[Qemu-devel] [PATCH] Documentation: Add documentation for -chardev

[Matthew Booth]

Adds documentation for all -chardev backends.

Signed-off-by: Matthew Booth <address@hidden>
---
 qemu-options.hx |  234 ++++++++++++++++++++++++++++++++++++++++++++++++++++++-
 1 files changed, 230 insertions(+), 4 deletions(-)

diff --git a/qemu-options.hx b/qemu-options.hx
index d78b738..7922191 100644
--- a/qemu-options.hx
+++ b/qemu-options.hx
@@ -1085,8 +1085,237 @@ is activated if no @option{-net} options are provided.
 @end table
 ETEXI
 
+DEFHEADING()
+
+DEFHEADING(Character device options:)
+
+DEF("chardev", HAS_ARG, QEMU_OPTION_chardev,
+    "-chardev null,id=id\n"
+    "-chardev 
socket,id=id[,host=host],port=host[,to=to][,ipv4][,ipv6][,nodelay]\n"
+    "         [,server][,nowait][,telnet] (tcp)\n"
+    "-chardev socket,id=id,path=path[,server][,nowait][,telnet] (unix)\n"
+    "-chardev udp,id=id[,host=host],port=port[,localaddr=localaddr]\n"
+    "         [,localport=localport][,ipv4][,ipv6]\n"
+    "-chardev msmouse,id=id\n"
+    "-chardev 
vc,id=id[[,width=width][,height=height]][[,cols=cols][,rows=rows]]\n"
+    "-chardev file,id=id,path=path\n"
+    "-chardev pipe,id=id,path=path\n"
+#ifdef _WIN32
+    "-chardev console,id=id\n"
+    "-chardev serial,id=id,path=path\n"
+#else
+    "-chardev pty,id=id\n"
+    "-chardev stdio,id=id\n"
+#endif
+#ifdef CONFIG_BRLAPI
+    "-chardev braille,id=id\n"
+#endif
+#if defined(__linux__) || defined(__sun__) || defined(__FreeBSD__) \
+        || defined(__NetBSD__) || defined(__OpenBSD__) || 
defined(__DragonFly__)
+    "-chardev tty,id=id,path=path\n"
+#endif
+#if defined(__linux__) || defined(__FreeBSD__) || defined(__DragonFly__)
+    "-chardev parport,id=id,path=path\n"
+#endif
+)
+
+STEXI
+
+The general form of a character device option is:
address@hidden @option
+
address@hidden -chardev @var{backend} ,address@hidden [,@var{options}]
+
+Backend is one of:
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden,
address@hidden
+The specific backend will determine the applicable options.
+
+All devices must have an id, which can be any string up to 127 characters long.
+It is used to uniquely identify this device in other command line directives.
+
+Options to each backend are described below.
+
address@hidden -chardev null ,address@hidden
+A void device. This device will not emit any data, and will drop any data it
+receives. The null backend does not take any options.
+
address@hidden -chardev socket ,address@hidden address@hidden options} or 
@var{unix options}] [,server] [,nowait] [,telnet]
+
+Create a two-way stream socket, which can be either a TCP or a unix socket. A
+unix socket will be created if @option{path} is specified. Behaviour is
+undefined if TCP options are specified for a unix socket.
+
address@hidden specifies that the socket shall be a listening socket.
+
address@hidden specifies that QEMU should not block waiting for a client to
+connect to a listening socket.
+
address@hidden specifies that traffic on the socket should interpret telnet
+escape sequences.
+
+TCP and unix socket options are given below:
+
address@hidden @option
+
address@hidden TCP options: address@hidden [,address@hidden [,address@hidden 
[,ipv4] [,ipv6] [,nodelay]
+
address@hidden for a listening socket specifies the local address to be bound.
+For a connecting socket species the remote host to connect to. @option{host} is
+optional for listening sockets. If not specified it defaults to @code{0.0.0.0}.
+
address@hidden for a listening socket specifies the local port to be bound. For 
a
+connecting socket specifies the port on the remote host to connect to.
address@hidden can be given as either a port number or a service name.
address@hidden is required.
+
address@hidden is only relevant to listening sockets. If it is specified, and
address@hidden cannot be bound, QEMU will attempt to bind to subsequent ports up
+to and including @option{to} until it succeeds. @option{to} must be specified
+as a port number.
+
address@hidden and @option{ipv6} specify that either IPv4 or IPv6 must be used.
+If neither is specified the socket may use either protocol.
+
address@hidden disables the Nagle algorithm.
+
address@hidden unix options: address@hidden
+
address@hidden specifies the local path of the unix socket. @option{path} is
+required.
+
address@hidden table
+
address@hidden -chardev udp ,address@hidden [,address@hidden ,address@hidden 
[,address@hidden [,address@hidden [,ipv4] [,ipv6]
+
