[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[PATCH v4 10/32] block/nbd: simplify waking of nbd_co_establish_connecti
From: |
Vladimir Sementsov-Ogievskiy |
Subject: |
[PATCH v4 10/32] block/nbd: simplify waking of nbd_co_establish_connection() |
Date: |
Thu, 10 Jun 2021 13:07:40 +0300 |
Instead of managing connect_bh, bh_ctx, and wait_connect fields, we
can use a single link to the waiting coroutine with proper mutex
protection.
So new logic is:
nbd_co_establish_connection() sets wait_co under the mutex, releases
the mutex, then yield()s. Note that wait_co may be scheduled by the
thread immediately after unlocking the mutex. Still, the main thread
(or iothread) will not reach the code for entering the coroutine until
the yield(), so we are safe.
connect_thread_func() and nbd_co_establish_connection_cancel() do
the following to handle wait_co:
Under the mutex, if thr->wait_co is not NULL, make it NULL and
schedule it. This way, we avoid scheduling the coroutine twice.
Still scheduling is a bit different:
In connect_thread_func() we can just call aio_co_wake under mutex,
after commit
[async: the main AioContext is only "current" if under the BQL]
we are sure that aio_co_wake() will not try to acquire the aio context
and do qemu_aio_coroutine_enter() but simply schedule the coroutine by
aio_co_schedule().
nbd_co_establish_connection_cancel() will be called from non-coroutine
context in further patch and will be able to go through
qemu_aio_coroutine_enter() path of aio_co_wake(). So keep current
behavior of waking the coroutine after the critical section.
Also, this commit reduces the dependence of
nbd_co_establish_connection() on the internals of bs (we now use a
generic pointer to the coroutine, instead of direct use of
s->connection_co). This is a step towards splitting the connection
API out of nbd.c.
Signed-off-by: Vladimir Sementsov-Ogievskiy <vsementsov@virtuozzo.com>
---
block/nbd.c | 55 +++++++++++++++--------------------------------------
1 file changed, 15 insertions(+), 40 deletions(-)
diff --git a/block/nbd.c b/block/nbd.c
index fdfb1ff7a1..653af62940 100644
--- a/block/nbd.c
+++ b/block/nbd.c
@@ -87,12 +87,6 @@ typedef enum NBDConnectThreadState {
typedef struct NBDConnectThread {
/* Initialization constants */
SocketAddress *saddr; /* address to connect to */
- /*
- * Bottom half to schedule on completion. Scheduled only if bh_ctx is not
- * NULL
- */
- QEMUBHFunc *bh_func;
- void *bh_opaque;
/*
* Result of last attempt. Valid in FAIL and SUCCESS states.
@@ -101,10 +95,15 @@ typedef struct NBDConnectThread {
QIOChannelSocket *sioc;
Error *err;
- /* state and bh_ctx are protected by mutex */
QemuMutex mutex;
+ /* All further fields are protected by mutex */
NBDConnectThreadState state; /* current state of the thread */
- AioContext *bh_ctx; /* where to schedule bh (NULL means don't schedule) */
+
+ /*
+ * wait_co: if non-NULL, which coroutine to wake in
+ * nbd_co_establish_connection() after yield()
+ */
+ Coroutine *wait_co;
} NBDConnectThread;
typedef struct BDRVNBDState {
@@ -138,7 +137,6 @@ typedef struct BDRVNBDState {
char *x_dirty_bitmap;
bool alloc_depth;
- bool wait_connect;
NBDConnectThread *connect_thread;
} BDRVNBDState;
@@ -370,15 +368,6 @@ static bool nbd_client_connecting_wait(BDRVNBDState *s)
return qatomic_load_acquire(&s->state) == NBD_CLIENT_CONNECTING_WAIT;
}
-static void connect_bh(void *opaque)
-{
- BDRVNBDState *state = opaque;
-
- assert(state->wait_connect);
- state->wait_connect = false;
- aio_co_wake(state->connection_co);
-}
-
static void nbd_init_connect_thread(BDRVNBDState *s)
