qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH 00/20] usb-ccid (v16)


From: Alon Levy
Subject: [Qemu-devel] [PATCH 00/20] usb-ccid (v16)
Date: Wed, 2 Feb 2011 22:28:00 +0200

This patchset adds three new devices, usb-ccid, ccid-card-passthru and
ccid-card-emulated, providing a CCID bus, a simple passthru protocol
implementing card requiring a client, and a standalone emulated card.

It also introduces a new directory libcaccard with CAC card emulation,
CAC is a type of ISO 7816 smart card.

Tree for pull: git://anongit.freedesktop.org/~alon/qemu usb_ccid.v16

v15-v16 changes:
 * split vscard_common introducing patch for ease of review
 * sum of commit logs for the v15-v16 commits: (whitespace fixes
    removed for space, see original commit messages in later patches)
  * usb-ccid:
   * fix abort on client answer after card remove
   * enable migration
   * remove side affect code from asserts
   * return consistent self-powered state
   * mask out reserved bits in ccid_set_parameters
   * add missing abRFU in SetParameters (no affect on linux guest)
  * vscard_common.h protocol change:
   * VSCMsgInit capabilities and magic
   * removed ReaderResponse, will use Error instead with code==VSC_SUCCESS.
   * added Flush and FlushComplete, remove Reconnect.
   * define VSCARD_MAGIC
   * added error code VSC_SUCCESS.
  * ccid-card-passthru
   * return correct size
   * return error instead of assert if client sent too large ATR
   * don't assert if client sent too large a size, but add asserts for indices 
to buffer
   * reset vscard_in indices on chardev disconnect
   * handle init from client
   * error if no chardev supplied
   * use ntoh, hton
   * eradicate reader_id_t
   * remove Reconnect usage (removed from VSCARD protocol)
   * send VSC_SUCCESS on card insert/remove and reader add/remove
  * ccid-card-emulated
   * fix error reporting in initfn

v14-v15 changes:
 * add patch with --enable-smartcard and --disable-smartcard and only
  disable ccid-card-emulated if nss not found.
 * add patch with description strings
 * s/libcaccard/libcacard/ in docs/ccid.txt

v13-v14 changes:
 - support device_del/device_add on ccid-card-* and usb-ccid
 * usb-ccid:
  * lose card reference when card device deleted
  * check slot number and deny adding a slot if one is already added.
 * ccid-card-*: use qdev_simple_unplug_cb in both emulated and passthru ccid 
cards,
   the exitfn already takes care of triggering card removal in the usb dev.
 * libcacard:
  * remove double include of config-host.mak
  * add replay of card events to libcacard to support second and more emulation
  * don't initialize more then once (doesn't support it right now, so one
   thread, NSS thread, is left when device_del is done)
  * add VCARD_EMUL_INIT_ALREADY_INITED
 * ccid-card-emulated:
  * take correct mutexes on signaling to fix deadlocks on device_del
  * allow card insertion/removal event without proper reader insertion event

v12-v13 changes:
 * libcacard:
  * fix Makefile clean to remove vscclient
  * fix double include of config-host in Makefile
 * usb-ccid: remove attach/detach logic, usb is always attached. Guest
  doesn't care if there is a reader attached with no card anyway.
 * ccid-card-passthru: don't close chr_dev on removal, makes it possible
  to use device_del/device_add to create remove/insertion for debugging.

v11-v12 changes:
 * fix out of tree build

v10-v11 changes:
 * fix last patch that removed one of the doc files.
 * updated flow table in docs/ccid.txt

v8-v10 changes:
 * usb-ccid:
  * add slot for future use (Gerd)
  * ifdef ENABLE_MIGRATION for migration support on account of usb
   migration not being ready in general. (Gerd)
 * verbosified commit messages. (Gerd)
 * put libcacard docs in libcacard commit. (Gerd)

v8-v9 changes:
 * Blue Swirl comments:
  * white space fixes
  * enabled by default, disabled only if missing nss
  * forgotten fix from v8 (don't build libcacard.so)
 * added a note about device being little endian
 * library renamed from libcaccard to libcacard
 * squashed both of libcacard patches, they touched different files anyway.

v7-v8 changes:
 * Blue Swirl comments:
  * usb-ccid: deannonymize some structs
  * usb-ccid: coding style change - answer_t and bulk_in_t fixed
  * usb-ccid: handle endianess conversion between guest and host
 * usb-ccid: s/ccid_bulk_in_copy_out/ccid_bulk_in_copy_to_guest/
 * ccid-card-emulated: fix segfault if backend not specified
 * ccid-card-emulated: let last reader inserted win
 * libcaccard: remove double vscard_common.h

v6->v7 changes:
 * external libcaccard became internal directory libcaccard
  * statically link object files into qemu
  * produce libcaccard.so for usage by external projects
  * applied coding style to new code (please check me)
  - did not use the qemu options parsing for libcaccard, since
   it seems to draw large amounts of qemu code (monitor for instance).

v5->v6 changes:
 * really remove static debug (I apologize for claiming to have done so before)

v4->v5 changes:
 * rebased to latest
 * remove static debug in card devices
 * fix --enable-smartcard to link
 * stall instead of assert when exceeding BULK_OUT_DATA_SIZE
 * make ccid_reserve_recv_buf for too large len discard message, not exit
 * make ccid_reserve_recv_buf return void*
 * fix typo
 * remove commented code in VMState

v3->v4:
 * remove ccid field in CCIDBus
 * remove static debug in bus
 * add back docs

v2->v3:
 * split into bus (usb-ccid.c, uses ccid.h) and card (ccid-card-passthru.c).
 * removed documentation (being revised).

v1->v2:
 * all QSIMPLEQ turned into fixed sized rings
 * all allocated buffers turned into fixed size buffers
 * added migration support
 * added a message to tell client qemu has migrated to ip:port
  * for lack of monitor commands ip:port are 0:0, which causes the updated
   vscclient to connect to one port higher on the same host. will add monitor
   commands in a separate patch. tested with current setup.


