[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/6] usb-ccid: add CCID bus
From: |
Blue Swirl |
Subject: |
Re: [Qemu-devel] [PATCH 1/6] usb-ccid: add CCID bus |
Date: |
Fri, 26 Nov 2010 19:05:02 +0000 |
On Thu, Nov 25, 2010 at 4:22 PM, Alon Levy <address@hidden> wrote:
> A CCID device is a smart card reader. It is a USB device, defined at [1].
> This patch introduces the usb-ccid device that is a ccid bus. Next patches
> will
> introduce two card types to use it, a passthru card and an emulated card.
>
> [1] http://www.usb.org/developers/devclass_docs/DWG_Smart-Card_CCID_Rev110.
>
> Signed-off-by: Alon Levy <address@hidden>
> ---
> Makefile.objs | 1 +
> configure | 12 +
> hw/ccid.h | 34 ++
> hw/usb-ccid.c | 1342
> +++++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 4 files changed, 1389 insertions(+), 0 deletions(-)
> create mode 100644 hw/ccid.h
> create mode 100644 hw/usb-ccid.c
>
> diff --git a/Makefile.objs b/Makefile.objs
> index 23b17ce..713131f 100644
> --- a/Makefile.objs
> +++ b/Makefile.objs
> @@ -183,6 +183,7 @@ hw-obj-$(CONFIG_FDC) += fdc.o
> hw-obj-$(CONFIG_ACPI) += acpi.o acpi_piix4.o
> hw-obj-$(CONFIG_APM) += pm_smbus.o apm.o
> hw-obj-$(CONFIG_DMA) += dma.o
> +hw-obj-$(CONFIG_SMARTCARD) += usb-ccid.o
>
> # PPC devices
> hw-obj-$(CONFIG_OPENPIC) += openpic.o
> diff --git a/configure b/configure
> index 2917874..fb9eac2 100755
> --- a/configure
> +++ b/configure
> @@ -332,6 +332,7 @@ zero_malloc=""
> trace_backend="nop"
> trace_file="trace"
> spice=""
> +smartcard="no"
>
> # OS specific
> if check_define __linux__ ; then
> @@ -739,6 +740,10 @@ for opt do
> ;;
> --enable-vhost-net) vhost_net="yes"
> ;;
> + --disable-smartcard) smartcard="no"
> + ;;
> + --enable-smartcard) smartcard="yes"
> + ;;
> --*dir)
> ;;
> *) echo "ERROR: unknown option $opt"; show_help="yes"
> @@ -934,6 +939,8 @@ echo " --trace-file=NAME Full PATH,NAME of file
> to store traces"
> echo " Default:trace-<pid>"
> echo " --disable-spice disable spice"
> echo " --enable-spice enable spice"
> +echo " --disable-smartcard disable smartcard support"
> +echo " --enable-smartcard enable smartcard support"
> echo ""
> echo "NOTE: The object files are built at the place where configure is
> launched"
> exit 1
> @@ -2354,6 +2361,7 @@ echo "vhost-net support $vhost_net"
> echo "Trace backend $trace_backend"
> echo "Trace output file $trace_file-<pid>"
> echo "spice support $spice"
> +echo "smartcard support $smartcard"
>
> if test $sdl_too_old = "yes"; then
> echo "-> Your SDL version is too old - please upgrade to have SDL support"
> @@ -2617,6 +2625,10 @@ if test "$spice" = "yes" ; then
> echo "CONFIG_SPICE=y" >> $config_host_mak
> fi
>
> +if test "$smartcard" = "yes" ; then
> + echo "CONFIG_SMARTCARD=y" >> $config_host_mak
> +fi
> +
> # XXX: suppress that
> if [ "$bsd" = "yes" ] ; then
> echo "CONFIG_BSD=y" >> $config_host_mak
> diff --git a/hw/ccid.h b/hw/ccid.h
> new file mode 100644
> index 0000000..a38f971
> --- /dev/null
> +++ b/hw/ccid.h
> @@ -0,0 +1,34 @@
> +#ifndef __CCID_H__
> +#define __CCID_H__
> +
> +#include "qdev.h"
> +
> +typedef struct CCIDCardState CCIDCardState;
> +typedef struct CCIDCardInfo CCIDCardInfo;
> +
> +struct CCIDCardState {
> + DeviceState qdev;
> +};
> +
> +struct CCIDCardInfo {
> + DeviceInfo qdev;
> + void (*print)(Monitor *mon, CCIDCardState *card, int indent);
> + const uint8_t *(*get_atr)(CCIDCardState *card, uint32_t *len);
> + void (*apdu_from_guest)(CCIDCardState *card, const uint8_t *apdu,
> uint32_t len);
> + int (*exitfn)(CCIDCardState *card);
> + int (*initfn)(CCIDCardState *card);
> +};
> +
> +void ccid_card_send_apdu_to_guest(CCIDCardState *card, uint8_t* apdu,
> uint32_t len);
> +void ccid_card_card_removed(CCIDCardState *card);
> +void ccid_card_card_inserted(CCIDCardState *card);
> +void ccid_card_card_error(CCIDCardState *card, uint64_t error);
> +void ccid_card_qdev_register(CCIDCardInfo *card);
> +
> +/* support guest visible insertion/removal of ccid devices based on actual
> + * devices connected/removed. Called by card implementation (passthru,
> local) */
> +int ccid_card_ccid_attach(CCIDCardState *card);
> +void ccid_card_ccid_detach(CCIDCardState *card);
> +
> +#endif // __CCID_H__
> +
> diff --git a/hw/usb-ccid.c b/hw/usb-ccid.c
> new file mode 100644
> index 0000000..66c1dba
> --- /dev/null
> +++ b/hw/usb-ccid.c
> @@ -0,0 +1,1342 @@
> +/*
> + * CCID Device emulation
> + *
> + * Based on usb-serial.c:
> + * Copyright (c) 2006 CodeSourcery.
