qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH v3 1/7] MIPS: Initial support of bonito north br


From: Isaku Yamahata
Subject: Re: [Qemu-devel] [PATCH v3 1/7] MIPS: Initial support of bonito north bridge used by fulong mini pc
Date: Fri, 4 Jun 2010 17:55:35 +0900
User-agent: Mutt/1.5.19 (2009-01-05)

On Fri, Jun 04, 2010 at 04:37:43PM +0800, Huacai Chen wrote:
> Signed-off-by: Huacai Chen <address@hidden>
> ---
>  Makefile.target                      |    1 +
>  default-configs/mips64el-softmmu.mak |    1 +
>  hw/bonito.c                          |  816 
> ++++++++++++++++++++++++++++++++++
>  hw/mips.h                            |    3 +
>  4 files changed, 821 insertions(+), 0 deletions(-)
>  create mode 100644 hw/bonito.c
> 
> diff --git a/Makefile.target b/Makefile.target
> index d06c679..ac36e2c 100644
> --- a/Makefile.target
> +++ b/Makefile.target
> @@ -221,6 +221,7 @@ obj-mips-y += vga.o i8259.o
>  obj-mips-y += g364fb.o jazz_led.o
>  obj-mips-y += gt64xxx.o mc146818rtc.o
>  obj-mips-y += piix4.o cirrus_vga.o
> +obj-mips-$(CONFIG_FULONG) += bonito.o
>  
>  obj-microblaze-y = petalogix_s3adsp1800_mmu.o
>  
> diff --git a/default-configs/mips64el-softmmu.mak 
> b/default-configs/mips64el-softmmu.mak
> index b372c1d..d35d923 100644
> --- a/default-configs/mips64el-softmmu.mak
> +++ b/default-configs/mips64el-softmmu.mak
> @@ -29,3 +29,4 @@ CONFIG_DP8393X=y
>  CONFIG_DS1225Y=y
>  CONFIG_MIPSNET=y
>  CONFIG_PFLASH_CFI01=y
> +CONFIG_FULONG=y
> diff --git a/hw/bonito.c b/hw/bonito.c
> new file mode 100644
> index 0000000..4f21042
> --- /dev/null
> +++ b/hw/bonito.c
> @@ -0,0 +1,816 @@
> +/*
> + * bonito north bridge support
> + *
> + * Copyright (c) 2008 yajin (address@hidden)
> + * Copyright (c) 2010 Huacai Chen (address@hidden)
> + *
> + * This code is licensed under the GNU GPL v2.
> + */
> +
> +/*
> + * fulong 2e mini pc has a bonito north bridge.
> + */
> +
> +/* what is the meaning of devfn in qemu and IDSEL in bonito northbridge?
> + *
> + * devfn   pci_slot<<3  + funno
> + * one pci bus can have 32 devices and each device can have 8 functions.
> + *
> + * In bonito north bridge, pci slot = IDSEL bit - 12.
> + * For example, PCI_IDSEL_VIA686B = 17,
> + * pci slot = 17-12=5
> + *
> + * so
> + * VT686B_FUN0's devfn = (5<<3)+0
> + * VT686B_FUN1's devfn = (5<<3)+1
> + *
> + * qemu also uses pci address for north bridge to access pci config register.
> + * bus_no   [23:16]
> + * dev_no   [15:11]
> + * fun_no   [10:8]
> + * reg_no   [7:2]
> + *
> + * so function bonito_sbridge_pciaddr for the translation from
> + * north bridge address to pci address.
> + */
> +
> +#include <assert.h>
> +
> +#include "hw.h"
> +#include "pci.h"
> +#include "pc.h"
> +#include "mips.h"
> +#include "pci_host.h"
> +
> +//#define DEBUG_BONITO
> +
> +#ifdef DEBUG_BONITO
> +#define DPRINTF(fmt, ...) fprintf(stderr, "%s: " fmt, __FUNCTION__, 
> ##__VA_ARGS__)
> +#else
> +#define DPRINTF(fmt, ...)