Alon Levy (19):
  qdev: add print_options callback
  qdev: add data pointer to Property
  qdev-properties: add PROP_TYPE_ENUM
  qdev-properties: parse_enum: don't cast a void*
  usb-ccid: add CCID bus
  usb-ccid: review fixes (v15-v16)
  introduce libcacard/vscard_common.h
  libcacard/vscard_common.h update (v15->v16)
  ccid: add passthru card device
  ccid-card-passthru: review fixes (v15->v16)
  libcacard: fixes from review (v15->v16)
  ccid: add ccid-card-emulated device (v2)
  ccid-card-emulated: use PROP_TYPE_ENUM for backend
  ccid-card-emulated: review fixes (v15->v16)
  ccid: add docs
  ccid: configure: add --enable/disable and nss only disable
  ccid: add qdev description strings
  smartcard,configure: add --enable-smartcard-nss, report only nss
  smartcard,configure: report only nss

Robert Relyea (1):
  libcacard: initial commit after coding style fixes

 Makefile                    |    6 +-
 Makefile.objs               |    7 +
 Makefile.target             |    2 +
 configure                   |   59 ++
 docs/ccid.txt               |  135 +++++
 docs/libcacard.txt          |  483 +++++++++++++++
 hw/ccid-card-emulated.c     |  551 ++++++++++++++++++
 hw/ccid-card-passthru.c     |  328 +++++++++++
 hw/ccid.h                   |   42 ++
 hw/qdev-properties.c        |   60 ++
 hw/qdev.c                   |   10 +-
 hw/qdev.h                   |   17 +
 hw/usb-ccid.c               | 1353 +++++++++++++++++++++++++++++++++++++++++++
 libcacard/Makefile          |   14 +
 libcacard/cac.c             |  411 +++++++++++++
 libcacard/cac.h             |   20 +
 libcacard/card_7816.c       |  780 +++++++++++++++++++++++++
 libcacard/card_7816.h       |   60 ++
 libcacard/card_7816t.h      |  163 ++++++
 libcacard/event.c           |  112 ++++
 libcacard/eventt.h          |   28 +
 libcacard/link_test.c       |   20 +
 libcacard/mutex.h           |   59 ++
 libcacard/passthru.c        |  612 +++++++++++++++++++
 libcacard/passthru.h        |   50 ++
 libcacard/vcard.c           |  350 +++++++++++
 libcacard/vcard.h           |   85 +++
 libcacard/vcard_emul.h      |   62 ++
 libcacard/vcard_emul_nss.c  | 1192 +++++++++++++++++++++++++++++++++++++
 libcacard/vcard_emul_type.c |   60 ++
 libcacard/vcard_emul_type.h |   29 +
 libcacard/vcardt.h          |   66 +++
 libcacard/vevent.h          |   26 +
 libcacard/vreader.c         |  526 +++++++++++++++++
 libcacard/vreader.h         |   54 ++
 libcacard/vreadert.h        |   23 +
 libcacard/vscard_common.h   |  167 ++++++
 libcacard/vscclient.c       |  743 ++++++++++++++++++++++++
 38 files changed, 8762 insertions(+), 3 deletions(-)
 create mode 100644 docs/ccid.txt
 create mode 100644 docs/libcacard.txt
 create mode 100644 hw/ccid-card-emulated.c
 create mode 100644 hw/ccid-card-passthru.c
 create mode 100644 hw/ccid.h
 create mode 100644 hw/usb-ccid.c
 create mode 100644 libcacard/Makefile
 create mode 100644 libcacard/cac.c
 create mode 100644 libcacard/cac.h
 create mode 100644 libcacard/card_7816.c
 create mode 100644 libcacard/card_7816.h
 create mode 100644 libcacard/card_7816t.h
 create mode 100644 libcacard/event.c
 create mode 100644 libcacard/eventt.h
 create mode 100644 libcacard/link_test.c
 create mode 100644 libcacard/mutex.h
 create mode 100644 libcacard/passthru.c
 create mode 100644 libcacard/passthru.h
 create mode 100644 libcacard/vcard.c
 create mode 100644 libcacard/vcard.h
 create mode 100644 libcacard/vcard_emul.h
 create mode 100644 libcacard/vcard_emul_nss.c
 create mode 100644 libcacard/vcard_emul_type.c
 create mode 100644 libcacard/vcard_emul_type.h
 create mode 100644 libcacard/vcardt.h
 create mode 100644 libcacard/vevent.h
 create mode 100644 libcacard/vreader.c
 create mode 100644 libcacard/vreader.h
 create mode 100644 libcacard/vreadert.h
 create mode 100644 libcacard/vscard_common.h
 create mode 100644 libcacard/vscclient.c

-- 
1.7.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]