[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 6/7] atapi: made some part of ide.c public and moved
|
From: |
Alexandre Bique |
|
Subject: |
[Qemu-devel] [PATCH 6/7] atapi: made some part of ide.c public and moved some part to atapi. |
|
Date: |
Fri, 7 Aug 2009 18:33:11 +0100 |
Signed-off-by: Alexandre Bique <address@hidden>
---
hw/atapi-data.c | 269 ++++++++++++++++++++++++++
hw/atapi-defines.h | 234 ++++++++++++++++++++++
hw/ide.c | 544 ++--------------------------------------------------
hw/ide.h | 377 ++++++++++++++++++++++++++++++++++++
4 files changed, 893 insertions(+), 531 deletions(-)
create mode 100644 hw/atapi-data.c
create mode 100644 hw/atapi-defines.h
create mode 100644 hw/ide.h
diff --git a/hw/atapi-data.c b/hw/atapi-data.c
new file mode 100644
index 0000000..b995b77
--- /dev/null
+++ b/hw/atapi-data.c
@@ -0,0 +1,269 @@
+/*
+ * ATAPI pass through addition data
+ *
+ * Copyright (c) 2009 Alexandre Bique
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#include "atapi-defines.h"
+
+/* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned short packet_command;
+ const char * const text;
+} packet_command_texts[] = {
+ { GPCMD_TEST_UNIT_READY, "Test Unit Ready" },
+ { GPCMD_REQUEST_SENSE, "Request Sense" },
+ { GPCMD_FORMAT_UNIT, "Format Unit" },
+ { GPCMD_INQUIRY, "Inquiry" },
+ { GPCMD_START_STOP_UNIT, "Start/Stop Unit" },
+ { GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL, "Prevent/Allow Medium Removal" },
+ { GPCMD_READ_FORMAT_CAPACITIES, "Read Format Capacities" },
+ { GPCMD_READ_CDVD_CAPACITY, "Read Cd/Dvd Capacity" },
+ { GPCMD_READ_10, "Read 10" },
+ { GPCMD_WRITE_10, "Write 10" },
+ { GPCMD_SEEK, "Seek" },
+ { GPCMD_WRITE_AND_VERIFY_10, "Write and Verify 10" },
+ { GPCMD_VERIFY_10, "Verify 10" },
+ { GPCMD_FLUSH_CACHE, "Flush Cache" },
+ { GPCMD_READ_SUBCHANNEL, "Read Subchannel" },
+ { GPCMD_READ_TOC_PMA_ATIP, "Read Table of Contents" },
+ { GPCMD_READ_HEADER, "Read Header" },
+ { GPCMD_PLAY_AUDIO_10, "Play Audio 10" },
+ { GPCMD_GET_CONFIGURATION, "Get Configuration" },
+ { GPCMD_PLAY_AUDIO_MSF, "Play Audio MSF" },
+ { GPCMD_PLAYAUDIO_TI, "Play Audio TrackIndex" },
+ { GPCMD_GET_EVENT_STATUS_NOTIFICATION,
+ "Get Event Status Notification" },
+ { GPCMD_PAUSE_RESUME, "Pause/Resume" },
+ { GPCMD_STOP_PLAY_SCAN, "Stop Play/Scan" },
+ { GPCMD_READ_DISC_INFO, "Read Disc Info" },
+ { GPCMD_READ_TRACK_RZONE_INFO, "Read Track Rzone Info" },
+ { GPCMD_RESERVE_RZONE_TRACK, "Reserve Rzone Track" },
+ { GPCMD_SEND_OPC, "Send OPC" },
+ { GPCMD_MODE_SELECT_10, "Mode Select 10" },
+ { GPCMD_REPAIR_RZONE_TRACK, "Repair Rzone Track" },
+ { GPCMD_MODE_SENSE_10, "Mode Sense 10" },
+ { GPCMD_CLOSE_TRACK, "Close Track" },
+ { GPCMD_BLANK, "Blank" },
+ { GPCMD_SEND_EVENT, "Send Event" },
+ { GPCMD_SEND_KEY, "Send Key" },
+ { GPCMD_REPORT_KEY, "Report Key" },
+ { GPCMD_LOAD_UNLOAD, "Load/Unload" },
+ { GPCMD_SET_READ_AHEAD, "Set Read-ahead" },
+ { GPCMD_READ_12, "Read 12" },
+ { GPCMD_GET_PERFORMANCE, "Get Performance" },
+ { GPCMD_SEND_DVD_STRUCTURE, "Send DVD Structure" },
+ { GPCMD_READ_DVD_STRUCTURE, "Read DVD Structure" },
+ { GPCMD_SET_STREAMING, "Set Streaming" },
+ { GPCMD_READ_CD_MSF, "Read CD MSF" },
+ { GPCMD_SCAN, "Scan" },
+ { GPCMD_SET_SPEED, "Set Speed" },
+ { GPCMD_PLAY_CD, "Play CD" },
+ { GPCMD_MECHANISM_STATUS, "Mechanism Status" },
+ { GPCMD_READ_CD, "Read CD" },
+ { GPCMD_READ_BUFFER_CAPACITY, "Read Buffer Capacity" },
+ { GPCMD_READ_BUFFER, "Read Buffer" },
+ { GPCMD_SEND_CUE_SHEET, "Send Cue Sheet" },
+ { 0, 0 }
+};
+
+const char *atapi_cmd_to_str(int cmd)
+{
+ int i;
+
+ for (i = 0; packet_command_texts[i].text; ++i)
+ if (packet_command_texts[i].packet_command == cmd)
+ return packet_command_texts[i].text;
+ return 0;
+}
+
+/* From Table 303 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+const char * const sense_key_texts[16] = {
+ "No sense data",
+ "Recovered error",
+ "Not ready",
+ "Medium error",
+ "Hardware error",
+ "Illegal request",
+ "Unit attention",
+ "Data protect",
+ "Blank check",
+ "(reserved)",
+ "(reserved)",
+ "Aborted command",
+ "(reserved)",
+ "(reserved)",
+ "Miscompare",
+ "(reserved)",
+};
+
+/* From Table 304 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+static const struct {
+ unsigned long asc_ascq;
+ const char * const text;
+} sense_data_texts[] = {
+ { 0x000000, "No additional sense information" },
+ { 0x000011, "Play operation in progress" },
+ { 0x000012, "Play operation paused" },
+ { 0x000013, "Play operation successfully completed" },
+ { 0x000014, "Play operation stopped due to error" },
+ { 0x000015, "No current audio status to return" },
+ { 0x010c0a, "Write error - padding blocks added" },
+ { 0x011700, "Recovered data with no error correction applied" },
+ { 0x011701, "Recovered data with retries" },
+ { 0x011702, "Recovered data with positive head offset" },
+ { 0x011703, "Recovered data with negative head offset" },
+ { 0x011704, "Recovered data with retries and/or CIRC applied" },
+ { 0x011705, "Recovered data using previous sector ID" },
+ { 0x011800, "Recovered data with error correction applied" },
+ { 0x011801, "Recovered data with error correction and retries applied"},
+ { 0x011802, "Recovered data - the data was auto-reallocated" },
+ { 0x011803, "Recovered data with CIRC" },
+ { 0x011804, "Recovered data with L-EC" },
+ { 0x015d00, "Failure prediction threshold exceeded"
+ " - Predicted logical unit failure" },
+ { 0x015d01, "Failure prediction threshold exceeded"
+ " - Predicted media failure" },
+ { 0x015dff, "Failure prediction threshold exceeded - False" },
+ { 0x017301, "Power calibration area almost full" },
+ { 0x020400, "Logical unit not ready - cause not reportable" },
+ /* Following is misspelled in ATAPI 2.6, _and_ in Mt. Fuji */
+ { 0x020401, "Logical unit not ready"
+ " - in progress [sic] of becoming ready" },
+ { 0x020402, "Logical unit not ready - initializing command required" },
+ { 0x020403, "Logical unit not ready - manual intervention required" },
+ { 0x020404, "Logical unit not ready - format in progress" },
+ { 0x020407, "Logical unit not ready - operation in progress" },
+ { 0x020408, "Logical unit not ready - long write in progress" },
+ { 0x020600, "No reference position found (media may be upside down)" },
+ { 0x023000, "Incompatible medium installed" },
+ { 0x023a00, "Medium not present" },
+ { 0x025300, "Media load or eject failed" },
+ { 0x025700, "Unable to recover table of contents" },
+ { 0x030300, "Peripheral device write fault" },
+ { 0x030301, "No write current" },
+ { 0x030302, "Excessive write errors" },
+ { 0x030c00, "Write error" },
+ { 0x030c01, "Write error - Recovered with auto reallocation" },
+ { 0x030c02, "Write error - auto reallocation failed" },
+ { 0x030c03, "Write error - recommend reassignment" },
+ { 0x030c04, "Compression check miscompare error" },
+ { 0x030c05, "Data expansion occurred during compress" },
+ { 0x030c06, "Block not compressible" },
+ { 0x030c07, "Write error - recovery needed" },
+ { 0x030c08, "Write error - recovery failed" },
+ { 0x030c09, "Write error - loss of streaming" },
+ { 0x031100, "Unrecovered read error" },
+ { 0x031106, "CIRC unrecovered error" },
+ { 0x033101, "Format command failed" },
+ { 0x033200, "No defect spare location available" },
+ { 0x033201, "Defect list update failure" },