> +#endif
> +
> +/* from linux soure code. include/asm-mips/mips-boards/bonito64.h*/
> +#define BONITO_BOOT_BASE        0x1fc00000
> +#define BONITO_BOOT_SIZE        0x00100000
> +#define BONITO_BOOT_TOP         (BONITO_BOOT_BASE+BONITO_BOOT_SIZE-1)
> +#define BONITO_FLASH_BASE       0x1c000000
> +#define BONITO_FLASH_SIZE       0x03000000
> +#define BONITO_FLASH_TOP        (BONITO_FLASH_BASE+BONITO_FLASH_SIZE-1)
> +#define BONITO_SOCKET_BASE      0x1f800000
> +#define BONITO_SOCKET_SIZE      0x00400000
> +#define BONITO_SOCKET_TOP       (BONITO_SOCKET_BASE+BONITO_SOCKET_SIZE-1)
> +#define BONITO_REG_BASE         0x1fe00000
> +#define BONITO_REG_SIZE         0x00040000
> +#define BONITO_REG_TOP          (BONITO_REG_BASE+BONITO_REG_SIZE-1)
> +#define BONITO_DEV_BASE         0x1ff00000
> +#define BONITO_DEV_SIZE         0x00100000
> +#define BONITO_DEV_TOP          (BONITO_DEV_BASE+BONITO_DEV_SIZE-1)
> +#define BONITO_PCILO_BASE       0x10000000
> +#define BONITO_PCILO_BASE_VA    0xb0000000
> +#define BONITO_PCILO_SIZE       0x0c000000
> +#define BONITO_PCILO_TOP        (BONITO_PCILO_BASE+BONITO_PCILO_SIZE-1)
> +#define BONITO_PCILO0_BASE      0x10000000
> +#define BONITO_PCILO1_BASE      0x14000000
> +#define BONITO_PCILO2_BASE      0x18000000
> +#define BONITO_PCIHI_BASE       0x20000000
> +#define BONITO_PCIHI_SIZE       0x20000000
> +#define BONITO_PCIHI_TOP        (BONITO_PCIHI_BASE+BONITO_PCIHI_SIZE-1)
> +#define BONITO_PCIIO_BASE       0x1fd00000
> +#define BONITO_PCIIO_BASE_VA    0xbfd00000
> +#define BONITO_PCIIO_SIZE       0x00010000
> +#define BONITO_PCIIO_TOP        (BONITO_PCIIO_BASE+BONITO_PCIIO_SIZE-1)
> +#define BONITO_PCICFG_BASE      0x1fe80000
> +#define BONITO_PCICFG_SIZE      0x00080000
> +#define BONITO_PCICFG_TOP       (BONITO_PCICFG_BASE+BONITO_PCICFG_SIZE-1)
> +
> +
> +#define BONITO_PCICONFIGBASE    0x00
> +#define BONITO_REGBASE          0x100
> +
> +#define BONITO_PCICONFIG_BASE   (BONITO_PCICONFIGBASE+BONITO_REG_BASE)
> +#define BONITO_PCICONFIG_SIZE   (0x100)
> +
> +#define BONITO_INTERNAL_REG_BASE  (BONITO_REGBASE+BONITO_REG_BASE)
> +#define BONITO_INTERNAL_REG_SIZE  (0x70)
> +
> +#define BONITO_SPCICONFIG_BASE  (BONITO_PCICFG_BASE)
> +#define BONITO_SPCICONFIG_SIZE  (BONITO_PCICFG_SIZE)
> +
> +
> +
> +/* 1. Bonito h/w Configuration */
> +/* Power on register */
> +
> +#define BONITO_BONPONCFG        (0x00 >> 2)      /* 0x100 */
> +#define BONITO_BONGENCFG_OFFSET 0x4
> +#define BONITO_BONGENCFG        (BONITO_BONGENCFG_OFFSET>>2)   /*0x104 */
> +
> +/* 2. IO & IDE configuration */
> +#define BONITO_IODEVCFG         (0x08 >> 2)      /* 0x108 */
> +
> +/* 3. IO & IDE configuration */
> +#define BONITO_SDCFG            (0x0c >> 2)      /* 0x10c */
> +
> +/* 4. PCI address map control */
> +#define BONITO_PCIMAP           (0x10 >> 2)      /* 0x110 */
> +#define BONITO_PCIMEMBASECFG    (0x14 >> 2)      /* 0x114 */
> +#define BONITO_PCIMAP_CFG       (0x18 >> 2)      /* 0x118 */
> +
> +/* 5. ICU & GPIO regs */
> +/* GPIO Regs - r/w */
> +#define BONITO_GPIODATA_OFFSET  0x1c
> +#define BONITO_GPIODATA         (BONITO_GPIODATA_OFFSET >> 2)   /* 0x11c */
> +#define BONITO_GPIOIE           (0x20 >> 2)      /* 0x120 */
> +
> +/* ICU Configuration Regs - r/w */
> +#define BONITO_INTEDGE          (0x24 >> 2)      /* 0x124 */
> +#define BONITO_INTSTEER         (0x28 >> 2)      /* 0x128 */
> +#define BONITO_INTPOL           (0x2c >> 2)      /* 0x12c */
> +
> +/* ICU Enable Regs - IntEn & IntISR are r/o. */
