qemu-block
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[PATCH 3/3] tests/qtest: add some tests for virtio-net failover


From: Laurent Vivier
Subject: [PATCH 3/3] tests/qtest: add some tests for virtio-net failover
Date: Wed, 10 Nov 2021 14:56:16 +0100

Add test cases to test several error cases that must be
generated by invalid failover configuration.

Add a combination of coldplug and hotplug test cases to be
sure the primary is correctly managed according the
presence or not of the STANDBY feature.

Signed-off-by: Laurent Vivier <lvivier@redhat.com>
---
 tests/qtest/meson.build           |   3 +
 tests/qtest/virtio-net-failover.c | 567 ++++++++++++++++++++++++++++++
 2 files changed, 570 insertions(+)
 create mode 100644 tests/qtest/virtio-net-failover.c

diff --git a/tests/qtest/meson.build b/tests/qtest/meson.build
index c9d8458062ff..6d66bf522156 100644
--- a/tests/qtest/meson.build
+++ b/tests/qtest/meson.build
@@ -22,6 +22,9 @@ qtests_generic = \
   (config_all_devices.has_key('CONFIG_VIRTIO_SCSI') ? 
['fuzz-virtio-scsi-test'] : []) + \
   (config_all_devices.has_key('CONFIG_SB16') ? ['fuzz-sb16-test'] : []) + \
   (config_all_devices.has_key('CONFIG_SDHCI_PCI') ? ['fuzz-sdcard-test'] : []) 
+ \
+  (config_all_devices.has_key('CONFIG_VIRTIO_NET') and \
+   config_all_devices.has_key('CONFIG_Q35') and \
+   config_all_devices.has_key('CONFIG_VIRTIO_PCI') ? ['virtio-net-failover'] : 
[]) + \
   [
   'cdrom-test',
   'device-introspect-test',
diff --git a/tests/qtest/virtio-net-failover.c 
b/tests/qtest/virtio-net-failover.c
new file mode 100644
index 000000000000..c7b03b887179
--- /dev/null
+++ b/tests/qtest/virtio-net-failover.c
@@ -0,0 +1,567 @@
+#include "qemu/osdep.h"
+#include "libqos/libqtest.h"
+#include "libqos/pci.h"
+#include "libqos/pci-pc.h"
+#include "qapi/qmp/qdict.h"
+#include "qapi/qmp/qlist.h"
+#include "qapi/qmp/qjson.h"
+#include "libqos/malloc-pc.h"
+#include "libqos/virtio-pci.h"
+#include "hw/pci/pci.h"
+
+#define BASE_MACHINE "-M q35 -nodefaults " \
+    "-device pcie-root-port,id=root0,addr=0x1,bus=pcie.0,chassis=1 " \
+    "-device pcie-root-port,id=root1,addr=0x2,bus=pcie.0,chassis=2 "
+
+#define MAC_PRIMARY "52:54:00:11:11:11"
+#define MAC_STANDBY "52:54:00:22:22:22"
+
+static QGuestAllocator guest_malloc;
+static QPCIBus *pcibus;
+
+static QTestState *machine_start(const char *args)
+{
+    QTestState *qts;
+    QPCIDevice *dev;
+
+    qts = qtest_init(args);
+
+    pc_alloc_init(&guest_malloc, qts, 0);
+    pcibus = qpci_new_pc(qts, &guest_malloc);
+    g_assert(qpci_secondary_buses_init(pcibus) == 2);
+
+    dev = qpci_device_find(pcibus, QPCI_DEVFN(1, 0)); /* root0 */
+    g_assert_nonnull(dev);
+
+    qpci_device_enable(dev);
+    qpci_iomap(dev, 4, NULL);
+
+    g_free(dev);
+
+    dev = qpci_device_find(pcibus, QPCI_DEVFN(2, 0)); /* root1 */
+    g_assert_nonnull(dev);
+
+    qpci_device_enable(dev);
+    qpci_iomap(dev, 4, NULL);
+
+    g_free(dev);
+
+    return qts;
+}
+
+static void machine_stop(QTestState *qts)
+{
+    qpci_free_pc(pcibus);
+    alloc_destroy(&guest_malloc);
+    qtest_quit(qts);
+}
+
+static void test_error_id(void)
+{
+    QTestState *qts;
+    QDict *resp;
+    QDict *err;
+
+    qts = machine_start(BASE_MACHINE
+                        "-device 
virtio-net,bus=root0,id=standby0,failover=on");
+
+    resp = qtest_qmp(qts, "{'execute': 'device_add',"
+                          "'arguments': {"
+                          "'driver': 'virtio-net',"
+                          "'bus': 'root1',"