+ { 0x035100, "Erase failure" },
+ { 0x037200, "Session fixation error" },
+ { 0x037201, "Session fixation error writin lead-in" },
+ { 0x037202, "Session fixation error writin lead-out" },
+ { 0x037300, "CD control error" },
+ { 0x037302, "Power calibration area is full" },
+ { 0x037303, "Power calibration area error" },
+ { 0x037304, "Program memory area / RMA update failure" },
+ { 0x037305, "Program memory area / RMA is full" },
+ { 0x037306, "Program memory area / RMA is (almost) full" },
+ { 0x040200, "No seek complete" },
+ { 0x040300, "Write fault" },
+ { 0x040900, "Track following error" },
+ { 0x040901, "Tracking servo failure" },
+ { 0x040902, "Focus servo failure" },
+ { 0x040903, "Spindle servo failure" },
+ { 0x041500, "Random positioning error" },
+ { 0x041501, "Mechanical positioning or changer error" },
+ { 0x041502, "Positioning error detected by read of medium" },
+ { 0x043c00, "Mechanical positioning or changer error" },
+ { 0x044000, "Diagnostic failure on component (ASCQ)" },
+ { 0x044400, "Internal CD/DVD logical unit failure" },
+ { 0x04b600, "Media load mechanism failed" },
+ { 0x051a00, "Parameter list length error" },
+ { 0x052000, "Invalid command operation code" },
+ { 0x052100, "Logical block address out of range" },
+ { 0x052102, "Invalid address for write" },
+ { 0x052400, "Invalid field in command packet" },
+ { 0x052600, "Invalid field in parameter list" },
+ { 0x052601, "Parameter not supported" },
+ { 0x052602, "Parameter value invalid" },
+ { 0x052700, "Write protected media" },
+ { 0x052c00, "Command sequence error" },
+ { 0x052c03, "Current program area is not empty" },
+ { 0x052c04, "Current program area is empty" },
+ { 0x053001, "Cannot read medium - unknown format" },
+ { 0x053002, "Cannot read medium - incompatible format" },
+ { 0x053900, "Saving parameters not supported" },
+ { 0x054e00, "Overlapped commands attempted" },
+ { 0x055302, "Medium removal prevented" },
+ { 0x055500, "System resource failure" },
+ { 0x056300, "End of user area encountered on this track" },
+ { 0x056400, "Illegal mode for this track or incompatible medium" },
+ { 0x056f00, "Copy protection key exchange failure"
+ " - Authentication failure" },
+ { 0x056f01, "Copy protection key exchange failure - Key not present" },
+ { 0x056f02, "Copy protection key exchange failure"
+ " - Key not established" },
+ { 0x056f03, "Read of scrambled sector without authentication" },
+ { 0x056f04, "Media region code is mismatched to logical unit" },
+ { 0x056f05, "Drive region must be permanent"
+ " / region reset count error" },
+ { 0x057203, "Session fixation error - incomplete track in session" },
+ { 0x057204, "Empty or partially written reserved track" },
+ { 0x057205, "No more RZONE reservations are allowed" },
+ { 0x05bf00, "Loss of streaming" },
+ { 0x062800, "Not ready to ready transition, medium may have changed" },
+ { 0x062900, "Power on, reset or hardware reset occurred" },
+ { 0x062a00, "Parameters changed" },
+ { 0x062a01, "Mode parameters changed" },
+ { 0x062e00, "Insufficient time for operation" },
+ { 0x063f00, "Logical unit operating conditions have changed" },
+ { 0x063f01, "Microcode has been changed" },
+ { 0x065a00, "Operator request or state change input (unspecified)" },
+ { 0x065a01, "Operator medium removal request" },
+ { 0x0bb900, "Play operation aborted" },
+ /* Here we use 0xff for the key (not a valid key) to signify
+ * that these can have _any_ key value associated with them... */
+ { 0xff0401, "Logical unit is in process of becoming ready" },
+ { 0xff0400, "Logical unit not ready, cause not reportable" },
+ { 0xff0402, "Logical unit not ready, initializing command required" },
+ { 0xff0403, "Logical unit not ready, manual intervention required" },
+ { 0xff0500, "Logical unit does not respond to selection" },
+ { 0xff0800, "Logical unit communication failure" },
+ { 0xff0802, "Logical unit communication parity error" },
+ { 0xff0801, "Logical unit communication time-out" },
+ { 0xff2500, "Logical unit not supported" },
+ { 0xff4c00, "Logical unit failed self-configuration" },
+ { 0xff3e00, "Logical unit has not self-configured yet" },
+};
+
+const char *atapi_ascq_to_str(int ascq)
+{
+ int i;
+
+ for (i = 0; sense_data_texts[i].text; ++i)
+ if (sense_data_texts[i].asc_ascq == ascq)
+ return sense_data_texts[i].text;
+ return 0;
+}
diff --git a/hw/atapi-defines.h b/hw/atapi-defines.h
new file mode 100644
index 0000000..82b1da4
--- /dev/null
+++ b/hw/atapi-defines.h
@@ -0,0 +1,234 @@
+/*
+ * ATAPI definitions
+ *
+ * Copyright (c) 2009 Alexandre Bique
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef ATAPI_DEFINES_H
+#define ATAPI_DEFINES_H
+
+/* ATAPI defines */
+
+#define ATAPI_PACKET_SIZE 12
+
+/*********************************************************************
+ * Generic Packet commands, MMC commands, and such
+ *********************************************************************/
+
+ /* The generic packet command opcodes for CD/DVD Logical Units,
+ * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
+#define GPCMD_BLANK 0xa1
+#define GPCMD_CLOSE_TRACK 0x5b
+#define GPCMD_FLUSH_CACHE 0x35
+#define GPCMD_FORMAT_UNIT 0x04
+#define GPCMD_GET_CONFIGURATION 0x46
+#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
+#define GPCMD_GET_PERFORMANCE 0xac
+#define GPCMD_INQUIRY 0x12
+#define GPCMD_LOAD_UNLOAD 0xa6
+#define GPCMD_MECHANISM_STATUS 0xbd
+#define GPCMD_MODE_SELECT_10 0x55
+#define GPCMD_MODE_SENSE_10 0x5a
+#define GPCMD_PAUSE_RESUME 0x4b
+#define GPCMD_PLAY_AUDIO_10 0x45
+#define GPCMD_PLAY_AUDIO_MSF 0x47
+#define GPCMD_PLAY_AUDIO_TI 0x48
+#define GPCMD_PLAY_CD 0xbc
+#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
+#define GPCMD_READ_10 0x28
+#define GPCMD_READ_12 0xa8
+#define GPCMD_READ_BUFFER 0x3c
+#define GPCMD_READ_BUFFER_CAPACITY 0x5c
+#define GPCMD_READ_CDVD_CAPACITY 0x25
+#define GPCMD_READ_CD 0xbe
+#define GPCMD_READ_CD_MSF 0xb9
+#define GPCMD_READ_DISC_INFO 0x51
+#define GPCMD_READ_DVD_STRUCTURE 0xad
+#define GPCMD_READ_FORMAT_CAPACITIES 0x23
+#define GPCMD_READ_HEADER 0x44
+#define GPCMD_READ_TRACK_RZONE_INFO 0x52
+#define GPCMD_READ_SUBCHANNEL 0x42
+#define GPCMD_READ_TOC_PMA_ATIP 0x43
+#define GPCMD_REPAIR_RZONE_TRACK 0x58
+#define GPCMD_REPORT_KEY 0xa4
+#define GPCMD_REQUEST_SENSE 0x03
+#define GPCMD_RESERVE_RZONE_TRACK 0x53
+#define GPCMD_SEND_CUE_SHEET 0x5d
+#define GPCMD_SCAN 0xba
+#define GPCMD_SEEK 0x2b
+#define GPCMD_SEND_DVD_STRUCTURE 0xbf
+#define GPCMD_SEND_EVENT 0xa2
+#define GPCMD_SEND_KEY 0xa3
+#define GPCMD_SEND_OPC 0x54
+#define GPCMD_SET_READ_AHEAD 0xa7
+#define GPCMD_SET_STREAMING 0xb6
+#define GPCMD_START_STOP_UNIT 0x1b
+#define GPCMD_STOP_PLAY_SCAN 0x4e
+#define GPCMD_TEST_UNIT_READY 0x00
+#define GPCMD_VERIFY_10 0x2f
+#define GPCMD_WRITE_10 0x2a
+#define GPCMD_WRITE_12 0xaa
+#define GPCMD_WRITE_AND_VERIFY_10 0x2e
+#define GPCMD_WRITE_BUFFER 0x3b
+/* This is listed as optional in ATAPI 2.6, but is (curiously)
+ * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
+ * Table 377 as an MMC command for SCSi devices though... Most ATAPI
+ * drives support it. */
+#define GPCMD_SET_SPEED 0xbb
+/* This seems to be a SCSI specific CD-ROM opcode
+ * to play data at track/index */
+#define GPCMD_PLAYAUDIO_TI 0x48
+/*
+ * From MS Media Status Notification Support Specification. For
+ * older drives only.