> + * Copyright (c) 2008 Samuel Thibault <address@hidden>
> + * Written by Paul Brook, reused for FTDI by Samuel Thibault,
> + * Reused for CCID by Alon Levy.
> + * Contributed to by Robert Relyea
> + * Copyright (c) 2010 Red Hat.
> + *
> + * This code is licenced under the LGPL.
> + */
> +
> +/* References:
> + *
> + * CCID Specification Revision 1.1 April 22nd 2005
> + * "Universal Serial Bus, Device Class: Smart Card"
> + * Specification for Integrated Circuit(s) Cards Interface Devices
> + *
> + * KNOWN BUGS
> + * 1. remove/insert can sometimes result in removed state instead of
> inserted.
> + * This is a result of the following:
> + * symptom: dmesg shows ERMOTEIO (-121), pcscd shows -99. This happens
> + * when we send a too short packet, seen in uhci-usb.c, resulting from
> + * a urb requesting SPD and us returning a smaller packet.
> + * Not sure which messages trigger this.
> + *
> + */
> +
> +#include "qemu-common.h"
> +#include "qemu-error.h"
> +#include "usb.h"
> +#include "monitor.h"
> +
> +#include "hw/ccid.h"
> +
> +//#define DEBUG_CCID
> +
> +#define DPRINTF(s, lvl, fmt, ...) \
> +do { if (lvl <= s->debug) { printf("usb-ccid: " fmt , ## __VA_ARGS__); } }
> while (0)
> +
> +#define CCID_DEV_NAME "usb-ccid"
> +
> +/* The two options for variable sized buffers:
> + * make them constant size, for large enough constant,
> + * or handle the migration complexity - VMState doesn't handle this case.
> + * sizes are expected never to be exceeded, unless guest misbehaves. */
> +#define BULK_OUT_DATA_SIZE 65536
> +#define PENDING_ANSWERS_NUM 128
> +
> +#define BULK_IN_BUF_SIZE 384
> +#define BULK_IN_PENDING_NUM 8
> +
> +#define InterfaceOutClass
> ((USB_DIR_OUT|USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
> +#define InterfaceInClass ((USB_DIR_IN
> |USB_TYPE_CLASS|USB_RECIP_INTERFACE)<<8)
> +
> +#define CCID_CONTROL_ABORT 0x1
> +#define CCID_CONTROL_GET_CLOCK_FREQUENCIES 0x2
> +#define CCID_CONTROL_GET_DATA_RATES 0x3
> +
> +#define CCID_PRODUCT_DESCRIPTION "QEMU USB CCID"
> +#define CCID_VENDOR_DESCRIPTION "QEMU " QEMU_VERSION
> +#define CCID_INTERFACE_NAME "CCID Interface"
> +#define CCID_SERIAL_NUMBER_STRING "1"
> +/* Using Gemplus Vendor and Product id
> + Effect on various drivers:
> + * usbccid.sys (winxp, others untested) is a class driver so it doesn't
> care.
> + * linux has a number of class drivers, but openct filters based on
> + vendor/product (/etc/openct.conf under fedora), hence Gemplus.
