[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RESEND] [PATCH] Make use of temporaries as registers condi
From: |
Alexander Graf |
Subject: |
[Qemu-devel] [RESEND] [PATCH] Make use of temporaries as registers conditional (fixes gcc4 i386 host) |
Date: |
Mon, 21 Jan 2008 08:23:39 +0100 |
User-agent: |
Thunderbird 2.0.0.9 (X11/20070801) |
Hi,
this is a mostly a resend of the very same patch I sent to the list a
few days ago. I believe I fixed most issues (wrong endif, gcc3
breakage). Please tell me if this patch breaks already working setups,
as it should only make _more_ things work than before.
If anybody has a really valid point for this to not be included into
qemu, please tell me. I don't really see "I don't like fixing gcc
dependencies" as such, as that's what had to be done for gcc3 too already.
Regards,
Alex
Index: qemu/softmmu_header.h
===================================================================
--- qemu.orig/softmmu_header.h
+++ qemu/softmmu_header.h
@@ -189,9 +189,15 @@ static inline void glue(glue(st, SUFFIX)
#else
#error unsupported size
#endif
+#ifdef GCC_BREAKS_T_REGISTER
+ "pushl %%ecx\n"
+#endif
"pushl %6\n"
"call %7\n"
"popl %%eax\n"
+#ifdef GCC_BREAKS_T_REGISTER
+ "popl %%ecx\n"
+#endif
"jmp 2f\n"
"1:\n"
"addl 8(%%edx), %%eax\n"
@@ -209,14 +215,22 @@ static inline void glue(glue(st, SUFFIX)
: "r" (ptr),
/* NOTE: 'q' would be needed as constraint, but we could not use it
with T1 ! */
+#if (DATA_SIZE == 1 || DATA_SIZE == 2) && GCC_BREAKS_T_REGISTER
+ "q" (v),
+#else
"r" (v),
+#endif
"i" ((CPU_TLB_SIZE - 1) << CPU_TLB_ENTRY_BITS),
"i" (TARGET_PAGE_BITS - CPU_TLB_ENTRY_BITS),
"i" (TARGET_PAGE_MASK | (DATA_SIZE - 1)),
"m" (*(uint32_t *)offsetof(CPUState,
tlb_table[CPU_MMU_INDEX][0].addr_write)),
"i" (CPU_MMU_INDEX),
"m" (*(uint8_t *)&glue(glue(__st, SUFFIX), MMUSUFFIX))
+#ifdef GCC_BREAKS_T_REGISTER
+ : "%eax", "%edx", "memory", "cc");
+#else
: "%eax", "%ecx", "%edx", "memory", "cc");
+#endif
}
#else
Index: qemu/target-alpha/cpu.h
===================================================================
--- qemu.orig/target-alpha/cpu.h
+++ qemu/target-alpha/cpu.h
@@ -275,6 +275,8 @@ struct CPUAlphaState {
* used to emulate 64 bits target on 32 bits hosts
*/
target_ulong t0, t1, t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t2;
#endif
/* */
double ft0, ft1, ft2;
Index: qemu/target-alpha/exec.h
===================================================================
--- qemu.orig/target-alpha/exec.h
+++ qemu/target-alpha/exec.h
@@ -36,6 +36,12 @@ register struct CPUAlphaState *env asm(A
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+
+register uint64_t T0 asm(AREG1);
+register uint64_t T1 asm(AREG2);
+#define T2 (env->t2)
+
#else
register uint64_t T0 asm(AREG1);
Index: qemu/target-arm/cpu.h
===================================================================
--- qemu.orig/target-arm/cpu.h
+++ qemu/target-arm/cpu.h
@@ -66,6 +66,9 @@ typedef uint32_t ARMReadCPFunc(void *opa
*/
typedef struct CPUARMState {
+#if defined(GCC_BREAKS_T_REGISTER)
+ uint32_t t2;
+#endif
/* Regs for current mode. */
uint32_t regs[16];
/* Frequently accessed CPSR bits are stored separately for efficiently.