> +#define BONITO_INTENSET         (0x30 >> 2)      /* 0x130 */
> +#define BONITO_INTENCLR         (0x34 >> 2)      /* 0x134 */
> +#define BONITO_INTEN            (0x38 >> 2)      /* 0x138 */
> +#define BONITO_INTISR           (0x3c >> 2)      /* 0x13c */
> +
> +/* PCI mail boxes */
> +#define BONITO_PCIMAIL0_OFFSET    0x40
> +#define BONITO_PCIMAIL1_OFFSET    0x44
> +#define BONITO_PCIMAIL2_OFFSET    0x48
> +#define BONITO_PCIMAIL3_OFFSET    0x4c
> +#define BONITO_PCIMAIL0         (0x40 >> 2)      /* 0x140 */
> +#define BONITO_PCIMAIL1         (0x44 >> 2)      /* 0x144 */
> +#define BONITO_PCIMAIL2         (0x48 >> 2)      /* 0x148 */
> +#define BONITO_PCIMAIL3         (0x4c >> 2)      /* 0x14c */
> +
> +/* 6. PCI cache */
> +#define BONITO_PCICACHECTRL     (0x50 >> 2)      /* 0x150 */
> +#define BONITO_PCICACHETAG      (0x54 >> 2)      /* 0x154 */
> +#define BONITO_PCIBADADDR       (0x58 >> 2)      /* 0x158 */
> +#define BONITO_PCIMSTAT         (0x5c >> 2)      /* 0x15c */
> +
> +/* 7. other*/
> +#define BONITO_TIMECFG          (0x60 >> 2)      /* 0x160 */
> +#define BONITO_CPUCFG           (0x64 >> 2)      /* 0x164 */
> +#define BONITO_DQCFG            (0x68 >> 2)      /* 0x168 */
> +#define BONITO_MEMSIZE          (0x6C >> 2)      /* 0x16c */
> +
> +#define BONITO_REGS             (0x70 >> 2)
> +
> +/* PCI config for south bridge. type 0 */
> +#define BONITO_PCICONF_IDSEL_MASK      0xfffff800     /* [31:11] */
> +#define BONITO_PCICONF_IDSEL_OFFSET    11
> +#define BONITO_PCICONF_FUN_MASK        0x700    /* [10:8] */
> +#define BONITO_PCICONF_FUN_OFFSET      8
> +#define BONITO_PCICONF_REG_MASK        0xFC
> +#define BONITO_PCICONF_REG_OFFSET      0
> +
> +
> +/* idsel BIT = pci slot number +12 */
> +#define PCI_SLOT_BASE              12
> +#define PCI_IDSEL_VIA686B_BIT      (17)
> +#define PCI_IDSEL_VIA686B          (1<<PCI_IDSEL_VIA686B_BIT)
> +
> +#define PCI_ADDR(busno,devno,funno,regno)  \
> +    ((((busno)<<16)&0xff0000) + (((devno)<<11)&0xf800) + 
> (((funno)<<8)&0x700) + (regno))
> +
> +typedef PCIHostState BonitoState;
> +
> +typedef struct PCIBonitoState
> +{
> +    PCIDevice dev;
> +    BonitoState *pcihost;
> +    uint32_t regs[BONITO_REGS];
> +
> +    struct bonldma {
> +        uint32_t ldmactrl;
> +        uint32_t ldmastat;
> +        uint32_t ldmaaddr;
> +        uint32_t ldmago;
> +    } bonldma;
> +
> +    /* Based at 1fe00300, bonito Copier */
> +    struct boncop {
> +        uint32_t copctrl;
> +        uint32_t copstat;
> +        uint32_t coppaddr;
> +        uint32_t copgo;
> +    } boncop;
> +
> +    /* Bonito registers */
> +    target_phys_addr_t bonito_reg_start;
> +    target_phys_addr_t bonito_reg_length;
> +    int bonito_reg_handle;
> +
> +    target_phys_addr_t bonito_pciconf_start;
> +    target_phys_addr_t bonito_pciconf_length;
> +    int bonito_pciconf_handle;
> +
> +    target_phys_addr_t bonito_spciconf_start;
> +    target_phys_addr_t bonito_spciconf_length;
> +    int bonito_spciconf_handle;
> +
> +    target_phys_addr_t bonito_pciio_start;
> +    target_phys_addr_t bonito_pciio_length;
> +    int bonito_pciio_handle;
> +
> +    target_phys_addr_t bonito_localio_start;
> +    target_phys_addr_t bonito_localio_length;
> +    int bonito_localio_handle;
> +
> +    target_phys_addr_t bonito_ldma_start;
> +    target_phys_addr_t bonito_ldma_length;
> +    int bonito_ldma_handle;
> +
> +    target_phys_addr_t bonito_cop_start;
> +    target_phys_addr_t bonito_cop_length;
> +    int bonito_cop_handle;