> + */
> +#define CCID_VENDOR_ID 0x08e6
> +#define CCID_PRODUCT_ID 0x4433
> +#define CCID_DEVICE_VERSION 0x0000
> +
> +/* BULK_OUT messages from PC to Reader
> + Defined in CCID Rev 1.1 6.1 (page 26)
> + */
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOn 0x62
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_IccPowerOff 0x63
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_GetSlotStatus 0x65
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_XfrBlock 0x6f
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_GetParameters 0x6c
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_ResetParameters 0x6d
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_SetParameters 0x61
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_Escape 0x6b
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_IccClock 0x6e
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_T0APDU 0x6a
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_Secure 0x69
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_Mechanical 0x71
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_Abort 0x72
> +#define CCID_MESSAGE_TYPE_PC_to_RDR_SetDataRateAndClockFrequency 0x73
> +
> +/* BULK_IN messages from Reader to PC
> + Defined in CCID Rev 1.1 6.2 (page 48)
> + */
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock 0x80
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus 0x81
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_Parameters 0x82
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_Escape 0x83
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_DataRateAndClockFrequency 0x84
> +
> +/* INTERRUPT_IN messages from Reader to PC
> + Defined in CCID Rev 1.1 6.3 (page 56)
> + */
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange 0x50
> +#define CCID_MESSAGE_TYPE_RDR_to_PC_HardwareError 0x51
> +
> +/* Endpoints for CCID - addresses are up to us to decide.
> + To support slot insertion and removal we must have an interrupt in ep
> + in addition we need a bulk in and bulk out ep
> + 5.2, page 20
> + */
> +#define CCID_INT_IN_EP 1
> +#define CCID_BULK_IN_EP 2
> +#define CCID_BULK_OUT_EP 3
> +
> +/* bmSlotICCState masks */
> +#define SLOT_0_STATE_MASK 1
> +#define SLOT_0_CHANGED_MASK 2
> +
> +/* Status codes that go in bStatus (see 6.2.6) */
> +enum {
> + ICC_STATUS_PRESENT_ACTIVE = 0,
> + ICC_STATUS_PRESENT_INACTIVE,
> + ICC_STATUS_NOT_PRESENT
> +};
> +
> +enum {
> + COMMAND_STATUS_NO_ERROR = 0,
> + COMMAND_STATUS_FAILED,
> + COMMAND_STATUS_TIME_EXTENSION_REQUIRED
> +};
> +
> +/* Error codes that go in bError (see 6.2.6)
> + */
> +enum {
> + ERROR_CMD_NOT_SUPPORTED = 0,
> + ERROR_CMD_ABORTED = -1,
> + ERROR_ICC_MUTE = -2,
> + ERROR_XFR_PARITY_ERROR = -3,
> + ERROR_XFR_OVERRUN = -4,
> + ERROR_HW_ERROR = -5,
> +};
> +
> +/* 6.2.6 RDR_to_PC_SlotStatus definitions */
> +enum {
> + CLOCK_STATUS_RUNNING = 0,
> + /* 0 - Clock Running, 1 - Clock stopped in State L, 2 - H,
> + 3 - unkonwn state. rest are RFU
> + */
> +};
> +
> +typedef struct __attribute__ ((__packed__)) {
Please don't use anonymous structs.
> + uint8_t bMessageType;
Why aHungarian nNotation? It's not QEMU style.
> + uint32_t dwLength;
> + uint8_t bSlot;
> + uint8_t bSeq;
> +} CCID_Header;
Packed structure with unaligned fields. Will this work?
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_Header hdr;
> + uint8_t bStatus; /* Only used in BULK_IN */
> + uint8_t bError; /* Only used in BULK_IN */
> +} CCID_BULK_IN;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_BULK_IN b;
> + uint8_t bClockStatus;
> +} CCID_SlotStatus;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_BULK_IN b;
> + uint8_t bProtocolNum;
> + uint8_t abProtocolDataStructure[0];
> +} CCID_Parameter;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_BULK_IN b;
> + uint8_t bChainParameter;
> + uint8_t abData[0];
> +} CCID_DataBlock;
> +
> +/* 6.1.4 PC_to_RDR_XfrBlock */
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_Header hdr;
> + uint8_t bBWI; /* Block Waiting Timeout */
> + uint16_t wLevelParameter;
> + uint8_t abData[0];
> +} CCID_XferBlock;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_Header hdr;
> + uint8_t bPowerSelect;
> + uint16_t abRFU;
> +} CCID_IccPowerOn;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_Header hdr;
> + uint16_t abRFU;
> +} CCID_IccPowerOff;
> +
> +typedef struct __attribute__ ((__packed__)) {
> + CCID_Header hdr;
> + uint8_t bProtocolNum;
> + uint8_t abProtocolDataStructure[0];
> +} CCID_SetParameter;
> +
> +typedef struct {
> + uint8_t bMessageType; /*
> CCID_MESSAGE_TYPE_RDR_to_PC_NotifySlotChange */
> + uint8_t bmSlotICCState;
> +} CCID_Notify_Slot_Change;
> +
> +/* used for DataBlock response to XferBlock */
> +typedef struct answer_t {
> + uint8_t slot;
> + uint8_t seq;
> +} answer_t;
> +
answer_t is not in line with CODING_STYLE.
> +/* pending BULK_IN messages */
> +typedef struct bulk_in_t {
> + uint8_t data[BULK_IN_BUF_SIZE];
> + uint32_t len;
> + uint32_t pos;
> +} bulk_in_t;
Neither is this.