+ */
+#define GPCMD_GET_MEDIA_STATUS 0xda
+#define GPCMD_MODE_SENSE_6 0x1a
+
+/* Mode page codes for mode sense/set */
+#define GPMODE_VENDOR_PAGE 0x00
+#define GPMODE_R_W_ERROR_PAGE 0x01
+#define GPMODE_WRITE_PARMS_PAGE 0x05
+#define GPMODE_WCACHING_PAGE 0x08
+#define GPMODE_AUDIO_CTL_PAGE 0x0e
+#define GPMODE_POWER_PAGE 0x1a
+#define GPMODE_FAULT_FAIL_PAGE 0x1c
+#define GPMODE_TO_PROTECT_PAGE 0x1d
+#define GPMODE_CAPABILITIES_PAGE 0x2a
+#define GPMODE_ALL_PAGES 0x3f
+/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
+ * of MODE_SENSE_POWER_PAGE */
+#define GPMODE_CDROM_PAGE 0x0d
+
+/*
+ * Based on values from <linux/cdrom.h> but extending CD_MINS
+ * to the maximum common size allowed by the Orange's Book ATIP
+ *
+ * 90 and 99 min CDs are also available but using them as the
+ * upper limit reduces the effectiveness of the heuristic to
+ * detect DVDs burned to less than 25% of their maximum capacity
+ */
+
+/* Some generally useful CD-ROM information */
+#define CD_MINS 80 /* max. minutes per CD */
+#define CD_SECS 60 /* seconds per minute */
+#define CD_FRAMES 75 /* frames per second */
+#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
+#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
+#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
+#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
+#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
+#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
+#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
+#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
+#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
+#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
+#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
+#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
+#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
+/* most drives don't deliver everything: */
+#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
+#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
+
+#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
+#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
+
+/*
+ * The MMC values are not IDE specific and might need to be moved
+ * to a common header if they are also needed for the SCSI emulation
+ */
+
+/* Profile list from MMC-6 revision 1 table 91 */
+#define MMC_PROFILE_NONE 0x0000
+#define MMC_PROFILE_CD_ROM 0x0008
+#define MMC_PROFILE_CD_R 0x0009
+#define MMC_PROFILE_CD_RW 0x000A
+#define MMC_PROFILE_DVD_ROM 0x0010
+#define MMC_PROFILE_DVD_R_SR 0x0011
+#define MMC_PROFILE_DVD_RAM 0x0012
+#define MMC_PROFILE_DVD_RW_RO 0x0013
+#define MMC_PROFILE_DVD_RW_SR 0x0014
+#define MMC_PROFILE_DVD_R_DL_SR 0x0015
+#define MMC_PROFILE_DVD_R_DL_JR 0x0016
+#define MMC_PROFILE_DVD_RW_DL 0x0017
+#define MMC_PROFILE_DVD_DDR 0x0018
+#define MMC_PROFILE_DVD_PLUS_RW 0x001A
+#define MMC_PROFILE_DVD_PLUS_R 0x001B
+#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
+#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
+#define MMC_PROFILE_BD_ROM 0x0040
+#define MMC_PROFILE_BD_R_SRM 0x0041
+#define MMC_PROFILE_BD_R_RRM 0x0042
+#define MMC_PROFILE_BD_RE 0x0043
+#define MMC_PROFILE_HDDVD_ROM 0x0050
+#define MMC_PROFILE_HDDVD_R 0x0051
+#define MMC_PROFILE_HDDVD_RAM 0x0052
+#define MMC_PROFILE_HDDVD_RW 0x0053
+#define MMC_PROFILE_HDDVD_R_DL 0x0058
+#define MMC_PROFILE_HDDVD_RW_DL 0x005A
+#define MMC_PROFILE_INVALID 0xFFFF
+
+
+#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
+#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
+#define ATAPI_INT_REASON_REL 0x04
+#define ATAPI_INT_REASON_TAG 0xf8
+
+/* same constants as bochs */
+#define ASC_NONE 0x00
+#define ASC_READ_ERROR 0x11
+#define ASC_ILLEGAL_OPCODE 0x20
+#define ASC_LOGICAL_BLOCK_OOR 0x21
+#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
+#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
+#define ASC_INCOMPATIBLE_FORMAT 0x30
+#define ASC_MEDIUM_NOT_PRESENT 0x3a
+#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
+#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
+
+#define CFA_NO_ERROR 0x00
+#define CFA_MISC_ERROR 0x09
+#define CFA_INVALID_COMMAND 0x20
+#define CFA_INVALID_ADDRESS 0x21
+#define CFA_ADDRESS_OVERFLOW 0x2f
+
+/* Sense keys */
+#define SENSE_NONE 0
+#define SENSE_RECOVERED_ERROR 1
+#define SENSE_NOT_READY 2
+#define SENSE_MEDIUM_ERROR 3
+#define SENSE_HARDWARE_ERROR 4
+#define SENSE_ILLEGAL_REQUEST 5
+#define SENSE_UNIT_ATTENTION 6
+#define SENSE_DATA_PROTECT 7
+#define SENSE_BLANK_CHECK 8
+#define SENSE_VENDOR_SPECIFIC 9
+#define SENSE_COPY_ABORTED 10
+#define SENSE_ABORTED_COMMAND 11
+#define SENSE_VOLUME_OVERFLOW 13
+#define SENSE_MISCOMPARE 14
+
+extern const char * const sense_key_texts[16];
+
+const char *atapi_cmd_to_str(int cmd);
+const char *atapi_ascq_to_str(int ascq);
+
+#endif /* !ATAPI_DEFINES_H */
diff --git a/hw/ide.c b/hw/ide.c
index 5c2693e..9db9cb2 100644
--- a/hw/ide.c
+++ b/hw/ide.c
@@ -35,6 +35,8 @@
#include "mac_dbdma.h"
#include "sh.h"
#include "dma.h"
+#include "ide.h"
+#include "atapi-defines.h"
/* debug IDE devices */
//#define DEBUG_IDE
@@ -42,452 +44,6 @@
//#define DEBUG_AIO
#define USE_DMA_CDROM
-/* Bits of HD_STATUS */
-#define ERR_STAT 0x01
-#define INDEX_STAT 0x02
-#define ECC_STAT 0x04 /* Corrected error */
-#define DRQ_STAT 0x08
-#define SEEK_STAT 0x10
-#define SRV_STAT 0x10
-#define WRERR_STAT 0x20
-#define READY_STAT 0x40
-#define BUSY_STAT 0x80
-
-/* Bits for HD_ERROR */
-#define MARK_ERR 0x01 /* Bad address mark */
-#define TRK0_ERR 0x02 /* couldn't find track 0 */
-#define ABRT_ERR 0x04 /* Command aborted */
-#define MCR_ERR 0x08 /* media change request */
-#define ID_ERR 0x10 /* ID field not found */
-#define MC_ERR 0x20 /* media changed */
-#define ECC_ERR 0x40 /* Uncorrectable ECC error */
-#define BBD_ERR 0x80 /* pre-EIDE meaning: block
marked bad */
-#define ICRC_ERR 0x80 /* new meaning: CRC error during
transfer */
-
-/* Bits of HD_NSECTOR */
-#define CD 0x01
-#define IO 0x02
-#define REL 0x04
-#define TAG_MASK 0xf8
-
-#define IDE_CMD_RESET 0x04
-#define IDE_CMD_DISABLE_IRQ 0x02
-
-/* ATA/ATAPI Commands pre T13 Spec */
-#define WIN_NOP 0x00
-/*
- * 0x01->0x02 Reserved
- */
-#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code
*/
-/*
- * 0x04->0x07 Reserved
- */
-#define WIN_SRST 0x08 /* ATAPI soft reset command */
-#define WIN_DEVICE_RESET 0x08
-/*
- * 0x09->0x0F Reserved
- */
-#define WIN_RECAL 0x10
-#define WIN_RESTORE WIN_RECAL
-/*
- * 0x10->0x1F Reserved
- */
-#define WIN_READ 0x20 /* 28-Bit */
-#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
-#define WIN_READ_LONG 0x22 /* 28-Bit */
-#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
-#define WIN_READ_EXT 0x24 /* 48-Bit */
-#define WIN_READDMA_EXT 0x25 /* 48-Bit */
-#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
-#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
-/*
- * 0x28
- */
