[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-commits] [qemu/qemu] 45876e: hw/m68k: Replace fprintf(stderr, "*\n
From: |
GitHub |
Subject: |
[Qemu-commits] [qemu/qemu] 45876e: hw/m68k: Replace fprintf(stderr, "*\n" with error_... |
Date: |
Tue, 17 Oct 2017 01:53:56 -0700 |
Branch: refs/heads/master
Home: https://github.com/qemu/qemu
Commit: 45876e913e169bf156a3fc36f21eb0adf6ec3671
https://github.com/qemu/qemu/commit/45876e913e169bf156a3fc36f21eb0adf6ec3671
Author: Alistair Francis <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M hw/m68k/an5206.c
M hw/m68k/mcf5206.c
M hw/m68k/mcf5208.c
Log Message:
-----------
hw/m68k: Replace fprintf(stderr, "*\n" with error_report()
Replace a large number of the fprintf(stderr, "*\n" calls with
error_report(). The functions were renamed with these commands and then
compiler issues where manually fixed.
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N;N; {s|fprintf(stderr,
"\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}'
\
{} +
find ./* -type f -exec sed -i \
'N;N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N;N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
find ./* -type f -exec sed -i \
'N; {s|fprintf(stderr, "\(.*\)\\n"\(.*\));|error_report("\1"\2);|Ig}' \
{} +
Some lines where then manually tweaked to pass checkpatch.
Signed-off-by: Alistair Francis <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
[thuth: Remove "qemu:" prefix from strings]
Signed-off-by: Thomas Huth <address@hidden>
Commit: d3c9218840c070f1c81ac20bc02fb6aafc6e3803
https://github.com/qemu/qemu/commit/d3c9218840c070f1c81ac20bc02fb6aafc6e3803
Author: Marc-André Lureau <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M hw/m68k/mcf5206.c
M hw/m68k/mcf5208.c
Log Message:
-----------
M68K: use g_new() family of functions
Signed-off-by: Marc-André Lureau <address@hidden>
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
[PMD: squashed commits]
Reviewed-by: Thomas Huth <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
Commit: 790bbb9768e6a21920e76989f931db80ca67dc10
https://github.com/qemu/qemu/commit/790bbb9768e6a21920e76989f931db80ca67dc10
Author: Marc-André Lureau <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M tests/ahci-test.c
M tests/fw_cfg-test.c
M tests/libqos/ahci.c
M tests/libqos/libqos.c
M tests/libqos/malloc.c
M tests/libqtest.c
M tests/pc-cpu-test.c
Log Message:
-----------
tests: use g_new() family of functions
Signed-off-by: Marc-André Lureau <address@hidden>
Signed-off-by: Philippe Mathieu-Daudé <address@hidden>
[PMD: split of some files in other commits of the same series, add libqtest.c]
Acked-by: John Snow <address@hidden>
Reviewed-by: Thomas Huth <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
Commit: b95b5a0a52b323533a7b5b2a0deedc7e9c6befd9
https://github.com/qemu/qemu/commit/b95b5a0a52b323533a7b5b2a0deedc7e9c6befd9
Author: Thomas Huth <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M tests/prom-env-test.c
Log Message:
-----------
tests/prom-env: Bump the timeout, and test pseries only in slow mode
If QEMU has been compiled with the flags --enable-tcg-interpreter and
--enable-debug, the guest is running incredibly slow. The prom-env
test is approximately 10 times slower than normal in this case, and
it takes up to 500 seconds until the test with the pseries machine
finishs. While we should still look for ways to speed up the test
on the pseries machine here, let's bump the timeout to 600 seconds to
allow the test to pass with this unusal configuration already now.
Also move the pseries test into the "slow" category - since it is
really a very slow test.
Reviewed-by: Stefan Weil <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
Commit: 03bf6b5c08c792f5c2b55d6038e9a6acbf43d9c3
https://github.com/qemu/qemu/commit/03bf6b5c08c792f5c2b55d6038e9a6acbf43d9c3
Author: Thomas Huth <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M default-configs/i386-softmmu.mak
M default-configs/pci.mak
M default-configs/x86_64-softmmu.mak
Log Message:
-----------
default-configs: Enable CONFIG_VMXNET3_PCI only on x86
The device can not be instantiated on many non-x86 and just prints
some error messages, e.g.:
$ qemu-system-ppc64 -device vmxnet3 -M g3beige
[vmxnet3][WR][vmxnet3_init_msix]: Failed to initialize MSI-X, error -95
[vmxnet3][WR][vmxnet3_pci_realize]: Failed to initialize MSI-X, configuration
is inconsistent.
Since vmxnet3 is a para-virtualized device that is only useful on x86,
it should also only be enabled on the x86 targets.
Reviewed-by: Dmitry Fleytman <address@hidden>
Signed-off-by: Thomas Huth <address@hidden>
Commit: e24cdd07216890d24468cdcbdd5a3e60b3e9f23b
https://github.com/qemu/qemu/commit/e24cdd07216890d24468cdcbdd5a3e60b3e9f23b
Author: Peter Maydell <address@hidden>
Date: 2017-10-16 (Mon, 16 Oct 2017)
Changed paths:
M default-configs/i386-softmmu.mak
M default-configs/pci.mak
M default-configs/x86_64-softmmu.mak
M hw/m68k/an5206.c
M hw/m68k/mcf5206.c
M hw/m68k/mcf5208.c
M tests/ahci-test.c
M tests/fw_cfg-test.c
M tests/libqos/ahci.c
M tests/libqos/libqos.c
M tests/libqos/malloc.c
M tests/libqtest.c
M tests/pc-cpu-test.c
M tests/prom-env-test.c
Log Message:
-----------
Merge remote-tracking branch 'remotes/huth/tags/pull-request-2017-10-16' into
staging
Some m68k, qtest and config improvements
# gpg: Signature made Mon 16 Oct 2017 13:38:03 BST
# gpg: using RSA key 0x2ED9D774FE702DB5
# gpg: Good signature from "Thomas Huth <address@hidden>"
# gpg: aka "Thomas Huth <address@hidden>"
# gpg: aka "Thomas Huth <address@hidden>"
# gpg: aka "Thomas Huth <address@hidden>"
# Primary key fingerprint: 27B8 8847 EEE0 2501 18F3 EAB9 2ED9 D774 FE70 2DB5
* remotes/huth/tags/pull-request-2017-10-16:
default-configs: Enable CONFIG_VMXNET3_PCI only on x86
tests/prom-env: Bump the timeout, and test pseries only in slow mode
tests: use g_new() family of functions
M68K: use g_new() family of functions
hw/m68k: Replace fprintf(stderr, "*\n" with error_report()
Signed-off-by: Peter Maydell <address@hidden>
Compare: https://github.com/qemu/qemu/compare/c5bbcaa4b7c0...e24cdd072168
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-commits] [qemu/qemu] 45876e: hw/m68k: Replace fprintf(stderr, "*\n" with error_...,
GitHub <=