> +
> +enum {
> + MIGRATION_NONE,
> + MIGRATION_MIGRATED,
> +};
> +
> +typedef struct CCIDBus CCIDBus;
> +typedef struct USBCCIDState USBCCIDState;
> +
> +#define MAX_PROTOCOL_SIZE 7
> +
> +/**
> + * powered - defaults to true, changed by PowerOn/PowerOff messages
> + */
> +struct USBCCIDState {
> + USBDevice dev;
> + CCIDBus *bus;
> + CCIDCardState *card;
> + CCIDCardInfo *cardinfo; /* caching the info pointer */
> + uint8_t debug;
> + uint8_t auto_attach;
> + bulk_in_t bulk_in_pending[BULK_IN_PENDING_NUM]; /* circular */
> + uint32_t bulk_in_pending_start;
> + uint32_t bulk_in_pending_end; /* first free */
> + uint32_t bulk_in_pending_num;
> + bulk_in_t *current_bulk_in;
> + uint8_t bulk_out_data[BULK_OUT_DATA_SIZE];
> + uint32_t bulk_out_pos;
> + uint8_t bmSlotICCState;
> + uint8_t powered;
> + uint8_t notify_slot_change;
> + uint64_t last_answer_error;
> + answer_t pending_answers[PENDING_ANSWERS_NUM];
> + uint32_t pending_answers_start;
> + uint32_t pending_answers_end;
> + uint32_t pending_answers_num;
> + uint8_t bError;
> + uint8_t bmCommandStatus;
> + uint8_t bProtocolNum;
> + uint8_t abProtocolDataStructure[MAX_PROTOCOL_SIZE];
> + uint32_t ulProtocolDataStructureSize;
> + uint8_t attached_vmstate;
> + uint32_t state_vmstate;
> + uint8_t migration_state;
> + uint32_t migration_target_ip;
> + uint16_t migration_target_port;
> +};
> +
> +/* Slot specific variables. We emulate a single slot card reader.
> + */
> +
> +
> +/* CCID Spec chapter 4: CCID uses a standard device descriptor per Chapter 9,
> + * "USB Device Framework", section 9.6.1, in the Universal Serial Bus
> + * Specification.
> + *
> + * This device implemented based on the spec and with an Athena Smart Card
> + * Reader as reference:
> + * 0dc3:1004 Athena Smartcard Solutions, Inc.
> + */
> +
> +static const uint8_t qemu_ccid_dev_descriptor[] = {
> + 0x12, /* u8 bLength; */
> + USB_DT_DEVICE, /* u8 bDescriptorType; Device */
> + 0x10, 0x01, /* u16 bcdUSB; v1.1 */
> +
> + 0x00, /* u8 bDeviceClass; */
> + 0x00, /* u8 bDeviceSubClass; */
> + 0x00, /* u8 bDeviceProtocol; [ low/full speeds only ] */
> + 0x40, /* u8 bMaxPacketSize0; 8 Bytes (valid: 8,16,32,64) */
> +
> + /* Vendor and product id are arbitrary. */
> + /* u16 idVendor */
> + CCID_VENDOR_ID & 0xff, CCID_VENDOR_ID >> 8,
> + /* u16 idProduct */
> + CCID_PRODUCT_ID & 0xff, CCID_PRODUCT_ID >> 8,
> + /* u16 bcdDevice */
> + CCID_DEVICE_VERSION & 0xff, CCID_DEVICE_VERSION >> 8,
> + 0x01, /* u8 iManufacturer; */
> + 0x02, /* u8 iProduct; */
> + 0x03, /* u8 iSerialNumber; */
> + 0x01, /* u8 bNumConfigurations; */
> +};
> +
> +static const uint8_t qemu_ccid_config_descriptor[] = {
> +
> + /* one configuration */
> + 0x09, /* u8 bLength; */
> + USB_DT_CONFIG, /* u8 bDescriptorType; Configuration */
> + 0x5d, 0x00, /* u16 wTotalLength; 9+9+54+7+7+7 */
> + 0x01, /* u8 bNumInterfaces; (1) */
> + 0x01, /* u8 bConfigurationValue; */
> + 0x00, /* u8 iConfiguration; */
> + 0xe0, /* u8 bmAttributes;
> + Bit 7: must be set,
> + 6: Self-powered,
> + 5: Remote wakeup,
> + 4..0: resvd */
> + 100/2, /* u8 MaxPower; 50 == 100mA */
> +
> + /* one interface */
> + 0x09, /* u8 if_bLength; */
> + USB_DT_INTERFACE, /* u8 if_bDescriptorType; Interface */