+Sends all traffic from the guest to a remote host over UDP.
+
address@hidden specifies the remote host to connect to. If not specified it
+defaults to @code{localhost}.
+
address@hidden specifies the port on the remote host to connect to. 
@option{port}
+is required.
+
address@hidden specifies the local address to bind to. If not specified it
+defaults to @code{0.0.0.0}.
+
address@hidden specifies the local port to bind to. If not specified any
+available local port will be used.
+
address@hidden and @option{ipv6} specify that either IPv4 or IPv6 must be used.
+If neither is specified the device may use either protocol.
+
address@hidden -chardev msmouse ,address@hidden
+
+Forward QEMU's emulated msmouse events to the guest. @option{msmouse} does not
+take any options.
+
address@hidden -chardev vc ,address@hidden [[,address@hidden [,address@hidden 
[[,address@hidden [,address@hidden
+
+Connect to a QEMU text console. @option{vc} may optionally be given a specific
+size.
+
address@hidden and @option{height} specify the width and height respectively of
+the console, in pixels.
+
address@hidden and @option{rows} specify that the console be sized to fit a text
+console with the given dimensions.
+
address@hidden -chardev file ,address@hidden ,address@hidden
+
+Log all traffic received from the guest to a file.
+
address@hidden specifies the path of the file to be opened. This file will be
+created if it does not already exist, and overwritten if it does. @option{path}
+is required.
+
address@hidden -chardev pipe ,address@hidden ,address@hidden
+
+Create a two-way connection to the guest. The behaviour differs slightly 
between
+Windows hosts and other hosts:
+
+On Windows, a single duplex pipe will be created at
address@hidden@option{path}}.
+
+On other hosts, 2 pipes will be created called @address@hidden and
address@hidden@option{path}.out}. Data written to @address@hidden will be
+received by the guest. Data written by the guest can be read from
address@hidden@option{path}.out}. QEMU will not create these fifos, and 
requires them to
+be present.
+
address@hidden forms part of the pipe path as described above. @option{path} is
+required.
+
address@hidden -chardev console ,address@hidden
+
+Send traffic from the guest to QEMU's standard output. @option{console} does 
not
+take any options.
+
address@hidden is only available on Windows hosts.
+
address@hidden -chardev serial ,address@hidden ,address@hidden
+
+Send traffic from the guest to a serial device on the host.
+
address@hidden is
+only available on Windows hosts.
+
address@hidden specifies the name of the serial device to open.
+
address@hidden -chardev pty ,address@hidden
+
+Create a new pseudo-terminal on the host and connect to it. @option{pty} does
+not take any options.
+
address@hidden is not available on Windows hosts.
+
address@hidden -chardev stdio ,address@hidden
+Connect to standard input and standard output of the qemu process.
address@hidden does not take any options. @option{stdio} is not available on
+Windows hosts.
+
address@hidden -chardev braille ,address@hidden
+
+Connect to a local BrlAPI server. @option{braille} does not take any options.
+
address@hidden -chardev tty ,address@hidden ,address@hidden
+
+Connect to a local tty device.
+
address@hidden is only available on Linux, Sun, FreeBSD, NetBSD, OpenBSD and
+DragonFlyBSD hosts.
+
address@hidden specifies the path to the tty. @option{path} is required.
+
address@hidden -chardev parport ,address@hidden ,address@hidden
+
address@hidden is only available on Linux, FreeBSD and DragonFlyBSD hosts.
+
+Connect to a local parallel port.
+
address@hidden specifies the path to the parallel port device. @option{path} is
+required.
+
address@hidden table
+ETEXI
+
+DEFHEADING()
+
+DEFHEADING(Bluetooth(R) options:)
+
 DEF("bt", HAS_ARG, QEMU_OPTION_bt, \
-    "\n" \
     "-bt hci,null    dumb bluetooth HCI - doesn't respond to commands\n" \
     "-bt hci,host[:id]\n" \
     "                use host's HCI with the given name\n" \
@@ -1097,7 +1326,6 @@ DEF("bt", HAS_ARG, QEMU_OPTION_bt, \
     "-bt device:dev[,vlan=n]\n" \
     "                emulate a bluetooth device 'dev' in scatternet 'n'\n")
 STEXI
-Bluetooth(R) options:
 @table @option
 
 @item -bt hci[...]
@@ -1206,8 +1434,6 @@ STEXI
 @table @option
 ETEXI
 
-DEF("chardev", HAS_ARG, QEMU_OPTION_chardev, \
-    "-chardev spec   create unconnected chardev\n")
 DEF("serial", HAS_ARG, QEMU_OPTION_serial, \
     "-serial dev     redirect the serial port to char device 'dev'\n")
 STEXI
-- 
1.6.2.5