> +
> +} PCIBonitoState;
> +
> +PCIBonitoState * bonito_state;
> +
> +static void bonito_writel(void *opaque, target_phys_addr_t addr, uint32_t 
> val)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t saddr;
> +    int reset = 0;
> +
> +    saddr = (addr - BONITO_REGBASE) >> 2;
> +
> +    DPRINTF("bonito_writel "TARGET_FMT_plx" val %x saddr %x \n", addr, val, 
> saddr);
> +    switch (saddr) {
> +    case BONITO_BONPONCFG:
> +    case BONITO_IODEVCFG:
> +    case BONITO_SDCFG:
> +    case BONITO_PCIMAP:
> +    case BONITO_PCIMEMBASECFG:
> +    case BONITO_PCIMAP_CFG:
> +    case BONITO_GPIODATA:
> +    case BONITO_GPIOIE:
> +    case BONITO_INTEDGE:
> +    case BONITO_INTSTEER:
> +    case BONITO_INTPOL:
> +    case BONITO_PCIMAIL0:
> +    case BONITO_PCIMAIL1:
> +    case BONITO_PCIMAIL2:
> +    case BONITO_PCIMAIL3:
> +    case BONITO_PCICACHECTRL:
> +    case BONITO_PCICACHETAG:
> +    case BONITO_PCIBADADDR:
> +    case BONITO_PCIMSTAT:
> +    case BONITO_TIMECFG:
> +    case BONITO_CPUCFG:
> +    case BONITO_DQCFG:
> +    case BONITO_MEMSIZE:
> +        s->regs[saddr] = val;
> +        break;
> +    case BONITO_BONGENCFG:
> +        if (!(s->regs[saddr] & 0x04) && (val & 0x04)) {
> +            reset = 1; /* bit 2 jump from 0 to 1 cause reset */
> +        }
> +        s->regs[saddr] = val;
> +        if (reset) {
> +            qemu_system_reset_request();
> +        }
> +        break;
> +    case BONITO_INTENSET:
> +        s->regs[BONITO_INTENSET] = val;
> +        s->regs[BONITO_INTEN] |= val;
> +        break;
> +    case BONITO_INTENCLR:
> +        s->regs[BONITO_INTENCLR] = val;
> +        s->regs[BONITO_INTEN] &= ~val;
> +        break;
> +    case BONITO_INTEN:
> +    case BONITO_INTISR:
> +        DPRINTF("write to readonly bonito register %x \n", saddr);
> +        break;
> +    default:
> +        DPRINTF("write to unknown bonito register %x \n", saddr);
> +        break;
> +    }
> +}
> +
> +static uint32_t bonito_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t saddr;
> +
> +    saddr = (addr - BONITO_REGBASE) >> 2;
> +
> +    DPRINTF("bonito_readl "TARGET_FMT_plx"  \n", addr);
> +    switch (saddr) {
> +    case BONITO_INTISR:
> +        return s->regs[saddr];
> +    default:
> +        return s->regs[saddr];
> +    }
> +}
> +
> +static CPUWriteMemoryFunc * const bonito_write[] = {
> +    NULL,
> +    NULL,
> +    bonito_writel,
> +};
> +
> +static CPUReadMemoryFunc * const bonito_read[] = {
> +    NULL,
> +    NULL,
> +    bonito_readl,
> +};
> +
> +static void bonito_pciconf_writel(void *opaque, target_phys_addr_t addr,
> +                                  uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +
> +    DPRINTF("bonito_pciconf_writel "TARGET_FMT_plx" val %x \n", addr, val);
> +    s->dev.config_write(&s->dev, addr, val, 4);
> +}
> +
> +static uint32_t bonito_pciconf_readl(void *opaque, target_phys_addr_t addr)
> +{
> +
> +    PCIBonitoState *s = opaque;
> +
> +    DPRINTF("bonito_pciconf_readl "TARGET_FMT_plx"\n", addr);
> +    return s->dev.config_read(&s->dev, addr, 4);
> +}
> +
> +/* north bridge PCI configure space. 0x1fe0 0000 - 0x1fe0 00ff */
> +static CPUWriteMemoryFunc * const bonito_pciconf_write[] = {
> +    NULL,
> +    NULL,
> +    bonito_pciconf_writel,
> +};
> +
> +static CPUReadMemoryFunc * const bonito_pciconf_read[] = {
> +    NULL,
> +    NULL,
> +    bonito_pciconf_readl,
> +};
> +
> +static uint32_t bonito_ldma_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    uint32_t val;
