[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] QEMU 0.5.3 release
From: |
Herbert Poetzl |
Subject: |
Re: [Qemu-devel] QEMU 0.5.3 release |
Date: |
Sun, 4 Apr 2004 20:31:19 +0200 |
User-agent: |
Mutt/1.4.1i |
On Sun, Apr 04, 2004 at 05:41:39PM +0200, Fabrice Bellard wrote:
> Hi,
>
> QEMU 0.5.3 is available at http://bellard.org/qemu/.
hmm, and I have the first issues ...
# qemu-0.5.3/i386/qemu-fast -nographic -L qemu-0.5.3/pc-bios -m 128 -snapshot
-hda IMGs/TEST_32M.img -hdb IMGs/TEST_256M.img -kernel
linux-2.6.5-vs1.9.0pre1-XB/arch/i386/boot/bzImage -append "rw root=/dev/hda1"
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: QEMU HARDDISK, ATA DISK drive
hdc: QEMU CD-ROM, ATAPI CD/DVD-ROM drive
Using anticipatory io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 65537 sectors (33 MB) w/256KiB Cache, CHS=65/16/63
/dev/ide/host0/bus0/target0/lun0:<4>hda: set_multmode: status=0x41 {
DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
...
VFS: Cannot open root device "hda1" or hda1
Please append a correct "root=" boot option
Kernel panic: VFS: Unable to mount root fs on hda1
<4>Losing too many ticks!
TSC cannot be used as a timesource. <4>Possible reasons for this are:
You're running with Speedstep,
You don't have DMA enabled for your hard disk (see hdparm),
Incorrect TSC synchronization on an SMP system (see dmesg).
Falling back to a sane timesource now.
where 0.5.2 with the same options gives ...
ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx
hda: QEMU HARDDISK, ATA DISK drive
hdb: QEMU HARDDISK, ATA DISK drive
hda: 65537 sectors (33 MB) w/256KiB Cache, CHS=65/16/63
/dev/ide/host0/bus0/target0/lun0:<4>hda: set_multmode: status=0x41 {
DriveReady Error }
hda: set_multmode: error=0x04 { DriveStatusError }
p1
hdb: max request size: 128KiB
hdb: 524289 sectors (268 MB) w/256KiB Cache, CHS=520/16/63
/dev/ide/host0/bus0/target1/lun0:<4>hdb: set_multmode: status=0x41 {
DriveReady Error }
hdb: set_multmode: error=0x04 { DriveStatusError }
p1
and everything works fine ...
if you need any additional info, please let me know ...
TIA,
Herbert
> Changelog:
>
> version 0.5.3:
>
> - added Bochs VESA VBE support
> - VGA memory map mode 3 access fix (OS/2 install fix)
> - IDE fixes (Jens Axboe)
> - CPU interrupt fixes
> - fixed various TLB invalidation cases (NT install)
> - fixed cr0.WP semantics (XP install)
> - direct chaining support for SPARC and PowerPC (faster)
> - ARM NWFPE support (initial patch by Ulrich Hecht)
> - added specific x86 to x86 translator (close to native performance
> in qemu-i386 and qemu-fast)
> - shm syscalls support (Paul McKerras)
> - added accurate CR0.MP/ME/TS emulation
> - fixed DMA memory write access (Win95 boot floppy fix)
> - graphical x86 linux loader
> - command line monitor
> - generic removable device support
> - support of CD-ROM change
> - multiple network interface support
> - initial x86-64 host support (Gwenole Beauchesne)
> - lret to outer priviledge fix (OS/2 install fix)
> - task switch fixes (SkyOS boot)
> - VM save/restore commands
> - new timer API
> - more precise RTC emulation (periodic timers + time updates)
> - Win32 port (initial patch by Kazu)
>
> Fabrice.
>
>
>
> _______________________________________________
> Qemu-devel mailing list
> address@hidden
> http://mail.nongnu.org/mailman/listinfo/qemu-devel