-#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
-/*
- * 0x2A->0x2F Reserved
- */
-#define WIN_WRITE 0x30 /* 28-Bit */
-#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
-#define WIN_WRITE_LONG 0x32 /* 28-Bit */
-#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
-#define WIN_WRITE_EXT 0x34 /* 48-Bit */
-#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
-#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
-#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
-#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors
without erase */
-#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
-/*
- * 0x3A->0x3B Reserved
- */
-#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
-/*
- * 0x3D->0x3F Reserved
- */
-#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
-#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without
retries */
-#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
-/*
- * 0x43->0x4F Reserved
- */
-#define WIN_FORMAT 0x50
-/*
- * 0x51->0x5F Reserved
- */
-#define WIN_INIT 0x60
-/*
- * 0x61->0x5F Reserved
- */
-#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
-#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
-#define WIN_DIAGNOSE 0x90
-#define WIN_SPECIFY 0x91 /* set drive geometry translation
*/
-#define WIN_DOWNLOAD_MICROCODE 0x92
-#define WIN_STANDBYNOW2 0x94
-#define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
-#define WIN_STANDBY2 0x96
-#define WIN_SETIDLE2 0x97
-#define WIN_CHECKPOWERMODE2 0x98
-#define WIN_SLEEPNOW2 0x99
-/*
- * 0x9A VENDOR
- */
-#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
-#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
-#define WIN_QUEUED_SERVICE 0xA2
-#define WIN_SMART 0xB0 /* self-monitoring and reporting */
-#define CFA_ACCESS_METADATA_STORAGE 0xB8
-#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
-#define WIN_MULTREAD 0xC4 /* read sectors using multiple
mode*/
-#define WIN_MULTWRITE 0xC5 /* write sectors using multiple
mode */
-#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
-#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA
transfers */
-#define WIN_READDMA 0xC8 /* read sectors using DMA
transfers */
-#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
-#define WIN_WRITEDMA 0xCA /* write sectors using DMA
transfers */
-#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
-#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA
transfers */
-#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without
erase */
-#define WIN_GETMEDIASTATUS 0xDA
-#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
-#define WIN_POSTBOOT 0xDC
-#define WIN_PREBOOT 0xDD
-#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
-#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives
*/
-#define WIN_STANDBYNOW1 0xE0
-#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
-#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
-#define WIN_SETIDLE1 0xE3
-#define WIN_READ_BUFFER 0xE4 /* force read only 1
sector */
-#define WIN_CHECKPOWERMODE1 0xE5
-#define WIN_SLEEPNOW1 0xE6
-#define WIN_FLUSH_CACHE 0xE7
-#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
-#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
- /* SET_FEATURES 0x22 or 0xDD */
-#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
-#define WIN_IDENTIFY 0xEC /* ask drive to identify itself
*/
-#define WIN_MEDIAEJECT 0xED
-#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
-#define WIN_SETFEATURES 0xEF /* set special drive
features */
-#define EXABYTE_ENABLE_NEST 0xF0
-#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
-#define WIN_SECURITY_SET_PASS 0xF1
-#define WIN_SECURITY_UNLOCK 0xF2
-#define WIN_SECURITY_ERASE_PREPARE 0xF3
-#define WIN_SECURITY_ERASE_UNIT 0xF4
-#define WIN_SECURITY_FREEZE_LOCK 0xF5
-#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
-#define WIN_SECURITY_DISABLE 0xF6
-#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum
address */
-#define WIN_SET_MAX 0xF9
-#define DISABLE_SEAGATE 0xFB
-
-/* set to 1 set disable mult support */
-#define MAX_MULT_SECTORS 16
-
-#define IDE_DMA_BUF_SECTORS 256
-
-#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
-#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
-#endif
-
-/* ATAPI defines */
-
-#define ATAPI_PACKET_SIZE 12
-
-/*********************************************************************
- * Generic Packet commands, MMC commands, and such
- *********************************************************************/
-
- /* The generic packet command opcodes for CD/DVD Logical Units,
- * From Table 57 of the SFF8090 Ver. 3 (Mt. Fuji) draft standard. */
-#define GPCMD_BLANK 0xa1
-#define GPCMD_CLOSE_TRACK 0x5b
-#define GPCMD_FLUSH_CACHE 0x35
-#define GPCMD_FORMAT_UNIT 0x04
-#define GPCMD_GET_CONFIGURATION 0x46
-#define GPCMD_GET_EVENT_STATUS_NOTIFICATION 0x4a
-#define GPCMD_GET_PERFORMANCE 0xac
-#define GPCMD_INQUIRY 0x12
-#define GPCMD_LOAD_UNLOAD 0xa6
-#define GPCMD_MECHANISM_STATUS 0xbd
-#define GPCMD_MODE_SELECT_10 0x55
-#define GPCMD_MODE_SENSE_10 0x5a
-#define GPCMD_PAUSE_RESUME 0x4b
-#define GPCMD_PLAY_AUDIO_10 0x45
-#define GPCMD_PLAY_AUDIO_MSF 0x47
-#define GPCMD_PLAY_AUDIO_TI 0x48
-#define GPCMD_PLAY_CD 0xbc
-#define GPCMD_PREVENT_ALLOW_MEDIUM_REMOVAL 0x1e
-#define GPCMD_READ_10 0x28
-#define GPCMD_READ_12 0xa8
-#define GPCMD_READ_BUFFER 0x3c
-#define GPCMD_READ_BUFFER_CAPACITY 0x5c
-#define GPCMD_READ_CDVD_CAPACITY 0x25
-#define GPCMD_READ_CD 0xbe
-#define GPCMD_READ_CD_MSF 0xb9
-#define GPCMD_READ_DISC_INFO 0x51
-#define GPCMD_READ_DVD_STRUCTURE 0xad
-#define GPCMD_READ_FORMAT_CAPACITIES 0x23
-#define GPCMD_READ_HEADER 0x44
-#define GPCMD_READ_TRACK_RZONE_INFO 0x52
-#define GPCMD_READ_SUBCHANNEL 0x42
-#define GPCMD_READ_TOC_PMA_ATIP 0x43
-#define GPCMD_REPAIR_RZONE_TRACK 0x58
-#define GPCMD_REPORT_KEY 0xa4
-#define GPCMD_REQUEST_SENSE 0x03
-#define GPCMD_RESERVE_RZONE_TRACK 0x53
-#define GPCMD_SEND_CUE_SHEET 0x5d
-#define GPCMD_SCAN 0xba
-#define GPCMD_SEEK 0x2b
-#define GPCMD_SEND_DVD_STRUCTURE 0xbf
-#define GPCMD_SEND_EVENT 0xa2
-#define GPCMD_SEND_KEY 0xa3
-#define GPCMD_SEND_OPC 0x54
-#define GPCMD_SET_READ_AHEAD 0xa7
-#define GPCMD_SET_STREAMING 0xb6
-#define GPCMD_START_STOP_UNIT 0x1b
-#define GPCMD_STOP_PLAY_SCAN 0x4e
-#define GPCMD_TEST_UNIT_READY 0x00
-#define GPCMD_VERIFY_10 0x2f
-#define GPCMD_WRITE_10 0x2a
-#define GPCMD_WRITE_12 0xaa
-#define GPCMD_WRITE_AND_VERIFY_10 0x2e
-#define GPCMD_WRITE_BUFFER 0x3b
-/* This is listed as optional in ATAPI 2.6, but is (curiously)
- * missing from Mt. Fuji, Table 57. It _is_ mentioned in Mt. Fuji
- * Table 377 as an MMC command for SCSi devices though... Most ATAPI
- * drives support it. */
-#define GPCMD_SET_SPEED 0xbb
-/* This seems to be a SCSI specific CD-ROM opcode
- * to play data at track/index */
-#define GPCMD_PLAYAUDIO_TI 0x48
-/*
- * From MS Media Status Notification Support Specification. For
- * older drives only.