> +    PCIBonitoState *s = opaque;
> +
> +    val = ((uint32_t *)(&s->bonldma))[addr/sizeof(uint32_t)];
> +
> +    return val;
> +}
> +
> +static void bonito_ldma_writel(void *opaque, target_phys_addr_t addr,
> +                               uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +
> +    ((uint32_t *)(&s->bonldma))[addr/sizeof(uint32_t)] = val & 0xffffffff;
> +}
> +
> +static CPUWriteMemoryFunc * const bonito_ldma_write[] = {
> +    NULL,
> +    NULL,
> +    bonito_ldma_writel,
> +};
> +
> +static CPUReadMemoryFunc * const bonito_ldma_read[] = {
> +    NULL,
> +    NULL,
> +    bonito_ldma_readl,
> +};
> +
> +static uint32_t bonito_cop_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    uint32_t val;
> +    PCIBonitoState *s = opaque;
> +
> +    val = ((uint32_t *)(&s->boncop))[addr/sizeof(uint32_t)];
> +
> +    return val;
> +}
> +
> +static void bonito_cop_writel(void *opaque, target_phys_addr_t addr,
> +                              uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +
> +    ((uint32_t *)(&s->boncop))[addr/sizeof(uint32_t)] = val & 0xffffffff;
> +}
> +
> +static CPUWriteMemoryFunc * const bonito_cop_write[] = {
> +    NULL,
> +    NULL,
> +    bonito_cop_writel,
> +};
> +
> +static CPUReadMemoryFunc * const bonito_cop_read[] = {
> +    NULL,
> +    NULL,
> +    bonito_cop_readl,
> +};
> +
> +static uint32_t bonito_sbridge_pciaddr(void *opaque, target_phys_addr_t addr)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t cfgaddr;
> +    uint32_t idsel;
> +    uint32_t devno;
> +    uint32_t funno;
> +    uint32_t regno;
> +    uint32_t pciaddr;
> +
> +    /* support type0 pci config */
> +    if ((s->regs[BONITO_PCIMAP_CFG] & 0x10000) != 0x0) {
> +        return 0xffffffff;
> +    }
> +
> +    cfgaddr = addr & 0xffff;
> +    cfgaddr |= (s->regs[BONITO_PCIMAP_CFG] & 0xffff) << 16;
> +
> +    idsel = (cfgaddr & BONITO_PCICONF_IDSEL_MASK) >> 
> BONITO_PCICONF_IDSEL_OFFSET;
> +    devno = ffs(idsel) - 1;
> +    funno = (cfgaddr & BONITO_PCICONF_FUN_MASK) >> BONITO_PCICONF_FUN_OFFSET;
> +    regno = (cfgaddr & BONITO_PCICONF_REG_MASK) >> BONITO_PCICONF_REG_OFFSET;
> +
> +    if (idsel == 0) {
> +        fprintf(stderr, "error in bonito pci config address" TARGET_FMT_plx
> +            ",pcimap_cfg=%x\n", addr, s->regs[BONITO_PCIMAP_CFG]);
> +        exit(1);
> +    }
> +    pciaddr = PCI_ADDR(pci_bus_num(s->pcihost->bus), devno, funno, regno);
> +    DPRINTF("cfgaddr %x pciaddr %x busno %x devno %d funno %d regno %d \n",
> +        cfgaddr, pciaddr, pci_bus_num(s->pcihost->bus), devno, funno, regno);
> +
> +    return pciaddr;
> +}
> +
> +static void bonito_spciconf_writeb(void *opaque, target_phys_addr_t addr,
> +                                   uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_writeb "TARGET_FMT_plx" val %x \n", addr, val);
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +    pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val & 0xff, 1);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +}
> +
> +static void bonito_spciconf_writew(void *opaque, target_phys_addr_t addr,
> +                                   uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_writew "TARGET_FMT_plx" val %x \n", addr, val);
> +    assert((addr&0x1)==0);
> +
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +    pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val, 2);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +}
> +
