RE: [Qemu-devel] win64

[ZIGLIO, Frediano, VF-IT]

I tried with
- Fedora Core 5 x86-64 in rescue mode
- Ubuntu 6.06 live DVD x86
they works, I can use a ssh session without problems. I tried scp with Ubuntu, 
speed was about 530KB/s. In both cases I used user mode (-net nic,model=rtl8139 
-net user). Perhaps it would fine to add a rtl8139too like Linux...

freddy77

> -----Original Message-----
> From: 
> address@hidden 
> [mailto:address@hidden
> .org] On Behalf Of Fabrice Bellard
> Sent: lunedì 26 giugno 2006 21.58
> To: address@hidden
> Subject: Re: [Qemu-devel] win64
> 
> If it works with Linux too then I can change it without 
> leaving the old 
> value...
> 
> Fabrice.
> 
> ZIGLIO, Frediano, VF-IT wrote:
> > I got windows xp 64 working using current CVS.
> > I still have problems with network, I had to use this patch
> > 
> > Index: hw/rtl8139.c
> > ===================================================================
> > RCS file: /sources/qemu/qemu/hw/rtl8139.c,v
> > retrieving revision 1.1
> > diff -u -1 -0 -r1.1 rtl8139.c
> > --- hw/rtl8139.c        5 Feb 2006 04:14:41 -0000       1.1
> > +++ hw/rtl8139.c        26 Jun 2006 08:44:49 -0000
> > @@ -2826,21 +2826,21 @@
> >      d = (PCIRTL8139State *)pci_register_device(bus,
> >                                                "RTL8139",
> > sizeof(PCIRTL8139State),
> >                                                -1,
> >                                                NULL, NULL);
> >      pci_conf = d->dev.config;
> >      pci_conf[0x00] = 0xec; /* Realtek 8139 */
> >      pci_conf[0x01] = 0x10;
> >      pci_conf[0x02] = 0x39;
> >      pci_conf[0x03] = 0x81;
> >      pci_conf[0x04] = 0x05; /* command = I/O space, Bus Master */
> > -    pci_conf[0x08] = 0x20; /* 0x10 */ /* PCI revision ID; 
> >=0x20 is for
> > 8139C+ */
> > +    pci_conf[0x08] = 0x10; /* 0x10 */ /* PCI revision ID; 
> >=0x20 is for
> > 8139C+ */
> >      pci_conf[0x0a] = 0x00; /* ethernet network controller */
> >      pci_conf[0x0b] = 0x02;
> >      pci_conf[0x0e] = 0x00; /* header_type */
> >      pci_conf[0x3d] = 1;    /* interrupt pin 0 */
> >      pci_conf[0x34] = 0xdc;
> > 
> >      s = &d->rtl8139;
> > 
> >      /* I/O handler for memory-mapped I/O */
> >      s->rtl8139_mmio_io_addr =
> > 
> > without it using rtl3139 card windows hangs (it don't have 
> driver for
> > ne2000). Perhaps it would be helpful to add a rtl8139old card.
> > With patch all is working however saving state and restoring (after
> > quitting qemu) cause machine to hangs (mouse do not move, 
> cursors do not
> > blink, remote desktop give timeout but I can see cpu 
> activity with info
> > registers).
> > 
> > bye
> >   Frediano Ziglio
> >