+                          "'failover_pair_id': 'standby0'"
+                          "} }");
+    g_assert(qdict_haskey(resp, "error"));
+
+    err = qdict_get_qdict(resp, "error");
+    g_assert(qdict_haskey(err, "desc"));
+
+    g_assert_cmpstr(qdict_get_str(err, "desc"), ==,
+                    "Device with failover_pair_id needs to have id");
+
+    qobject_unref(resp);
+
+    machine_stop(qts);
+}
+
+static void test_error_pcie(void)
+{
+    QTestState *qts;
+    QDict *resp;
+    QDict *err;
+
+    qts = machine_start(BASE_MACHINE
+                        "-device 
virtio-net,bus=root0,id=standby0,failover=on");
+
+    resp = qtest_qmp(qts, "{'execute': 'device_add',"
+                          "'arguments': {"
+                          "'driver': 'virtio-net',"
+                          "'id': 'primary0',"
+                          "'bus': 'pcie.0',"
+                          "'failover_pair_id': 'standby0'"
+                          "} }");
+    g_assert(qdict_haskey(resp, "error"));
+
+    err = qdict_get_qdict(resp, "error");
+    g_assert(qdict_haskey(err, "desc"));
+
+    g_assert_cmpstr(qdict_get_str(err, "desc"), ==,
+                    "Bus 'pcie.0' does not support hotplugging");
+
+    qobject_unref(resp);
+
+    machine_stop(qts);
+}
+
+static QDict *find_device(QDict *bus, const char *name)
+{
+    const QObject *obj;
+    QList *devices;
+    QList *list;
+
+    devices = qdict_get_qlist(bus, "devices");
+    if (devices == NULL) {
+        return NULL;
+    }
+
+    list = qlist_copy(devices);
+    while ((obj = qlist_pop(list))) {
+        QDict *device;
+
+        device = qobject_to(QDict, obj);
+
+        if (qdict_haskey(device, "pci_bridge")) {
+            QDict *bridge;
+            QDict *bridge_device;
+
+            bridge = qdict_get_qdict(device, "pci_bridge");
+
+            if (qdict_haskey(bridge, "devices")) {
+                bridge_device = find_device(bridge, name);
+                if (bridge_device) {
+                    qobject_unref(list);
+                    return bridge_device;
+                }
+            }
+        }
+
+        if (!qdict_haskey(device, "qdev_id")) {
+            continue;
+        }
+
+        if (strcmp(qdict_get_str(device, "qdev_id"), name) == 0) {
+            qobject_ref(device);
+            qobject_unref(list);
+            return device;
+        }
+    }
+    qobject_unref(list);
+
+    return NULL;
+}
+
+static QDict *get_bus(QTestState *qts, int num)
+{
+    QObject *obj;
+    QDict *resp;
+    QList *ret;
+
+    resp = qtest_qmp(qts, "{ 'execute': 'query-pci' }");
+    g_assert(qdict_haskey(resp, "return"));
+
+    ret = qdict_get_qlist(resp, "return");
+    g_assert_nonnull(ret);
+
+    while ((obj = qlist_pop(ret))) {
+        QDict *bus;
+
+        bus = qobject_to(QDict, obj);
+        if (!qdict_haskey(bus, "bus")) {
+            continue;
+        }
+        if (qdict_get_int(bus, "bus") == num) {
+            qobject_ref(bus);
+            qobject_unref(resp);
+            return bus;
+        }
+    }
+    qobject_unref(resp);
+
+    return NULL;
+}
+
+static char *get_mac(QTestState *qts, const char *name)
+{
+    QDict *resp;
+    char *mac;
+
+    resp = qtest_qmp(qts, "{ 'execute': 'qom-get', "
+                     "'arguments': { "
+                     "'path': %s, "
+                     "'property': 'mac' } }", name);
+
+    g_assert(qdict_haskey(resp, "return"));
+
+    mac = g_strdup( qdict_get_str(resp, "return"));
+
+    qobject_unref(resp);
+
+    return mac;
+}
+