> +static void bonito_spciconf_writel(void *opaque, target_phys_addr_t addr,
> +                                   uint32_t val)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_writel "TARGET_FMT_plx" val %x \n", addr, val);
> +    assert((addr&0x3)==0);
> +
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +    pci_data_write(s->pcihost->bus, s->pcihost->config_reg, val, 4);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +}
> +
> +static uint32_t bonito_spciconf_readb(void *opaque, target_phys_addr_t addr)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_readb "TARGET_FMT_plx"  \n", addr);
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return 0xff;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +
> +    return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 1);
> +}
> +
> +static uint32_t bonito_spciconf_readw(void *opaque, target_phys_addr_t addr)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_readw "TARGET_FMT_plx"  \n", addr);
> +    assert((addr&0x1)==0);
> +
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return 0xffff;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +
> +    return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 2);
> +}
> +
> +static uint32_t bonito_spciconf_readl(void *opaque, target_phys_addr_t addr)
> +{
> +    PCIBonitoState *s = opaque;
> +    uint32_t pciaddr;
> +    uint16_t status;
> +
> +    DPRINTF("bonito_spciconf_readl "TARGET_FMT_plx"  \n", addr);
> +    assert((addr&0x3) == 0);
> +
> +    pciaddr = bonito_sbridge_pciaddr(s, addr);
> +
> +    if (pciaddr == 0xffffffff) {
> +        return 0xffffffff;
> +    }
> +
> +    /* set the pci address in s->config_reg */
> +    s->pcihost->config_reg = (pciaddr) | (1u << 31);
> +
> +    /* clear PCI_STATUS_REC_MASTER_ABORT and PCI_STATUS_REC_TARGET_ABORT */
> +    status = pci_get_word(s->dev.config + PCI_STATUS);
> +    status &= ~(PCI_STATUS_REC_MASTER_ABORT | PCI_STATUS_REC_TARGET_ABORT);
> +    pci_set_word(s->dev.config + PCI_STATUS, status);
> +
> +    return pci_data_read(s->pcihost->bus, s->pcihost->config_reg, 4);
> +}
> +
> +/* south bridge PCI configure space. 0x1fe8 0000 - 0x1fef ffff */
> +static CPUWriteMemoryFunc * const bonito_spciconf_write[] = {
> +    bonito_spciconf_writeb,
> +    bonito_spciconf_writew,
> +    bonito_spciconf_writel,
> +};
> +
> +static CPUReadMemoryFunc * const bonito_spciconf_read[] = {
> +    bonito_spciconf_readb,
> +    bonito_spciconf_readw,
> +    bonito_spciconf_readl,
> +};
> +
> +#define BONITO_IRQ_BASE 32
> +
> +static void pci_bonito_set_irq(void *opaque, int irq_num, int level)
> +{
> +    qemu_irq *pic = opaque;
> +    int internal_irq = irq_num - BONITO_IRQ_BASE;
> +
> +    if (bonito_state->regs[BONITO_INTEDGE] & (1<<internal_irq)) {
> +        qemu_irq_pulse(*pic);
> +    } else {   /* level triggered */
> +        if (bonito_state->regs[BONITO_INTPOL] & (1<<internal_irq)) {
> +            qemu_irq_raise(*pic);
> +        } else {
> +            qemu_irq_lower(*pic);
> +        }
> +    }
> +}
> +
> +/* map the original irq (0~3) to bonito irq (16~47, but 16~31 are unused) */
> +static int pci_bonito_map_irq(PCIDevice * pci_dev, int irq_num)
> +{
> +    int slot;
> +
> +    slot = (pci_dev->devfn >> 3);
> +
> +    switch (slot) {
> +    case 5:   /* FULONG2E_VIA_SLOT, SouthBridge, IDE, USB, ACPI, AC97, MC97 
> */
> +        return irq_num % 4 + BONITO_IRQ_BASE;
> +    case 6:   /* FULONG2E_ATI_SLOT, VGA */
> +        return 4 + BONITO_IRQ_BASE;