> + 0x00, /* u8 if_bInterfaceNumber; */
> + 0x00, /* u8 if_bAlternateSetting; */
> + 0x03, /* u8 if_bNumEndpoints; */
> + 0x0b, /* u8 if_bInterfaceClass; Smart Card Device Class */
> + 0x00, /* u8 if_bInterfaceSubClass; Subclass code */
> + 0x00, /* u8 if_bInterfaceProtocol; Protocol code */
> + 0x04, /* u8 if_iInterface; Index of string descriptor */
> +
> + /* Smart Card Device Class Descriptor */
> + 0x36, /* u8 bLength; */
> + 0x21, /* u8 bDescriptorType; Functional */
> + 0x10, 0x01, /* u16 bcdCCID; CCID Specification Release Number. */
> + 0x00, /* u8 bMaxSlotIndex; The index of the highest available
> + slot on this device. All slots are consecutive
> starting
> + at 00h. */
> + 0x07, /* u8 bVoltageSupport; 01h - 5.0v, 02h - 3.0, 03 - 1.8
> */
> +
> + 0x03, 0x00, /* u32 dwProtocols; RRRR PPPP. RRRR = 0000h.*/
> + 0x00, 0x00, /* PPPP: 0001h = Protocol T=0, 0002h = Protocol T=1 */
> + /* u32 dwDefaultClock; in kHZ (0x0fa0 is 4 MHz) */
> + 0xa0, 0x0f, 0x00, 0x00,
> + /* u32 dwMaximumClock; */
> + 0x00, 0x00, 0x01, 0x00,
> + 0x00, /* u8 bNumClockSupported; 0 means just the default and
> max. */
> + /* u32 dwDataRate ;bps. 9600 == 00002580h */
> + 0x80, 0x25, 0x00, 0x00,
> + /* u32 dwMaxDataRate ; 11520 bps == 0001C200h */
> + 0x00, 0xC2, 0x01, 0x00,
> + 0x00, /* u8 bNumDataRatesSupported; 00 means all rates
> between
> + * default and max */
> + /* u32 dwMaxIFSD; maximum IFSD supported by CCID for
> protocol
> + * T=1 (Maximum seen from various cards) */
> + 0xfe, 0x00, 0x00, 0x00,
> + /* u32 dwSyncProtocols; 1 - 2-wire, 2 - 3-wire, 4 - I2C
> */
> + 0x00, 0x00, 0x00, 0x00,
> + /* u32 dwMechanical; 0 - no special characteristics. */
> + 0x00, 0x00, 0x00, 0x00,
> + /* u32 dwFeatures;
> + * 0 - No special characteristics
> + * + 2 Automatic parameter configuration based on ATR
> data
> + * + 4 Automatic activation of ICC on inserting
> + * + 8 Automatic ICC voltage selection
> + * + 10 Automatic ICC clock frequency change
> + * + 20 Automatic baud rate change
> + * + 40 Automatic parameters negotiation made by the
> CCID
> + * + 80 automatic PPS made by the CCID
> + * 100 CCID can set ICC in clock stop mode
> + * 200 NAD value other then 00 accepted (T=1 protocol)
> + * + 400 Automatic IFSD exchange as first exchange (T=1)
> + * One of the following only:
> + * + 10000 TPDU level exchanges with CCID
> + * 20000 Short APDU level exchange with CCID
> + * 40000 Short and Extended APDU level exchange with
> CCID
> + *
> + * + 100000 USB Wake up signaling supported on card
> insertion
> + * and removal. Must set bit 5 in bmAttributes in
> Configuration
> + * descriptor if 100000 is set.*/
> + 0xfe, 0x04, 0x11, 0x00,
> + /* u32 dwMaxCCIDMessageLength; For extended APDU in
> [261 + 10
> + * , 65544 + 10]. Otherwise the minimum is
> wMaxPacketSize of
> + * the Bulk-OUT endpoint */
> + 0x12, 0x00, 0x01, 0x00,
> + 0xFF, /* u8 bClassGetResponse; Significant only for CCID that
> + * offers an APDU level for exchanges. Indicates the
> default
> + * class value used by the CCID when it sends a Get
> Response
> + * command to perform the transportation of an APDU by
> T=0
> + * protocol
> + * FFh indicates that the CCID echos the class of the
> APDU.