- */
-#define GPCMD_GET_MEDIA_STATUS 0xda
-#define GPCMD_MODE_SENSE_6 0x1a
-
-/* Mode page codes for mode sense/set */
-#define GPMODE_VENDOR_PAGE 0x00
-#define GPMODE_R_W_ERROR_PAGE 0x01
-#define GPMODE_WRITE_PARMS_PAGE 0x05
-#define GPMODE_WCACHING_PAGE 0x08
-#define GPMODE_AUDIO_CTL_PAGE 0x0e
-#define GPMODE_POWER_PAGE 0x1a
-#define GPMODE_FAULT_FAIL_PAGE 0x1c
-#define GPMODE_TO_PROTECT_PAGE 0x1d
-#define GPMODE_CAPABILITIES_PAGE 0x2a
-#define GPMODE_ALL_PAGES 0x3f
-/* Not in Mt. Fuji, but in ATAPI 2.6 -- deprecated now in favor
- * of MODE_SENSE_POWER_PAGE */
-#define GPMODE_CDROM_PAGE 0x0d
-
-/*
- * Based on values from <linux/cdrom.h> but extending CD_MINS
- * to the maximum common size allowed by the Orange's Book ATIP
- *
- * 90 and 99 min CDs are also available but using them as the
- * upper limit reduces the effectiveness of the heuristic to
- * detect DVDs burned to less than 25% of their maximum capacity
- */
-
-/* Some generally useful CD-ROM information */
-#define CD_MINS 80 /* max. minutes per CD */
-#define CD_SECS 60 /* seconds per minute */
-#define CD_FRAMES 75 /* frames per second */
-#define CD_SYNC_SIZE 12 /* 12 sync bytes per raw data frame */
-#define CD_MSF_OFFSET 150 /* MSF numbering offset of first frame */
-#define CD_CHUNK_SIZE 24 /* lowest-level "data bytes piece" */
-#define CD_NUM_OF_CHUNKS 98 /* chunks per frame */
-#define CD_FRAMESIZE_SUB 96 /* subchannel data "frame" size */
-#define CD_HEAD_SIZE 4 /* header (address) bytes per raw data frame */
-#define CD_SUBHEAD_SIZE 8 /* subheader bytes per raw XA data frame */
-#define CD_EDC_SIZE 4 /* bytes EDC per most raw data frame types */
-#define CD_ZERO_SIZE 8 /* bytes zero per yellow book mode 1 frame */
-#define CD_ECC_SIZE 276 /* bytes ECC per most raw data frame types */
-#define CD_FRAMESIZE 2048 /* bytes per frame, "cooked" mode */
-#define CD_FRAMESIZE_RAW 2352 /* bytes per frame, "raw" mode */
-#define CD_FRAMESIZE_RAWER 2646 /* The maximum possible returned bytes */
-/* most drives don't deliver everything: */
-#define CD_FRAMESIZE_RAW1 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE) /*2340*/
-#define CD_FRAMESIZE_RAW0 (CD_FRAMESIZE_RAW-CD_SYNC_SIZE-CD_HEAD_SIZE) /*2336*/
-
-#define CD_MAX_BYTES (CD_MINS * CD_SECS * CD_FRAMES * CD_FRAMESIZE)
-#define CD_MAX_SECTORS (CD_MAX_BYTES / 512)
-
-/*
- * The MMC values are not IDE specific and might need to be moved
- * to a common header if they are also needed for the SCSI emulation
- */
-
-/* Profile list from MMC-6 revision 1 table 91 */
-#define MMC_PROFILE_NONE 0x0000
-#define MMC_PROFILE_CD_ROM 0x0008
-#define MMC_PROFILE_CD_R 0x0009
-#define MMC_PROFILE_CD_RW 0x000A
-#define MMC_PROFILE_DVD_ROM 0x0010
-#define MMC_PROFILE_DVD_R_SR 0x0011
-#define MMC_PROFILE_DVD_RAM 0x0012
-#define MMC_PROFILE_DVD_RW_RO 0x0013
-#define MMC_PROFILE_DVD_RW_SR 0x0014
-#define MMC_PROFILE_DVD_R_DL_SR 0x0015
-#define MMC_PROFILE_DVD_R_DL_JR 0x0016
-#define MMC_PROFILE_DVD_RW_DL 0x0017
-#define MMC_PROFILE_DVD_DDR 0x0018
-#define MMC_PROFILE_DVD_PLUS_RW 0x001A
-#define MMC_PROFILE_DVD_PLUS_R 0x001B
-#define MMC_PROFILE_DVD_PLUS_RW_DL 0x002A
-#define MMC_PROFILE_DVD_PLUS_R_DL 0x002B
-#define MMC_PROFILE_BD_ROM 0x0040
-#define MMC_PROFILE_BD_R_SRM 0x0041
-#define MMC_PROFILE_BD_R_RRM 0x0042
-#define MMC_PROFILE_BD_RE 0x0043
-#define MMC_PROFILE_HDDVD_ROM 0x0050
-#define MMC_PROFILE_HDDVD_R 0x0051
-#define MMC_PROFILE_HDDVD_RAM 0x0052
-#define MMC_PROFILE_HDDVD_RW 0x0053
-#define MMC_PROFILE_HDDVD_R_DL 0x0058
-#define MMC_PROFILE_HDDVD_RW_DL 0x005A
-#define MMC_PROFILE_INVALID 0xFFFF
-
-
-#define ATAPI_INT_REASON_CD 0x01 /* 0 = data transfer */
-#define ATAPI_INT_REASON_IO 0x02 /* 1 = transfer to the host */
-#define ATAPI_INT_REASON_REL 0x04
-#define ATAPI_INT_REASON_TAG 0xf8
-
-/* same constants as bochs */
-#define ASC_NONE 0x00
-#define ASC_READ_ERROR 0x11
-#define ASC_ILLEGAL_OPCODE 0x20
-#define ASC_LOGICAL_BLOCK_OOR 0x21
-#define ASC_INV_FIELD_IN_CMD_PACKET 0x24
-#define ASC_MEDIUM_MAY_HAVE_CHANGED 0x28
-#define ASC_INCOMPATIBLE_FORMAT 0x30
-#define ASC_MEDIUM_NOT_PRESENT 0x3a
-#define ASC_SAVING_PARAMETERS_NOT_SUPPORTED 0x39
-#define ASC_MEDIA_REMOVAL_PREVENTED 0x53
-
-#define CFA_NO_ERROR 0x00
-#define CFA_MISC_ERROR 0x09
-#define CFA_INVALID_COMMAND 0x20
-#define CFA_INVALID_ADDRESS 0x21
-#define CFA_ADDRESS_OVERFLOW 0x2f
-
-/* Sense keys */
-#define SENSE_NONE 0
-#define SENSE_RECOVERED_ERROR 1
-#define SENSE_NOT_READY 2
-#define SENSE_MEDIUM_ERROR 3
-#define SENSE_HARDWARE_ERROR 4
-#define SENSE_ILLEGAL_REQUEST 5
-#define SENSE_UNIT_ATTENTION 6
-#define SENSE_DATA_PROTECT 7
-#define SENSE_BLANK_CHECK 8
-#define SENSE_VENDOR_SPECIFIC 9
-#define SENSE_COPY_ABORTED 10
-#define SENSE_ABORTED_COMMAND 11
-#define SENSE_VOLUME_OVERFLOW 13
-#define SENSE_MISCOMPARE 14
-
-#define IO_BUFFER_MAX_SIZE (IDE_DMA_BUF_SECTORS * 512 + 4)
-
-struct IDEState;
-
-typedef void EndTransferFunc(struct IDEState *);
-
-/* NOTE: IDEState represents in fact one drive */
-typedef struct IDEState {
- /* ide config */
- int is_cdrom;
- int is_cf;
- int cylinders, heads, sectors;
- int64_t nb_sectors;
- int mult_sectors;
- int identify_set;
- uint16_t identify_data[256];
- qemu_irq irq;
- PCIDevice *pci_dev;
- struct BMDMAState *bmdma;
- int drive_serial;
- char drive_serial_str[21];
- /* ide regs */
- uint8_t feature;
- uint8_t error;
- uint32_t nsector;
- uint8_t sector;
- uint8_t lcyl;
- uint8_t hcyl;
- /* other part of tf for lba48 support */
- uint8_t hob_feature;
- uint8_t hob_nsector;
- uint8_t hob_sector;