+static void check_cards(QTestState *qts, bool standby, bool primary)
+{
+    QDict *device;
+    QDict *bus;
+    char *mac;
+
+    bus = get_bus(qts, 0);
+    device = find_device(bus, "standby0");
+    if (standby) {
+        g_assert_nonnull(device);
+        qobject_unref(device);
+
+        mac = get_mac(qts, "/machine/peripheral/standby0");
+        g_assert_cmpstr(mac, ==, MAC_STANDBY);
+        g_free(mac);
+    } else {
+       g_assert_null(device);
+    }
+
+    device = find_device(bus, "primary0");
+    if (primary) {
+        g_assert_nonnull(device);
+        qobject_unref(device);
+
+        mac = get_mac(qts, "/machine/peripheral/primary0");
+        g_assert_cmpstr(mac, ==, MAC_PRIMARY);
+        g_free(mac);
+    } else {
+       g_assert_null(device);
+    }
+    qobject_unref(bus);
+}
+
+static void test_on(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                        "-netdev user,id=hs0 "
+                        "-device virtio-net,bus=root0,id=standby0,"
+                        "failover=on,netdev=hs0,mac="MAC_STANDBY" "
+                        "-device virtio-net,bus=root1,id=primary0,"
+                        
"failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY);
+
+    check_cards(qts, true, false); /* standby, no primary */
+
+    machine_stop(qts);
+}
+
+static void test_on_mismatch(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-device virtio-net,bus=root0,id=standby0,"
+                     "failover=on,netdev=hs0,mac="MAC_STANDBY" "
+                     "-netdev user,id=hs1 "
+                     "-device virtio-net,bus=root1,id=primary0,"
+                     "failover_pair_id=standby1,netdev=hs1,mac="MAC_PRIMARY);
+
+    check_cards(qts, true, true); /* standby, primary (but no failover) */
+
+    machine_stop(qts);
+}
+
+static void test_off(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-device virtio-net,bus=root0,id=standby0,"
+                     "failover=off,netdev=hs0,mac="MAC_STANDBY" "
+                     "-netdev user,id=hs1 "
+                     "-device virtio-net,bus=root1,id=primary0,"
+                     "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY);
+
+    check_cards(qts, true, true); /* standby, primary (but no failover) */
+
+    machine_stop(qts);
+}
+
+static void start_virtio_net(QTestState *qts)
+{
+    QVirtioPCIDevice *dev;
+    uint64_t features;
+    QPCIAddress addr;
+    QDict *resp;
+    QDict *data;
+
+    addr.devfn = QPCI_DEVFN(1 << 5, 0);
+    dev = virtio_pci_new(pcibus, &addr);
+    g_assert_nonnull(dev);
+    qvirtio_pci_device_enable(dev);
+    qvirtio_start_device(&dev->vdev);
+    features = qvirtio_get_features(&dev->vdev);
+    features = features & ~(QVIRTIO_F_BAD_FEATURE |
+                            (1ull << VIRTIO_RING_F_INDIRECT_DESC) |
+                            (1ull << VIRTIO_RING_F_EVENT_IDX));
+    qvirtio_set_features(&dev->vdev, features);
+    qvirtio_set_driver_ok(&dev->vdev);
+
+    resp = qtest_qmp_eventwait_ref(qts, "FAILOVER_NEGOTIATED");
+    g_assert(qdict_haskey(resp, "data"));
+
+    data = qdict_get_qdict(resp, "data");
+    g_assert(qdict_haskey(data, "device-id"));
+    g_assert_cmpstr(qdict_get_str(data, "device-id"), ==, "standby0");
+
+    qobject_unref(resp);
+}
+
+static void test_enabled(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-device virtio-net,bus=root0,id=standby0,"
+                     "failover=on,netdev=hs0,mac="MAC_STANDBY" "
+                     "-netdev user,id=hs1 "
+                     "-device virtio-net,bus=root1,id=primary0,"