> + */
> + 0xFF, /* u8 bClassEnvelope; EAPDU only. Envelope command for
> T=0 */
> + 0x00, 0x00, /* u16 wLcdLayout; XXYY Number of lines (XX) and chars
> per
> + * line for LCD display used for PIN entry. 0000 - no
> LCD */
> + 0x01, /* u8 bPINSupport; 01h PIN Verification,
> + * 02h PIN Modification */
> + 0x01, /* u8 bMaxCCIDBusySlots; */
> +
> + /* Interrupt-IN endpoint */
> + 0x07, /* u8 ep_bLength; */
> + /* u8 ep_bDescriptorType; Endpoint */
> + USB_DT_ENDPOINT,
> + /* u8 ep_bEndpointAddress; IN Endpoint 1 */
> + 0x80 | CCID_INT_IN_EP,
> + 0x03, /* u8 ep_bmAttributes; Interrupt */
> + 0x40, 0x00, /* u16 ep_wMaxPacketSize; */
> + 0xff, /* u8 ep_bInterval; */
> +
> + /* Bulk-In endpoint */
> + 0x07, /* u8 ep_bLength; */
> + /* u8 ep_bDescriptorType; Endpoint */
> + USB_DT_ENDPOINT,
> + /* u8 ep_bEndpointAddress; IN Endpoint 2 */
> + 0x80 | CCID_BULK_IN_EP,
> + 0x02, /* u8 ep_bmAttributes; Bulk */
> + 0x40, 0x00, /* u16 ep_wMaxPacketSize; */
> + 0x00, /* u8 ep_bInterval; */
> +
> + /* Bulk-Out endpoint */
> + 0x07, /* u8 ep_bLength; */
> + /* u8 ep_bDescriptorType; Endpoint */
> + USB_DT_ENDPOINT,
> + /* u8 ep_bEndpointAddress; OUT Endpoint 3 */
> + CCID_BULK_OUT_EP,
> + 0x02, /* u8 ep_bmAttributes; Bulk */
> + 0x40, 0x00, /* u16 ep_wMaxPacketSize; */
> + 0x00, /* u8 ep_bInterval; */
> +
> +};
> +
> +static bool ccid_has_pending_answers(USBCCIDState *s)
> +{
> + return s->pending_answers_num > 0;
> +}
> +
> +static void ccid_clear_pending_answers(USBCCIDState *s)
> +{
> + s->pending_answers_num = 0;
> + s->pending_answers_start = 0;
> + s->pending_answers_end = 0;
> +}
> +
> +static void ccid_print_pending_answers(USBCCIDState *s)
> +{
> +#ifdef DEBUG_CCID
> + answer_t *answer;
> + int i, count;
> +
> + printf("usb-ccid: pending answers:");
> + if (!ccid_has_pending_answers(s)) {
> + printf(" empty\n");
> + return;
> + }
> + for (i = s->pending_answers_start, count=s->pending_answers_num ;
> + count > 0; count--, i++) {
> + answer = &s->pending_answers[i % PENDING_ANSWERS_NUM];
> + if (count == 1) {
> + printf("%d:%d\n", answer->slot, answer->seq);
> + } else {
> + printf("%d:%d,", answer->slot, answer->seq);
> + }
> + }
> +#endif
> +}
> +
> +static void ccid_add_pending_answer(USBCCIDState *s, CCID_Header *hdr)
> +{
> + answer_t* answer;
> +
> + assert(s->pending_answers_num++ < PENDING_ANSWERS_NUM);
> + answer = &s->pending_answers[(s->pending_answers_end++) %
> PENDING_ANSWERS_NUM];
> + answer->slot = hdr->bSlot;
> + answer->seq = hdr->bSeq;
> + ccid_print_pending_answers(s);
> +}
> +
> +static void ccid_remove_pending_answer(USBCCIDState *s,
> + uint8_t *slot, uint8_t *seq)
> +{
> + answer_t *answer;
> +
> + assert(s->pending_answers_num-- > 0);
> + answer = &s->pending_answers[(s->pending_answers_start++) %
> PENDING_ANSWERS_NUM];
> + *slot = answer->slot;
> + *seq = answer->seq;
> + ccid_print_pending_answers(s);
> +}
> +
> +static void ccid_bulk_in_clear(USBCCIDState *s)
> +{
> + s->bulk_in_pending_start = 0;
> + s->bulk_in_pending_end = 0;
> + s->bulk_in_pending_num = 0;
> +}
> +
> +static void ccid_bulk_in_release(USBCCIDState *s)
> +{
> + assert(s->current_bulk_in != NULL);
> + s->current_bulk_in->pos = 0;
> + s->current_bulk_in = NULL;
> +}
> +
> +static void ccid_bulk_in_get(USBCCIDState *s)
> +{
> + if (s->current_bulk_in != NULL || s->bulk_in_pending_num == 0) {
> + return;
> + }
> + assert(s->bulk_in_pending_num > 0);
> + s->bulk_in_pending_num--;
> + s->current_bulk_in = &s->bulk_in_pending[
> + (s->bulk_in_pending_start++) % BULK_IN_PENDING_NUM];
> +}
> +
> +static void* ccid_reserve_recv_buf(USBCCIDState* s, uint16_t len)
> +{
> + bulk_in_t* bulk_in;
> +
> + DPRINTF(s, 4, "%s: QUEUE: reserve %d bytes\n", __func__, len);
> +
> + /* look for an existing element */
> + if (len > BULK_IN_BUF_SIZE) {
> + printf("usb-ccid.c: %s: len larger then max (%d>%d). discarding
> message.\n",
> + __func__, len, BULK_IN_BUF_SIZE);
> + return NULL;
> + }
> + if (s->bulk_in_pending_num >= BULK_IN_PENDING_NUM) {
> + printf("usb-ccid.c: %s: No free bulk_in buffers. discarding
> message.\n",
> + __func__);