> +    case 7:   /* FULONG2E_RTL_SLOT, RTL8139 */
> +        return 5 + BONITO_IRQ_BASE;
> +    case 8 ... 12: /* PCI slot 1 to 4 */
> +        return (slot - 8 + irq_num) + 6 + BONITO_IRQ_BASE;
> +    default:  /* Unknown device, don't do any translation */
> +        return irq_num;
> +    }
> +}
> +
> +static void bonito_reset(void *opaque)
> +{
> +    PCIBonitoState *s = opaque;
> +
> +    /* set the default value of north bridge registers */
> +
> +    s->regs[BONITO_BONPONCFG] = 0xc40;
> +    s->regs[BONITO_BONGENCFG] = 0x1384;
> +    s->regs[BONITO_IODEVCFG] = 0x2bff8010;
> +    s->regs[BONITO_SDCFG] = 0x255e0091;
> +
> +    s->regs[BONITO_GPIODATA] = 0x1ff;
> +    s->regs[BONITO_GPIOIE] = 0x1ff;
> +    s->regs[BONITO_DQCFG] = 0x8;
> +    s->regs[BONITO_MEMSIZE] = 0x10000000;
> +    s->regs[BONITO_PCIMAP] = 0x6140;
> +}
> +
> +static const VMStateDescription vmstate_bonito = {
> +    .name = "Bonito",
> +    .version_id = 1,
> +    .minimum_version_id = 1,
> +    .minimum_version_id_old = 1,
> +    .fields      = (VMStateField []) {
> +        VMSTATE_PCI_DEVICE(dev, PCIBonitoState),
> +        VMSTATE_END_OF_LIST()
> +    }
> +};
> +
> +static int bonito_pcihost_initfn(SysBusDevice *dev)
> +{
> +    return 0;
> +}
> +
> +static int bonito_initfn(PCIDevice *dev)
> +{
> +    PCIBonitoState *s = DO_UPCAST(PCIBonitoState, dev, dev);
> +
> +    /* Bonito North Bridge, built on FPGA, VENDOR_ID/DEVICE_ID are 
> "undefined" */
> +    pci_config_set_vendor_id(dev->config, 0xdf53);
> +    pci_config_set_device_id(dev->config, 0x00d5);
> +    pci_config_set_class(dev->config, PCI_CLASS_BRIDGE_HOST);
> +
> +    /* set the north bridge register mapping */
> +    s->bonito_reg_handle = cpu_register_io_memory(bonito_read, bonito_write, 
> s);
> +    s->bonito_reg_start = BONITO_INTERNAL_REG_BASE;
> +    s->bonito_reg_length = BONITO_INTERNAL_REG_SIZE;
> +    cpu_register_physical_memory(s->bonito_reg_start, s->bonito_reg_length,
> +                                 s->bonito_reg_handle);
> +
> +    /* set the north bridge pci configure  mapping */
> +    s->bonito_pciconf_handle = cpu_register_io_memory(bonito_pciconf_read,
> +                                                      bonito_pciconf_write, 
> s);
> +    s->bonito_pciconf_start = BONITO_PCICONFIG_BASE;
> +    s->bonito_pciconf_length = BONITO_PCICONFIG_SIZE;
> +    cpu_register_physical_memory(s->bonito_pciconf_start, 
> s->bonito_pciconf_length,
> +                                 s->bonito_pciconf_handle);
> +
> +    /* set the south bridge pci configure  mapping */
> +    s->bonito_spciconf_handle = cpu_register_io_memory(bonito_spciconf_read,
> +                                                       
> bonito_spciconf_write, s);
> +    s->bonito_spciconf_start = BONITO_SPCICONFIG_BASE;
> +    s->bonito_spciconf_length = BONITO_SPCICONFIG_SIZE;
> +    cpu_register_physical_memory(s->bonito_spciconf_start, 
> s->bonito_spciconf_length,
> +                                 s->bonito_spciconf_handle);
> +
> +    s->bonito_ldma_handle = cpu_register_io_memory(bonito_ldma_read,
> +                                                   bonito_ldma_write, s);
> +    s->bonito_ldma_start = 0xbfe00200;
> +    s->bonito_ldma_length = 0x100;
> +    cpu_register_physical_memory(s->bonito_ldma_start, s->bonito_ldma_length,
> +                                 s->bonito_ldma_handle);
> +
> +    s->bonito_cop_handle = cpu_register_io_memory(bonito_cop_read,