+                     "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY" "
+                     );
+
+    check_cards(qts, true, false); /* standby, no primary */
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, true); /* standby, primary with failover */
+
+    machine_stop(qts);
+}
+
+static void test_hotplug_1(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-device virtio-net,bus=root0,id=standby0,"
+                     "failover=on,netdev=hs0,mac="MAC_STANDBY" "
+                     "-netdev user,id=hs1 "
+                     );
+
+    check_cards(qts, true, false); /* no standby, no primary */
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, false);
+
+    qtest_qmp_device_add(qts, "virtio-net", "primary0",
+                         "{'bus': 'root1',"
+                         "'failover_pair_id': 'standby0',"
+                         "'netdev': 'hs1',"
+                         "'mac': '"MAC_PRIMARY"'}");
+
+    check_cards(qts, true, true);
+
+    machine_stop(qts);
+}
+
+static void test_hotplug_1_reverse(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-netdev user,id=hs1 "
+                     "-device virtio-net,bus=root1,id=primary0,"
+                     "failover_pair_id=standby0,netdev=hs1,mac="MAC_PRIMARY" "
+                     );
+
+    check_cards(qts, false, true);
+
+    qtest_qmp_device_add(qts, "virtio-net", "standby0",
+                         "{'bus': 'root0',"
+                         "'failover': 'on',"
+                         "'netdev': 'hs0',"
+                         "'mac': '"MAC_STANDBY"'}");
+
+    check_cards(qts, true, true); /* XXX: sounds like a bug */
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, true);
+
+    machine_stop(qts);
+}
+
+static void test_hotplug_2(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-netdev user,id=hs1 "
+                     );
+
+    check_cards(qts, false, false); /* no standby, no primary */
+
+    qtest_qmp_device_add(qts, "virtio-net", "standby0",
+                         "{'bus': 'root0',"
+                         "'failover': 'on',"
+                         "'netdev': 'hs0',"
+                         "'mac': '"MAC_STANDBY"'}");
+
+    check_cards(qts, true, false);
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, false);
+
+    qtest_qmp_device_add(qts, "virtio-net", "primary0",
+                         "{'bus': 'root1',"
+                         "'failover_pair_id': 'standby0',"
+                         "'netdev': 'hs1',"
+                         "'mac': '"MAC_PRIMARY"'}");
+
+    check_cards(qts, true, true);
+
+    machine_stop(qts);
+}
+
+static void test_hotplug_2_reverse(void)
+{
+    QTestState *qts;
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-netdev user,id=hs1 "
+                     );
+
+    check_cards(qts, false, false); /* no standby, no primary */
+
+    qtest_qmp_device_add(qts, "virtio-net", "primary0",
+                         "{'bus': 'root1',"
+                         "'failover_pair_id': 'standby0',"
+                         "'netdev': 'hs1',"
+                         "'mac': '"MAC_PRIMARY"'}");
+
+    check_cards(qts, false, true);
+
+    qtest_qmp_device_add(qts, "virtio-net", "standby0",
+                         "{'bus': 'root0',"
+                         "'failover': 'on',"
+                         "'netdev': 'hs0',"
+                         "'mac': '"MAC_STANDBY"'}");
+
+    check_cards(qts, true, true); /* XXX: sounds like a bug */
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, true);