> + return NULL;
> + }
> + bulk_in = &s->bulk_in_pending[(s->bulk_in_pending_end++) %
> BULK_IN_PENDING_NUM];
> + s->bulk_in_pending_num++;
> + bulk_in->len = len;
> + return bulk_in->data;
> +}
> +
> +static void ccid_reset(USBCCIDState *s)
> +{
> + ccid_bulk_in_clear(s);
> + ccid_clear_pending_answers(s);
> +}
> +
> +static void ccid_detach(USBCCIDState *s)
> +{
> + ccid_reset(s);
> + if (s->auto_attach == 0 && s->dev.attached) {
> + usb_device_detach(&s->dev);
> + }
> +}
> +
> +static void ccid_handle_reset(USBDevice *dev)
> +{
> + USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
> +
> + DPRINTF(s, 1, "Reset\n");
> +
> + ccid_reset(s);
> +}
> +
> +static int ccid_handle_control(USBDevice *dev, int request, int value,
> + int index, int length, uint8_t *data)
> +{
> + USBCCIDState *s = DO_UPCAST(USBCCIDState, dev, dev);
> + int ret = 0;
> +
> + DPRINTF(s, 1, "got control %x, value %x\n",request, value);
> + switch (request) {
> + case DeviceRequest | USB_REQ_GET_STATUS:
> + data[0] = (0 << USB_DEVICE_SELF_POWERED) |
> + (dev->remote_wakeup << USB_DEVICE_REMOTE_WAKEUP);
> + data[1] = 0x00;
> + ret = 2;
> + break;
> + case DeviceOutRequest | USB_REQ_CLEAR_FEATURE:
> + if (value == USB_DEVICE_REMOTE_WAKEUP) {
> + dev->remote_wakeup = 0;
> + } else {
> + goto fail;
> + }
> + ret = 0;
> + break;
> + case DeviceOutRequest | USB_REQ_SET_FEATURE:
> + if (value == USB_DEVICE_REMOTE_WAKEUP) {
> + dev->remote_wakeup = 1;
> + } else {
> + goto fail;
> + }
> + ret = 0;
> + break;
> + case DeviceOutRequest | USB_REQ_SET_ADDRESS:
> + dev->addr = value;
> + ret = 0;
> + break;
> + case DeviceRequest | USB_REQ_GET_DESCRIPTOR:
> + switch(value >> 8) {
> + case USB_DT_DEVICE:
> + memcpy(data, qemu_ccid_dev_descriptor,
> + sizeof(qemu_ccid_dev_descriptor));
> + ret = sizeof(qemu_ccid_dev_descriptor);
> + break;
> + case USB_DT_CONFIG:
> + memcpy(data, qemu_ccid_config_descriptor,
> + sizeof(qemu_ccid_config_descriptor));
> + ret = sizeof(qemu_ccid_config_descriptor);
> + break;
> + case USB_DT_STRING:
> + switch(value & 0xff) {
> + case 0:
> + /* language ids */
> + data[0] = 4;
> + data[1] = 3;
> + data[2] = 0x09;
> + data[3] = 0x04;
> + ret = 4;
> + break;
> + case 1:
> + /* vendor description */
> + ret = set_usb_string(data, CCID_VENDOR_DESCRIPTION);
> + break;
> + case 2:
> + /* product description */
> + ret = set_usb_string(data, CCID_PRODUCT_DESCRIPTION);
> + break;
> + case 3:
> + /* serial number */
> + ret = set_usb_string(data, CCID_SERIAL_NUMBER_STRING);
> + break;
> + case 4:
> + /* interface name */
> + ret = set_usb_string(data, CCID_INTERFACE_NAME);
> + break;
> + default:
> + goto fail;
> + }
> + break;
> + default:
> + goto fail;
> + }
> + break;
> + case DeviceRequest | USB_REQ_GET_CONFIGURATION:
> + data[0] = 1;
> + ret = 1;
> + break;
> + case DeviceOutRequest | USB_REQ_SET_CONFIGURATION:
> + /* Only one configuration - we just ignore the request */
> + ret = 0;
> + break;
> + case DeviceRequest | USB_REQ_GET_INTERFACE:
> + data[0] = 0;
> + ret = 1;
> + break;
> + case InterfaceOutRequest | USB_REQ_SET_INTERFACE:
> + ret = 0;
> + break;
> + case EndpointOutRequest | USB_REQ_CLEAR_FEATURE:
> + ret = 0;
> + break;
> +
> + /* Class specific requests. */
> + case InterfaceOutClass | CCID_CONTROL_ABORT:
> + DPRINTF(s, 1, "ccid_control abort UNIMPLEMENTED\n");
> + ret = USB_RET_STALL;
> + break;
> + case InterfaceInClass | CCID_CONTROL_GET_CLOCK_FREQUENCIES:
> + DPRINTF(s, 1, "ccid_control get clock frequencies UNIMPLEMENTED\n");
> + ret = USB_RET_STALL;
> + break;
> + case InterfaceInClass | CCID_CONTROL_GET_DATA_RATES:
> + DPRINTF(s, 1, "ccid_control get data rates UNIMPLEMENTED\n");
> + ret = USB_RET_STALL;
> + break;
> + default:
> + fail:
> + DPRINTF(s, 1, "got unsupported/bogus control %x, value %x\n",
> request, value);
> + ret = USB_RET_STALL;
> + break;
> + }
> + return ret;
> +}
> +
> +static bool ccid_card_inserted(USBCCIDState *s)
> +{
> + return s->bmSlotICCState & SLOT_0_STATE_MASK;
> +}
> +
> +static uint8_t ccid_card_status(USBCCIDState *s)
> +{
> + return ccid_card_inserted(s)
> + ? (s->powered ?