> +                                                  bonito_cop_write, s);
> +    s->bonito_cop_start = 0xbfe00300;
> +    s->bonito_cop_length = 0x100;
> +    cpu_register_physical_memory(s->bonito_cop_start, s->bonito_cop_length,
> +                                 s->bonito_cop_handle);
> +
> +    /* Map PCI IO Space  0x1fd0 0000 - 0x1fd1 0000 */
> +    s->bonito_pciio_start = BONITO_PCIIO_BASE;
> +    s->bonito_pciio_length = BONITO_PCIIO_SIZE;
> +    isa_mem_base = s->bonito_pciio_start;
> +    isa_mmio_init(s->bonito_pciio_start, s->bonito_pciio_length, 0);
> +
> +    /* add pci local io mapping */
> +    s->bonito_localio_start = BONITO_DEV_BASE;
> +    s->bonito_localio_length = BONITO_DEV_SIZE;
> +    isa_mmio_init(s->bonito_localio_start, s->bonito_localio_length, 0);
> +
> +    /* set the default value of north bridge pci config */
> +    s->dev.config[0x04] = 0x00;
> +    s->dev.config[0x05] = 0x00;
> +    s->dev.config[0x06] = 0x00;
> +    s->dev.config[0x07] = 0x00;
> +
> +    s->dev.config[0x08] = 0x01;
> +    s->dev.config[0x09] = 0x00;
> +    s->dev.config[0x0a] = 0x00;
> +    s->dev.config[0x0b] = 0x06;
> +
> +    s->dev.config[0x2c] = 0x00;
> +    s->dev.config[0x2d] = 0x00;
> +    s->dev.config[0x2e] = 0x00;
> +    s->dev.config[0x2f] = 0x00;
> +
> +    s->dev.config[0x3c] = 0x00;
> +    s->dev.config[0x3d] = 0x01;
> +    s->dev.config[0x3e] = 0x3c;
> +    s->dev.config[0x3f] = 0x00;

Please use symbolic value defined in pci_regs.h and access function.
pci_set_{long, word} where appropriate.


> +
> +    qemu_register_reset(bonito_reset, s);
> +
> +    return 0;
> +}
> +
> +PCIBus *bonito_init(qemu_irq *pic)
> +{
> +    DeviceState *dev;
> +    PCIBus *b;
> +    BonitoState *pcihost;
> +    PCIBonitoState *s;
> +    PCIDevice *d;
> +
> +    dev = qdev_create(NULL, "Bonito-pcihost");
> +    pcihost = FROM_SYSBUS(BonitoState, sysbus_from_qdev(dev));
> +    b = pci_register_bus(&pcihost->busdev.qdev, "pci", pci_bonito_set_irq,
> +                         pci_bonito_map_irq, pic, 0x28, 32);
> +    pcihost->bus = b;
> +    qdev_init_nofail(dev);
> +    pci_bus_set_mem_base(pcihost->bus, 0x10000000);
> +
> +    d = pci_create_simple(b, PCI_DEVFN(0, 0), "Bonito");
> +    s = DO_UPCAST(PCIBonitoState, dev, d);
> +    s->pcihost = pcihost;
> +    bonito_state = s;
> +
> +    return b;
> +}
> +
> +static PCIDeviceInfo bonito_info = {
> +    .qdev.name    = "Bonito",
> +    .qdev.desc    = "Host bridge",
> +    .qdev.size    = sizeof(PCIBonitoState),
> +    .qdev.vmsd    = &vmstate_bonito,
> +    .qdev.no_user = 1,
> +    .init         = bonito_initfn,
> +};
> +
> +static SysBusDeviceInfo bonito_pcihost_info = {
> +    .init         = bonito_pcihost_initfn,
> +    .qdev.name    = "Bonito-pcihost",
> +    .qdev.size    = sizeof(BonitoState),
> +    .qdev.no_user = 1,
> +};
> +
> +static void bonito_register(void)
> +{
> +    sysbus_register_withprop(&bonito_pcihost_info);
> +    pci_qdev_register(&bonito_info);
> +}
> +device_init(bonito_register);
> diff --git a/hw/mips.h b/hw/mips.h
> index 30791a8..617ea10 100644
> --- a/hw/mips.h
> +++ b/hw/mips.h
> @@ -5,6 +5,9 @@
>  /* gt64xxx.c */
>  PCIBus *pci_gt64120_init(qemu_irq *pic);
>  
> +/* bonito.c */
> +PCIBus *bonito_init(qemu_irq *pic);
> +
>  /* ds1225y.c */
>  void *ds1225y_init(target_phys_addr_t mem_base, const char *filename);
>  void ds1225y_set_protection(void *opaque, int protection);
> -- 
> 1.7.0.4
> 
> 

-- 
yamahata



reply via email to

[Prev in Thread] Current Thread [Next in Thread]