- uint8_t hob_lcyl;
- uint8_t hob_hcyl;
-
- uint8_t select;
- uint8_t status;
-
- /* 0x3f6 command, only meaningful for drive 0 */
- uint8_t cmd;
- /* set for lba48 access */
- uint8_t lba48;
- /* depends on bit 4 in select, only meaningful for drive 0 */
- struct IDEState *cur_drive;
- BlockDriverState *bs;
- /* ATAPI specific */
- uint8_t sense_key;
- uint8_t asc;
- int packet_transfer_size;
- int elementary_transfer_size;
- int io_buffer_index;
- int lba;
- int cd_sector_size;
- int atapi_dma; /* true if dma is requested for the packet cmd */
- /* ATA DMA state */
- int io_buffer_size;
- QEMUSGList sg;
- /* PIO transfer handling */
- int req_nb_sectors; /* number of sectors per interrupt */
- EndTransferFunc *end_transfer_func;
- uint8_t *data_ptr;
- uint8_t *data_end;
- uint8_t *io_buffer;
- QEMUTimer *sector_write_timer; /* only used for win2k install hack */
- uint32_t irq_count; /* counts IRQs when using win2k install hack */
- /* CF-ATA extended error */
- uint8_t ext_error;
- /* CF-ATA metadata storage */
- uint32_t mdata_size;
- uint8_t *mdata_storage;
- int media_changed;
- /* for pmac */
- int is_read;
-} IDEState;
-
/* XXX: DVDs that could fit on a CD will be reported as a CD */
static inline int media_present(IDEState *s)
{
@@ -504,59 +60,9 @@ static inline int media_is_cd(IDEState *s)
return (media_present(s) && s->nb_sectors <= CD_MAX_SECTORS);
}
-#define BM_STATUS_DMAING 0x01
-#define BM_STATUS_ERROR 0x02
-#define BM_STATUS_INT 0x04
-#define BM_STATUS_DMA_RETRY 0x08
-#define BM_STATUS_PIO_RETRY 0x10
-
-#define BM_CMD_START 0x01
-#define BM_CMD_READ 0x08
-
-#define IDE_TYPE_PIIX3 0
-#define IDE_TYPE_CMD646 1
-#define IDE_TYPE_PIIX4 2
-
-/* CMD646 specific */
-#define MRDMODE 0x71
-#define MRDMODE_INTR_CH0 0x04
-#define MRDMODE_INTR_CH1 0x08
-#define MRDMODE_BLK_CH0 0x10
-#define MRDMODE_BLK_CH1 0x20
-#define UDIDETCR0 0x73
-#define UDIDETCR1 0x7B
-
-typedef struct BMDMAState {
- uint8_t cmd;
- uint8_t status;
- uint32_t addr;
-
- struct PCIIDEState *pci_dev;
- /* current transfer state */
- uint32_t cur_addr;
- uint32_t cur_prd_last;
- uint32_t cur_prd_addr;
- uint32_t cur_prd_len;
- IDEState *ide_if;
- BlockDriverCompletionFunc *dma_cb;
- BlockDriverAIOCB *aiocb;
- struct iovec iov;
- QEMUIOVector qiov;
- int64_t sector_num;
- uint32_t nsector;
- QEMUBH *bh;
-} BMDMAState;
-
-typedef struct PCIIDEState {
- PCIDevice dev;
- IDEState ide_if[4];
- BMDMAState bmdma[2];
- int type; /* see IDE_TYPE_xxx */
-} PCIIDEState;
-
-static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
static void ide_dma_restart(IDEState *s);
static void ide_atapi_cmd_read_dma_cb(void *opaque, int ret);
+static void ide_atapi_cmd_error(IDEState *s, int sense_key, int asc);
static void padstr(char *str, const char *src, int len)
{
@@ -655,7 +161,7 @@ static void ide_identify(IDEState *s)
s->identify_set = 1;
}
-static void ide_atapi_identify(IDEState *s)
+void ide_atapi_identify(IDEState *s)
{
uint16_t *p;
@@ -801,7 +307,7 @@ static inline void ide_dma_submit_check(IDEState *s,
dma_cb(bm, -1);
}
-static inline void ide_set_irq(IDEState *s)
+void ide_set_irq(IDEState *s)
{
BMDMAState *bm = s->bmdma;
if (!(s->cmd & IDE_CMD_DISABLE_IRQ)) {
@@ -813,8 +319,8 @@ static inline void ide_set_irq(IDEState *s)
}
/* prepare data transfer and tell what to do after */
-static void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
- EndTransferFunc *end_transfer_func)
+void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
+ EndTransferFunc *end_transfer_func)
{
s->end_transfer_func = end_transfer_func;
s->data_ptr = buf;
@@ -823,7 +329,7 @@ static void ide_transfer_start(IDEState *s, uint8_t *buf,
int size,
s->status |= DRQ_STAT;
}
-static void ide_transfer_stop(IDEState *s)
+void ide_transfer_stop(IDEState *s)
{
s->end_transfer_func = ide_transfer_stop;
s->data_ptr = s->io_buffer;
@@ -994,7 +500,7 @@ static int ide_handle_write_error(IDEState *s, int error,
int op)
}
/* return 0 if buffer completed */
-static int dma_buf_rw(BMDMAState *bm, int is_write)
+int dma_buf_rw(BMDMAState *bm, int is_write)
{
IDEState *s = bm->ide_if;
struct {
@@ -1237,7 +743,7 @@ static void ide_sector_write_dma(IDEState *s)
ide_dma_start(s, ide_write_dma_cb);
}
-static void ide_atapi_cmd_ok(IDEState *s)
+void ide_atapi_cmd_ok(IDEState *s)
{
s->error = 0;
s->status = READY_STAT | SEEK_STAT;
@@ -1269,30 +775,6 @@ static void ide_atapi_cmd_check_status(IDEState *s)
ide_set_irq(s);
}
-static inline void cpu_to_ube16(uint8_t *buf, int val)
-{
- buf[0] = val >> 8;
- buf[1] = val & 0xff;
-}
-
-static inline void cpu_to_ube32(uint8_t *buf, unsigned int val)
-{
- buf[0] = val >> 24;
- buf[1] = val >> 16;
- buf[2] = val >> 8;
- buf[3] = val & 0xff;
-}
-
-static inline int ube16_to_cpu(const uint8_t *buf)
-{
- return (buf[0] << 8) | buf[1];
-}
-
-static inline int ube32_to_cpu(const uint8_t *buf)
-{
- return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
-}
-
static void lba_to_msf(uint8_t *buf, int lba)
{
lba += 150;
@@ -1340,7 +822,7 @@ static int cd_read_sector(BlockDriverState *bs, int lba,
uint8_t *buf,
return ret;
}
-static void ide_atapi_io_error(IDEState *s, int ret)
+void ide_atapi_io_error(IDEState *s, int ret)
{
/* XXX: handle more errors */
if (ret == -ENOMEDIUM) {
@@ -1432,7 +914,7 @@ static void ide_atapi_cmd_reply_end(IDEState *s)
}
/* send a reply of 'size' bytes in s->io_buffer to an ATAPI command */
-static void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
+void ide_atapi_cmd_reply(IDEState *s, int size, int max_size)
{
if (size > max_size)