> + ICC_STATUS_PRESENT_ACTIVE
> + : ICC_STATUS_PRESENT_INACTIVE
> + )
> + : ICC_STATUS_NOT_PRESENT;
> +}
> +
> +static uint8_t ccid_calc_status(USBCCIDState *s)
> +{
> + /* page 55, 6.2.6, calculation of bStatus from bmICCStatus and
> + bmCommandStatus
> + */
> + uint8_t ret = ccid_card_status(s) | (s->bmCommandStatus << 6);
> + DPRINTF(s, 4, "status = %d\n", ret);
> + return ret;
> +}
> +
> +static void ccid_reset_error_status(USBCCIDState* s)
> +{
> + s->bError = ERROR_CMD_NOT_SUPPORTED;
> + s->bmCommandStatus = COMMAND_STATUS_NO_ERROR;
> +}
> +
> +static void ccid_write_slot_status(USBCCIDState* s, CCID_Header* recv)
> +{
> + CCID_SlotStatus *h = ccid_reserve_recv_buf(s, sizeof(CCID_SlotStatus));
> + if (h == NULL) {
> + return;
> + }
> + h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_SlotStatus;
> + h->b.hdr.dwLength = 0;
> + h->b.hdr.bSlot = recv->bSlot;
> + h->b.hdr.bSeq = recv->bSeq;
> + h->b.bStatus = ccid_calc_status(s);
> + h->b.bError = s->bError;
> + h->bClockStatus = CLOCK_STATUS_RUNNING;
> + ccid_reset_error_status(s);
> +}
> +
> +static void ccid_write_parameters(USBCCIDState* s, CCID_Header* recv)
> +{
> + CCID_Parameter *h;
> + uint32_t len = s->ulProtocolDataStructureSize;
> +
> + h = ccid_reserve_recv_buf(s, sizeof(CCID_Parameter) + len);
> + if (h == NULL) {
> + return;
> + }
> + h->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_Parameters;
> + h->b.hdr.dwLength = 0;
> + h->b.hdr.bSlot = recv->bSlot;
> + h->b.hdr.bSeq = recv->bSeq;
> + h->b.bStatus = ccid_calc_status(s);
> + h->b.bError = s->bError;
> + h->bProtocolNum = s->bProtocolNum;
> + memcpy(h->abProtocolDataStructure, s->abProtocolDataStructure, len);
> + ccid_reset_error_status(s);
> +}
> +
> +static void ccid_write_data_block(
> + USBCCIDState* s, uint8_t slot, uint8_t seq,
> + const uint8_t* data, uint32_t len)
> +{
> + CCID_DataBlock *p = ccid_reserve_recv_buf(s, sizeof(*p) + len);
> +
> + if (p == NULL) {
> + return;
> + }
> + p->b.hdr.bMessageType = CCID_MESSAGE_TYPE_RDR_to_PC_DataBlock;
> + p->b.hdr.dwLength = len;
This assumes that host endianess happens to match what USB uses.
- [Qemu-devel] [PATCH 0/6] usb-ccid (v7), Alon Levy, 2010/11/25
- [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Alon Levy, 2010/11/25
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Blue Swirl, 2010/11/26
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Alon Levy, 2010/11/28
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Blue Swirl, 2010/11/28
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Alon Levy, 2010/11/28
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Blue Swirl, 2010/11/28
- Re: [Qemu-devel] [PATCH 4/6] libcaccard: update configure to build and use internal libcaccard, Alon Levy, 2010/11/28