{
s->connect_thread = g_new(NBDConnectThread, 1);
@@ -386,8 +375,6 @@ static void nbd_init_connect_thread(BDRVNBDState *s)
*s->connect_thread = (NBDConnectThread) {
.saddr = QAPI_CLONE(SocketAddress, s->saddr),
.state = CONNECT_THREAD_NONE,
- .bh_func = connect_bh,
- .bh_opaque = s,
};
qemu_mutex_init(&s->connect_thread->mutex);
@@ -427,11 +414,9 @@ static void *connect_thread_func(void *opaque)
switch (thr->state) {
case CONNECT_THREAD_RUNNING:
thr->state = ret < 0 ? CONNECT_THREAD_FAIL : CONNECT_THREAD_SUCCESS;
- if (thr->bh_ctx) {
- aio_bh_schedule_oneshot(thr->bh_ctx, thr->bh_func, thr->bh_opaque);
-
- /* play safe, don't reuse bh_ctx on further connection attempts */
- thr->bh_ctx = NULL;
+ if (thr->wait_co) {
+ aio_co_wake(thr->wait_co);
+ thr->wait_co = NULL;
}
break;
case CONNECT_THREAD_RUNNING_DETACHED:
@@ -485,20 +470,14 @@ nbd_co_establish_connection(BlockDriverState *bs, Error
**errp)
abort();
}
- thr->bh_ctx = qemu_get_current_aio_context();
+ thr->wait_co = qemu_coroutine_self();
qemu_mutex_unlock(&thr->mutex);
-
/*
* We are going to wait for connect-thread finish, but
* nbd_client_co_drain_begin() can interrupt.
- *
- * Note that wait_connect variable is not visible for connect-thread. It
- * doesn't need mutex protection, it used only inside home aio context of
- * bs.
*/
- s->wait_connect = true;
qemu_coroutine_yield();
qemu_mutex_lock(&thr->mutex);
@@ -553,23 +532,19 @@ static void
nbd_co_establish_connection_cancel(BlockDriverState *bs)
{
BDRVNBDState *s = bs->opaque;
NBDConnectThread *thr = s->connect_thread;
- bool wake = false;
+ Coroutine *wait_co = NULL;
qemu_mutex_lock(&thr->mutex);
if (thr->state == CONNECT_THREAD_RUNNING) {
/* We can cancel only in running state, when bh is not yet scheduled */
- thr->bh_ctx = NULL;
- if (s->wait_connect) {
- s->wait_connect = false;
- wake = true;
- }
+ wait_co = g_steal_pointer(&thr->wait_co);
}
qemu_mutex_unlock(&thr->mutex);
- if (wake) {
- aio_co_wake(s->connection_co);
+ if (wait_co) {
+ aio_co_wake(wait_co);
}
}
--
2.29.2
- Re: [PATCH v4 01/32] co-queue: drop extra coroutine_fn marks, (continued)
- [PATCH v4 02/32] block/nbd: fix channel object leak, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 06/32] block/nbd: call socket_address_parse_named_fd() in advance, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 07/32] block/nbd: ensure ->connection_thread is always valid, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 03/32] block/nbd: fix how state is cleared on nbd_open() failure paths, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 08/32] block/nbd: nbd_client_handshake(): fix leak of s->ioc, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 09/32] block/nbd: BDRVNBDState: drop unused connect_err and connect_status, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 04/32] block/nbd: connect_thread_func(): do qio_channel_set_delay(false), Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 10/32] block/nbd: simplify waking of nbd_co_establish_connection(),
Vladimir Sementsov-Ogievskiy <=
- [PATCH v4 11/32] block/nbd: drop thr->state, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 17/32] nbd: move connection code from block/nbd to nbd/client-connection, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 18/32] nbd/client-connection: use QEMU_LOCK_GUARD, Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 05/32] qemu-sockets: introduce socket_address_parse_named_fd(), Vladimir Sementsov-Ogievskiy, 2021/06/10
- [PATCH v4 15/32] block/nbd: introduce nbd_client_connection_new(), Vladimir Sementsov-Ogievskiy, 2021/06/10