size = max_size;
@@ -3003,7 +2485,7 @@ static void ide_map(PCIDevice *pci_dev, int region_num,
}
}
-static void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
+void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb)
{
BMDMAState *bm = s->bmdma;
if(!bm)
diff --git a/hw/ide.h b/hw/ide.h
new file mode 100644
index 0000000..064e2d3
--- /dev/null
+++ b/hw/ide.h
@@ -0,0 +1,377 @@
+/*
+ * QEMU IDE disk and CD/DVD-ROM Emulator definitions
+ *
+ * Copyright (c) 2009 Alexandre Bique
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to
deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+ * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef IDE_H
+#define IDE_H
+
+#include "hw.h"
+#include "pc.h"
+#include "pci.h"
+#include "scsi-disk.h"
+#include "pcmcia.h"
+#include "block.h"
+#include "block_int.h"
+#include "qemu-timer.h"
+#include "sysemu.h"
+#include "ppc_mac.h"
+#include "mac_dbdma.h"
+#include "sh.h"
+#include "dma.h"
+#include "atapi-defines.h"
+
+#include <stdint.h>
+
+/* Bits of HD_STATUS */
+#define ERR_STAT 0x01
+#define INDEX_STAT 0x02
+#define ECC_STAT 0x04 /* Corrected error */
+#define DRQ_STAT 0x08
+#define SEEK_STAT 0x10
+#define SRV_STAT 0x10
+#define WRERR_STAT 0x20
+#define READY_STAT 0x40
+#define BUSY_STAT 0x80
+
+/* Bits for HD_ERROR */
+#define MARK_ERR 0x01 /* Bad address mark */
+#define TRK0_ERR 0x02 /* couldn't find track 0 */
+#define ABRT_ERR 0x04 /* Command aborted */
+#define MCR_ERR 0x08 /* media change request */
+#define ID_ERR 0x10 /* ID field not found */
+#define MC_ERR 0x20 /* media changed */
+#define ECC_ERR 0x40 /* Uncorrectable ECC error */
+#define BBD_ERR 0x80 /* pre-EIDE meaning: block
marked bad */
+#define ICRC_ERR 0x80 /* new meaning: CRC error during
transfer */
+
+/* Bits of HD_NSECTOR */
+#define CD 0x01
+#define IO 0x02
+#define REL 0x04
+#define TAG_MASK 0xf8
+
+#define IDE_CMD_RESET 0x04
+#define IDE_CMD_DISABLE_IRQ 0x02
+
+/* ATA/ATAPI Commands pre T13 Spec */
+#define WIN_NOP 0x00
+/*
+ * 0x01->0x02 Reserved
+ */
+#define CFA_REQ_EXT_ERROR_CODE 0x03 /* CFA Request Extended Error Code
*/
+/*
+ * 0x04->0x07 Reserved
+ */
+#define WIN_SRST 0x08 /* ATAPI soft reset command */
+#define WIN_DEVICE_RESET 0x08
+/*
+ * 0x09->0x0F Reserved
+ */
+#define WIN_RECAL 0x10
+#define WIN_RESTORE WIN_RECAL
+/*
+ * 0x10->0x1F Reserved
+ */
+#define WIN_READ 0x20 /* 28-Bit */
+#define WIN_READ_ONCE 0x21 /* 28-Bit without retries */
+#define WIN_READ_LONG 0x22 /* 28-Bit */
+#define WIN_READ_LONG_ONCE 0x23 /* 28-Bit without retries */
+#define WIN_READ_EXT 0x24 /* 48-Bit */
+#define WIN_READDMA_EXT 0x25 /* 48-Bit */
+#define WIN_READDMA_QUEUED_EXT 0x26 /* 48-Bit */
+#define WIN_READ_NATIVE_MAX_EXT 0x27 /* 48-Bit */
+/*
+ * 0x28
+ */
+#define WIN_MULTREAD_EXT 0x29 /* 48-Bit */
+/*
+ * 0x2A->0x2F Reserved
+ */
+#define WIN_WRITE 0x30 /* 28-Bit */
+#define WIN_WRITE_ONCE 0x31 /* 28-Bit without retries */
+#define WIN_WRITE_LONG 0x32 /* 28-Bit */
+#define WIN_WRITE_LONG_ONCE 0x33 /* 28-Bit without retries */
+#define WIN_WRITE_EXT 0x34 /* 48-Bit */
+#define WIN_WRITEDMA_EXT 0x35 /* 48-Bit */
+#define WIN_WRITEDMA_QUEUED_EXT 0x36 /* 48-Bit */
+#define WIN_SET_MAX_EXT 0x37 /* 48-Bit */
+#define CFA_WRITE_SECT_WO_ERASE 0x38 /* CFA Write Sectors
without erase */
+#define WIN_MULTWRITE_EXT 0x39 /* 48-Bit */
+/*
+ * 0x3A->0x3B Reserved
+ */
+#define WIN_WRITE_VERIFY 0x3C /* 28-Bit */
+/*
+ * 0x3D->0x3F Reserved
+ */
+#define WIN_VERIFY 0x40 /* 28-Bit - Read Verify Sectors */
+#define WIN_VERIFY_ONCE 0x41 /* 28-Bit - without
retries */
+#define WIN_VERIFY_EXT 0x42 /* 48-Bit */
+/*
+ * 0x43->0x4F Reserved
+ */
+#define WIN_FORMAT 0x50
+/*
+ * 0x51->0x5F Reserved
+ */
+#define WIN_INIT 0x60
+/*
+ * 0x61->0x5F Reserved
+ */
+#define WIN_SEEK 0x70 /* 0x70-0x7F Reserved */
+#define CFA_TRANSLATE_SECTOR 0x87 /* CFA Translate Sector */
+#define WIN_DIAGNOSE 0x90
+#define WIN_SPECIFY 0x91 /* set drive geometry translation
*/
+#define WIN_DOWNLOAD_MICROCODE 0x92
+#define WIN_STANDBYNOW2 0x94
+#define CFA_IDLEIMMEDIATE 0x95 /* force drive to become "ready" */
+#define WIN_STANDBY2 0x96
+#define WIN_SETIDLE2 0x97
+#define WIN_CHECKPOWERMODE2 0x98
+#define WIN_SLEEPNOW2 0x99
+/*
+ * 0x9A VENDOR
+ */
+#define WIN_PACKETCMD 0xA0 /* Send a packet command. */
+#define WIN_PIDENTIFY 0xA1 /* identify ATAPI device */
+#define WIN_QUEUED_SERVICE 0xA2
+#define WIN_SMART 0xB0 /* self-monitoring and reporting */
+#define CFA_ACCESS_METADATA_STORAGE 0xB8
+#define CFA_ERASE_SECTORS 0xC0 /* microdrives implement as NOP */
+#define WIN_MULTREAD 0xC4 /* read sectors using multiple
mode*/
+#define WIN_MULTWRITE 0xC5 /* write sectors using multiple
mode */
+#define WIN_SETMULT 0xC6 /* enable/disable multiple mode */
+#define WIN_READDMA_QUEUED 0xC7 /* read sectors using Queued DMA
transfers */
+#define WIN_READDMA 0xC8 /* read sectors using DMA
transfers */
+#define WIN_READDMA_ONCE 0xC9 /* 28-Bit - without retries */
+#define WIN_WRITEDMA 0xCA /* write sectors using DMA
transfers */
+#define WIN_WRITEDMA_ONCE 0xCB /* 28-Bit - without retries */
+#define WIN_WRITEDMA_QUEUED 0xCC /* write sectors using Queued DMA
transfers */
+#define CFA_WRITE_MULTI_WO_ERASE 0xCD /* CFA Write multiple without
erase */
+#define WIN_GETMEDIASTATUS 0xDA
+#define WIN_ACKMEDIACHANGE 0xDB /* ATA-1, ATA-2 vendor */
+#define WIN_POSTBOOT 0xDC
+#define WIN_PREBOOT 0xDD
+#define WIN_DOORLOCK 0xDE /* lock door on removable drives */
+#define WIN_DOORUNLOCK 0xDF /* unlock door on removable drives
*/
+#define WIN_STANDBYNOW1 0xE0