Index: qemu/target-arm/exec.h
===================================================================
--- qemu.orig/target-arm/exec.h
+++ qemu/target-arm/exec.h
@@ -23,7 +23,12 @@
register struct CPUARMState *env asm(AREG0);
register uint32_t T0 asm(AREG1);
register uint32_t T1 asm(AREG2);
+#if defined(GCC_BREAKS_T_REGISTER)
+#define T2 (env->t2)
+#else
register uint32_t T2 asm(AREG3);
+#endif
+
/* TODO: Put these in FP regs on targets that have such things. */
/* It is ok for FT0s and FT0d to overlap. Likewise FT1s and FT1d. */
Index: qemu/target-i386/cpu.h
===================================================================
--- qemu.orig/target-i386/cpu.h
+++ qemu/target-i386/cpu.h
@@ -470,6 +470,8 @@ typedef struct CPUX86State {
#if TARGET_LONG_BITS > HOST_LONG_BITS
/* temporaries if we cannot store them in host registers */
target_ulong t0, t1, t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t1;
#endif
/* standard registers */
Index: qemu/target-i386/exec.h
===================================================================
--- qemu.orig/target-i386/exec.h
+++ qemu/target-i386/exec.h
@@ -39,6 +39,12 @@ register struct CPUX86State *env asm(ARE
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+
+register target_ulong T0 asm(AREG1);
+#define T1 (env->t1)
+register target_ulong T2 asm(AREG3);
+
#else
/* XXX: use unsigned long instead of target_ulong - better code will
Index: qemu/target-mips/cpu.h
===================================================================
--- qemu.orig/target-mips/cpu.h
+++ qemu/target-mips/cpu.h
@@ -149,6 +149,8 @@ struct CPUMIPSState {
target_ulong t0;
target_ulong t1;
target_ulong t2;
+#elif defined(GCC_BREAKS_T_REGISTER)
+ target_ulong t2;
#endif
target_ulong HI[MIPS_DSP_ACC][MIPS_TC_MAX];
target_ulong LO[MIPS_DSP_ACC][MIPS_TC_MAX];
Index: qemu/target-mips/exec.h
===================================================================
--- qemu.orig/target-mips/exec.h
+++ qemu/target-mips/exec.h
@@ -14,6 +14,10 @@ register struct CPUMIPSState *env asm(AR
#define T0 (env->t0)
#define T1 (env->t1)
#define T2 (env->t2)
+#elif defined(GCC_BREAKS_T_REGISTER)
+register target_ulong T0 asm(AREG1);
+register target_ulong T1 asm(AREG2);
+#define T2 (env->t2)
#else
register target_ulong T0 asm(AREG1);
register target_ulong T1 asm(AREG2);
Index: qemu/target-ppc/exec.h
===================================================================
--- qemu.orig/target-ppc/exec.h
+++ qemu/target-ppc/exec.h
@@ -38,10 +38,14 @@ register struct CPUPPCState *env asm(ARE
#define T1 (env->t1)
#define T2 (env->t2)
#define TDX "%016" PRIx64
+#elif defined(GCC_BREAKS_T_REGISTER)
+register unsigned long T0 asm(AREG1);
+register unsigned long T1 asm(AREG2);
+#define T2 (env->t2)
#else
register unsigned long T0 asm(AREG1);
register unsigned long T1 asm(AREG2);
register unsigned long T2 asm(AREG3);
#define TDX "%016lx"
#endif
/* We may, sometime, need 64 bits registers on 32 bits targets */
Index: qemu/target-sparc/exec.h
===================================================================
--- qemu.orig/target-sparc/exec.h
+++ qemu/target-sparc/exec.h
@@ -32,9 +32,13 @@ register uint32_t T2 asm(AREG4);
#else
#define REGWPTR env->regwptr
+#if !defined(GCC_BREAKS_T_REGISTER)
register uint32_t T2 asm(AREG3);
-#endif
#define reg_T2
+#else
+#define T2 (env->t2)
+#endif
+#endif
#endif
#define FT0 (env->ft0)
Index: qemu/configure
===================================================================
--- qemu.orig/configure
+++ qemu/configure
@@ -806,6 +806,12 @@ echo "AIOLIBS=$AIOLIBS" >> $config_mak
if test "$cpu" = "i386" ; then
echo "ARCH=i386" >> $config_mak
echo "#define HOST_I386 1" >> $config_h
+
+ # add check for gcc4 breakage
+ echo "#if (__GNUC__ > 3)" >> $config_h
+ echo "#define GCC_BREAKS_T_REGISTER" >> $config_h
+ echo "#endif" >> $config_h
+
elif test "$cpu" = "x86_64" ; then
echo "ARCH=x86_64" >> $config_mak
echo "#define HOST_X86_64 1" >> $config_h
- [Qemu-devel] [RESEND] [PATCH] Make use of temporaries as registers conditional (fixes gcc4 i386 host),
Alexander Graf <=