+
+    machine_stop(qts);
+}
+
+static void test_migrate(void)
+{
+    QTestState *qts;
+    QDict *resp, *args, *data;
+    g_autofree gchar *tmpfile = g_strdup_printf(
+                                            "/tmp/failover_test_migrate-%u-%u",
+                                            getpid(), g_test_rand_int());
+    g_autofree gchar *uri = g_strdup_printf("exec: cat > %s", tmpfile);
+
+    qts = machine_start(BASE_MACHINE
+                     "-netdev user,id=hs0 "
+                     "-netdev user,id=hs1 "
+                     );
+
+    check_cards(qts, false, false); /* no standby, no primary */
+
+    qtest_qmp_device_add(qts, "virtio-net", "standby0",
+                         "{'bus': 'root0',"
+                         "'failover': 'on',"
+                         "'netdev': 'hs0',"
+                         "'mac': '"MAC_STANDBY"'}");
+
+    check_cards(qts, true, false);
+
+    start_virtio_net(qts);
+
+    check_cards(qts, true, false);
+
+    qtest_qmp_device_add(qts, "virtio-net", "primary0",
+                         "{'bus': 'root1',"
+                         "'failover_pair_id': 'standby0',"
+                         "'netdev': 'hs1',"
+                         "'mac': '"MAC_PRIMARY"'}");
+
+    check_cards(qts, true, true);
+
+    args = qdict_from_jsonf_nofail("{}");
+    g_assert_nonnull(args);
+    qdict_put_str(args, "uri", uri);
+
+    resp = qtest_qmp(qts, "{ 'execute': 'migrate', 'arguments': %p}", args);
+    g_assert(qdict_haskey(resp, "return"));
+    qobject_unref(resp);
+
+    resp = qtest_qmp_eventwait_ref(qts, "UNPLUG_PRIMARY");
+    g_assert(qdict_haskey(resp, "data"));
+
+    data = qdict_get_qdict(resp, "data");
+    g_assert(qdict_haskey(data, "device-id"));
+    g_assert_cmpstr(qdict_get_str(data, "device-id"), ==, "primary0");
+
+    qobject_unref(resp);
+
+    /*
+     * normaly OS manages the hotunplug request and we should wait for:
+     *   qtest_qmp_eventwait(qts, "DEVICE_DELETED");
+     * and then:
+     *   check_cards(qts, true, false);
+     */
+
+    unlink(tmpfile);
+
+    machine_stop(qts);
+}
+
+int main(int argc, char **argv)
+{
+    const char *arch;
+
+    g_test_init(&argc, &argv, NULL);
+
+    arch = qtest_get_arch();
+    if (strcmp(arch, "i386") && strcmp(arch, "x86_64")) {
+        g_test_message("Skipping test for non-x86");
+        return g_test_run();
+    }
+
+    qtest_add_func("failover-virtio-net/params/error/id", test_error_id);
+    qtest_add_func("failover-virtio-net/params/error/pcie", test_error_pcie);
+    qtest_add_func("failover-virtio-net/params/error/on", test_on);
+    qtest_add_func("failover-virtio-net/params/error/on_mismatch",
+                   test_on_mismatch);
+    qtest_add_func("failover-virtio-net/params/error/off", test_off);
+    qtest_add_func("failover-virtio-net/params/error/enabled", test_enabled);
+    qtest_add_func("failover-virtio-net/params/error/hotplug_1",
+                   test_hotplug_1);
+    qtest_add_func("failover-virtio-net/params/error/hotplug_1_reverse",
+                   test_hotplug_1_reverse);
+    qtest_add_func("failover-virtio-net/params/error/hotplug_2",
+                   test_hotplug_2);
+    qtest_add_func("failover-virtio-net/params/error/hotplug_2_reverse",
+                   test_hotplug_2_reverse);
+    qtest_add_func("failover-virtio-net/params/error/migrate",
+                   test_migrate);
+
+    return g_test_run();
+}
-- 
2.31.1




reply via email to

[Prev in Thread] Current Thread [Next in Thread]