[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [PULL 18/28] file-posix: try BLKSECTGET on block devices too, do not
From: |
Halil Pasic |
Subject: |
Re: [PULL 18/28] file-posix: try BLKSECTGET on block devices too, do not round to power of 2 |
Date: |
Wed, 22 Sep 2021 21:51:43 +0200 |
On Mon, 6 Sep 2021 16:24:20 +0200
Halil Pasic <pasic@linux.ibm.com> wrote:
> On Fri, 25 Jun 2021 16:18:12 +0200
> Paolo Bonzini <pbonzini@redhat.com> wrote:
>
> > bs->sg is only true for character devices, but block devices can also
> > be used with scsi-block and scsi-generic. Unfortunately BLKSECTGET
> > returns bytes in an int for /dev/sgN devices, and sectors in a short
> > for block devices, so account for that in the code.
> >
> > The maximum transfer also need not be a power of 2 (for example I have
> > seen disks with 1280 KiB maximum transfer) so there's no need to pass
> > the result through pow2floor.
> >
> > Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
>
> We have found that this patch leads to in guest I/O errors when DASD
> is used as a source device. I.e. libvirt domain xml wise something like:
>
> <disk type='block' device='disk'>
> <driver name='qemu' type='raw' cache='none' io='native' iothread='1'/>
> <source dev='/dev/disk/by-id/ccw-XXXXXXX'/>
> <backingStore/>
> <target dev='vdb' bus='virtio'/>
> <address type='ccw' cssid='0xfe' ssid='0x0' devno='0x0008'/>
> </disk>
>
> I don't think it is the fault of this patch: it LGTM. But it correlates
> 100%, furthermore the problem seems to be related to the value of
> bl.max_iov which now comes from sysfs.
>
> We are still investigating what is actually wrong. Just wanted to give
> everybody a heads-up that this does seem to cause a nasty regression on
> s390x, even if the code itself is perfect.
>
We have figured out what is going on here. The problem seems to be
specific to linux aio, which seems to limit the size of the iovec to
1024 (UIO_MAXIOV).
Because of this requests get rejected with -EINVAL by the io_submit()
syscall. Here comes a real world example:
(gdb) p *laiocb
$5 = {co = 0x3ff700072c0, ctx = 0x3fe60002650, iocb = {data = 0x0, aio_rw_flags
= 0, key = 0,
aio_lio_opcode = 8, aio_reqprio = 0, aio_fildes = 38, u = {c = {buf =
0x3ff70055bc0,
nbytes = 1274, offset = 19977953280, __pad3 = 0, flags = 1, resfd =
43}, v = {
vec = 0x3ff70055bc0, nr = 0, offset = 19977953280}, poll = {__pad1 =
1023,
events = 1879399360}, saddr = {addr = 0x3ff70055bc0, len = 0}}}, ret =
-22,
nbytes = 20586496, qiov = 0x3ff700382f8, is_read = false, next = {sqe_next =
0x0}}
On the host kernel side, the -EINVAL comes from this line:
https://elixir.bootlin.com/linux/v5.15-rc2/source/lib/iov_iter.c#L1863
in iovec_from_user() roughly via: __do_sys_io_submit()->
io_submit_one() -> aio_write() -> aio_setup_rw() -> __import_iovec().
Based on the offline discussion with the DASD maintainers, and on the
linux in source tree documentation (Documentation/block/queue-sysfs.rst
und Documentation/block/biodoc.rst), I believe that the DASD driver is
not wrong when advertising the value 65535 for queue/max_segments.
I believe QEMU jumps to the wrong conclusion in blk_get_max_iov() or
in virtio_blk_submit_multireq(), I can't really tell because I'm not
sure what the semantic of blk_get_max_iov() is. But if, I had to, I would
bet that blk_get_max_iov() returns the wrong value, when linux aio is
used. I'm not sure what is the exact relationship between max_segments
and max_iov.
One idea on how to fix this would be, to cap max_iov to UIO_MAXIOV
(unconditionally, or when linux aio is used). But I have to admit, I
don't have clarity. I couldn't even find documentation that states
this limitation of linux aio (I didn't look for it too hard though), so
I can not even be sure this is a QEMU problem.
That is why I decided to write this up first, and start a discussion on
who is playing foul with the most relevant people posted. I intend to try
myself fixing the problem once my understanding of it reaches a
sufficient level.
Thanks in advance for your contribution!
Regards,
Halil
- Re: [PULL 18/28] file-posix: try BLKSECTGET on block devices too, do not round to power of 2,
Halil Pasic <=