[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl,
From: |
Gerhard Wiesinger |
Subject: |
Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible? |
Date: |
Sun, 20 Feb 2011 13:49:20 +0100 (CET) |
User-agent: |
Alpine 2.02 (LFD 1266 2009-07-14) |
On Sun, 20 Feb 2011, Jan Kiszka wrote:
On 2011-02-19 20:32, Gerhard Wiesinger wrote:
Hello,
http://virt.kernelnewbies.org/MacVTap
ip link add link eth1 name macvtap0 type macvtap mode bridge
ip link add link eth1 name macvlan0 type macvlan mode bridge
ifconfig macvlan0 ...
Hello Jan,
iproute2 2.6.37 is needed!
http://devresources.linuxfoundation.org/dev/iproute2/download/iproute2-2.6.37.tar.bz2
==================================================================================
1.) Only macvtap interface used
==================================================================================
For me it was just unlogically to use a VLAN type interface. Therefore I
tried the following which worked nearly:
/root/download/iproute2/iproute2-2.6.37/ip/ip link add link eth0 name macvtap0
type macvtap mode bridge
/root/download/iproute2/iproute2-2.6.37/ip/ip link set macvtap0 address
1a:46:0b:ca:bc:7b up
ip link show macvtap0
ls -l /dev/tap*
# crw-rw---- 1 root root 249, 8 Feb 20 13:07 /dev/tap8
qemu-system-x86_64 ... some params ... -net nic,model=e1000,macaddr=1a:46:0b:ca:bc:7b
-net tap,fd=3 3<>/dev/tap8
Booting Knoppix 6.2 with ping is ok, MAC address is also correct on second
host.
Only problem is that from host to guest no networking is possible (only
from guest to other host).
Any ideas? I guess some forwarding is missing? iptables forward missing?
==================================================================================
2.) Only macvtap interface used
==================================================================================
/root/download/iproute2/iproute2-2.6.37/ip/ip link add link eth0 name macvtap0
type macvtap mode bridge
/root/download/iproute2/iproute2-2.6.37/ip/ip link set macvtap0 address
1a:46:0b:ca:bc:7b up
#/root/download/iproute2/iproute2-2.6.37/ip/ip link add link eth0 name macvlan0
type macvlan mode bridge
#/root/download/iproute2/iproute2-2.6.37/ip/ip link set macvlan0 address
1a:46:0b:ca:bc:7c up
ip link show macvtap0
ip link show macvlan0
ls -l /dev/tap*
# crw-rw---- 1 root root 249, 8 Feb 20 13:07 /dev/tap8
# No further TAP device created! (Reason why it doesn't work?)
# 7c MAC is used!?
qemu-system-x86_64 ... some params ... -net nic,model=e1000,macaddr=1a:46:0b:ca:bc:7c
-net tap,fd=3 3<>/dev/tap8
Booting Knoppix 6.2 without any networking, eth0 in guest has 7c MAC
address.
Any ideas?
==================================================================================
Thnx.
Ciao,
Gerhard
--
http://www.wiesinger.com/
- [Qemu-devel] Network bridging without adding bridge with brctl, possible?, Gerhard Wiesinger, 2011/02/19
- [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Jan Kiszka, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?,
Gerhard Wiesinger <=
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Jan Kiszka, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Gerhard Wiesinger, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Jan Kiszka, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Gerhard Wiesinger, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Arnd Bergmann, 2011/02/20
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Gerhard Wiesinger, 2011/02/21
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Jan Kiszka, 2011/02/21
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Arnd Bergmann, 2011/02/21
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Gerhard Wiesinger, 2011/02/23
- Re: [Qemu-devel] Re: Network bridging without adding bridge with brctl, possible?, Jan Kiszka, 2011/02/23