks->header.key_slots[i].active);
be32_to_cpus(&luks->header.key_slots[i].iterations);
- be32_to_cpus(&luks->header.key_slots[i].key_offset);
+ be32_to_cpus(&luks->header.key_slots[i].key_offset_sector);
be32_to_cpus(&luks->header.key_slots[i].stripes);
}
@@ -1282,7 +1285,7 @@ qcrypto_block_luks_create(QCryptoBlock *block,
/* Write out the master key material, starting at the
* sector immediately following the partition header. */
if (writefunc(block,
- luks->header.key_slots[0].key_offset *
+ luks->header.key_slots[0].key_offset_sector *
QCRYPTO_BLOCK_LUKS_SECTOR_SIZE,
splitkey, splitkeylen,
opaque,
@@ -1296,17 +1299,17 @@ qcrypto_block_luks_create(QCryptoBlock *block,
luks->ivgen_hash_alg = luks_opts.ivgen_hash_alg;
luks->hash_alg = luks_opts.hash_alg;
- memset(masterkey, 0, luks->header.key_bytes);
- memset(slotkey, 0, luks->header.key_bytes);
+ memset(masterkey, 0, luks->header.master_key_len);
+ memset(slotkey, 0, luks->header.master_key_len);
return 0;
error:
if (masterkey) {
- memset(masterkey, 0, luks->header.key_bytes);
+ memset(masterkey, 0, luks->header.master_key_len);
}
if (slotkey) {
- memset(slotkey, 0, luks->header.key_bytes);
+ memset(slotkey, 0, luks->header.master_key_len);
}
qcrypto_block_free_cipher(block);
@@ -1346,7 +1349,7 @@ static int qcrypto_block_luks_get_info(QCryptoBlock
*block,
slots->value = slot = g_new0(QCryptoBlockInfoLUKSSlot, 1);
slot->active = luks->header.key_slots[i].active ==
QCRYPTO_BLOCK_LUKS_KEY_SLOT_ENABLED;
- slot->key_offset = luks->header.key_slots[i].key_offset
+ slot->key_offset = luks->header.key_slots[i].key_offset_sector
* QCRYPTO_BLOCK_LUKS_SECTOR_SIZE;
if (slot->active) {
slot->has_iters = true;
--
2.17.2
- [PATCH v2 00/13] crypto/luks: preparation for encryption key managment, Maxim Levitsky, 2019/09/25
- [PATCH v2 01/13] block-crypto: misc refactoring, Maxim Levitsky, 2019/09/25
- [PATCH v2 02/13] qcrypto-luks: rename some fields in QCryptoBlockLUKSHeader,
Maxim Levitsky <=
- [PATCH v2 03/13] qcrypto-luks: don't overwrite cipher_mode in header, Maxim Levitsky, 2019/09/25
- [PATCH v2 04/13] qcrypto-luks: simplify masterkey and masterkey length, Maxim Levitsky, 2019/09/25
- [PATCH v2 05/13] qcrypto-luks: pass keyslot index rather that pointer to the keyslot, Maxim Levitsky, 2019/09/25
- [PATCH v2 06/13] qcrypto-luks: use the parsed encryption settings in QCryptoBlockLUKS, Maxim Levitsky, 2019/09/25
- [PATCH v2 07/13] qcrypto-luks: purge unused error codes from open callback, Maxim Levitsky, 2019/09/25
- [PATCH v2 08/13] qcrypto-luks: extract store and load header, Maxim Levitsky, 2019/09/25
- [PATCH v2 09/13] qcrypto-luks: extract check and parse header, Maxim Levitsky, 2019/09/25
- [PATCH v2 13/13] LUKS: better error message when creating too large files, Maxim Levitsky, 2019/09/25
- [PATCH v2 12/13] qcrypto-luks: more rigorous header checking, Maxim Levitsky, 2019/09/25
- [PATCH v2 10/13] qcrypto-luks: extract store key function, Maxim Levitsky, 2019/09/25