+#define WIN_IDLEIMMEDIATE 0xE1 /* force drive to become "ready" */
+#define WIN_STANDBY 0xE2 /* Set device in Standby Mode */
+#define WIN_SETIDLE1 0xE3
+#define WIN_READ_BUFFER 0xE4 /* force read only 1
sector */
+#define WIN_CHECKPOWERMODE1 0xE5
+#define WIN_SLEEPNOW1 0xE6
+#define WIN_FLUSH_CACHE 0xE7
+#define WIN_WRITE_BUFFER 0xE8 /* force write only 1 sector */
+#define WIN_WRITE_SAME 0xE9 /* read ata-2 to use */
+ /* SET_FEATURES 0x22 or 0xDD */
+#define WIN_FLUSH_CACHE_EXT 0xEA /* 48-Bit */
+#define WIN_IDENTIFY 0xEC /* ask drive to identify itself
*/
+#define WIN_MEDIAEJECT 0xED
+#define WIN_IDENTIFY_DMA 0xEE /* same as WIN_IDENTIFY, but DMA */
+#define WIN_SETFEATURES 0xEF /* set special drive
features */
+#define EXABYTE_ENABLE_NEST 0xF0
+#define IBM_SENSE_CONDITION 0xF0 /* measure disk temperature */
+#define WIN_SECURITY_SET_PASS 0xF1
+#define WIN_SECURITY_UNLOCK 0xF2
+#define WIN_SECURITY_ERASE_PREPARE 0xF3
+#define WIN_SECURITY_ERASE_UNIT 0xF4
+#define WIN_SECURITY_FREEZE_LOCK 0xF5
+#define CFA_WEAR_LEVEL 0xF5 /* microdrives implement as NOP */
+#define WIN_SECURITY_DISABLE 0xF6
+#define WIN_READ_NATIVE_MAX 0xF8 /* return the native maximum
address */
+#define WIN_SET_MAX 0xF9
+#define DISABLE_SEAGATE 0xFB
+
+/* set to 1 set disable mult support */
+#define MAX_MULT_SECTORS 16
+
+#define IDE_DMA_BUF_SECTORS 256
+
+#if (IDE_DMA_BUF_SECTORS < MAX_MULT_SECTORS)
+#error "IDE_DMA_BUF_SECTORS must be bigger or equal to MAX_MULT_SECTORS"
+#endif
+
+#define IO_BUFFER_MAX_SIZE (IDE_DMA_BUF_SECTORS * 512 + 4)
+
+struct IDEState;
+
+typedef void EndTransferFunc(struct IDEState *);
+
+/* NOTE: IDEState represents in fact one drive */
+typedef struct IDEState {
+ /* ide config */
+ int is_cdrom;
+ int is_cf;
+ int cylinders, heads, sectors;
+ int64_t nb_sectors;
+ int mult_sectors;
+ int identify_set;
+ uint16_t identify_data[256];
+ qemu_irq irq;
+ PCIDevice *pci_dev;
+ struct BMDMAState *bmdma;
+ int drive_serial;
+ char drive_serial_str[21];
+ /* ide regs */
+ uint8_t feature;
+ uint8_t error;
+ uint32_t nsector;
+ uint8_t sector;
+ uint8_t lcyl;
+ uint8_t hcyl;
+ /* other part of tf for lba48 support */
+ uint8_t hob_feature;
+ uint8_t hob_nsector;
+ uint8_t hob_sector;
+ uint8_t hob_lcyl;
+ uint8_t hob_hcyl;
+
+ uint8_t select;
+ uint8_t status;
+
+ /* 0x3f6 command, only meaningful for drive 0 */
+ uint8_t cmd;
+ /* set for lba48 access */
+ uint8_t lba48;
+ /* depends on bit 4 in select, only meaningful for drive 0 */
+ struct IDEState *cur_drive;
+ BlockDriverState *bs;
+ /* ATAPI specific */
+ uint8_t sense_key;
+ uint8_t asc;
+ int packet_transfer_size;
+ int elementary_transfer_size;
+ int io_buffer_index;
+ int lba;
+ int cd_sector_size;
+ int atapi_dma; /* true if dma is requested for the packet cmd */
+ /* ATA DMA state */
+ int io_buffer_size;
+ QEMUSGList sg;
+ /* PIO transfer handling */
+ int req_nb_sectors; /* number of sectors per interrupt */
+ EndTransferFunc *end_transfer_func;
+ uint8_t *data_ptr;
+ uint8_t *data_end;
+ uint8_t *io_buffer;
+ QEMUTimer *sector_write_timer; /* only used for win2k install hack */
+ uint32_t irq_count; /* counts IRQs when using win2k install hack */
+ /* CF-ATA extended error */
+ uint8_t ext_error;
+ /* CF-ATA metadata storage */
+ uint32_t mdata_size;
+ uint8_t *mdata_storage;
+ int media_changed;
+ /* for pmac */
+ int is_read;
+} IDEState;
+
+#define BM_STATUS_DMAING 0x01
+#define BM_STATUS_ERROR 0x02
+#define BM_STATUS_INT 0x04
+#define BM_STATUS_DMA_RETRY 0x08
+#define BM_STATUS_PIO_RETRY 0x10
+
+#define BM_CMD_START 0x01
+#define BM_CMD_READ 0x08
+
+#define IDE_TYPE_PIIX3 0
+#define IDE_TYPE_CMD646 1
+#define IDE_TYPE_PIIX4 2
+
+/* CMD646 specific */
+#define MRDMODE 0x71
+#define MRDMODE_INTR_CH0 0x04
+#define MRDMODE_INTR_CH1 0x08
+#define MRDMODE_BLK_CH0 0x10
+#define MRDMODE_BLK_CH1 0x20
+#define UDIDETCR0 0x73
+#define UDIDETCR1 0x7B
+
+typedef struct BMDMAState {
+ uint8_t cmd;
+ uint8_t status;
+ uint32_t addr;
+
+ struct PCIIDEState *pci_dev;
+ /* current transfer state */
+ uint32_t cur_addr;
+ uint32_t cur_prd_last;
+ uint32_t cur_prd_addr;
+ uint32_t cur_prd_len;
+ IDEState *ide_if;
+ BlockDriverCompletionFunc *dma_cb;
+ BlockDriverAIOCB *aiocb;
+ struct iovec iov;
+ QEMUIOVector qiov;
+ int64_t sector_num;
+ uint32_t nsector;
+ QEMUBH *bh;
+} BMDMAState;
+
+typedef struct PCIIDEState {
+ PCIDevice dev;
+ IDEState ide_if[4];
+ BMDMAState bmdma[2];
+ int type; /* see IDE_TYPE_xxx */
+} PCIIDEState;
+
+void ide_set_irq(IDEState *s);
+void ide_atapi_cmd_ok(IDEState *s);
+void ide_transfer_stop(IDEState *s);
+void ide_atapi_io_error(IDEState *s, int ret);
+int dma_buf_rw(BMDMAState *bm, int is_write);
+void ide_atapi_identify(IDEState *s);
+void ide_dma_start(IDEState *s, BlockDriverCompletionFunc *dma_cb);
+void ide_transfer_start(IDEState *s, uint8_t *buf, int size,
+ EndTransferFunc *end_transfer_func);
+void ide_atapi_cmd_reply(IDEState *s, int size, int max_size);
+
+static inline void cpu_to_ube16(uint8_t *buf, int val)
+{
+ buf[0] = val >> 8;
+ buf[1] = val & 0xff;
+}
+
+static inline void cpu_to_ube32(uint8_t *buf, unsigned int val)
+{
+ buf[0] = val >> 24;
+ buf[1] = val >> 16;
+ buf[2] = val >> 8;
+ buf[3] = val & 0xff;
+}
+
+static inline int ube16_to_cpu(const uint8_t *buf)
+{
+ return (buf[0] << 8) | buf[1];
+}
+
+static inline int ube32_to_cpu(const uint8_t *buf)
+{
+ return (buf[0] << 24) | (buf[1] << 16) | (buf[2] << 8) | buf[3];
+}
+
+
+#endif /* !IDE_H */
+
--
1.6.4
Re: [Qemu-devel] ATAPI pass throug v4, Anthony Liguori, 2009/08/10