[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v4 1/2] rtl8139: add vlan tag extraction
From: |
Benjamin Poirier |
Subject: |
[Qemu-devel] [PATCH v4 1/2] rtl8139: add vlan tag extraction |
Date: |
Wed, 2 Mar 2011 17:36:19 -0500 |
Add support to the emulated hardware to extract vlan tags in packets
going from the network to the guest.
Signed-off-by: Benjamin Poirier <address@hidden>
Cc: Igor V. Kovalenko <address@hidden>
Cc: Jason Wang <address@hidden>
Cc: Michael S. Tsirkin <address@hidden>
--
AFAIK, extraction is optional to get vlans working. The driver
requests rx detagging but should not assume that it was done. Under
Linux, the mac layer will catch the vlan ethertype. I only added this
part for completeness (to emulate the hardware more truthfully...)
---
hw/rtl8139.c | 100 +++++++++++++++++++++++++++++++++++++++++++++++-----------
1 files changed, 81 insertions(+), 19 deletions(-)
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index a22530c..6e770bd 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -68,6 +68,16 @@
#if defined(RTL8139_CALCULATE_RXCRC)
/* For crc32 */
#include <zlib.h>
+
+static inline uLong rtl8139_crc32(uLong crc, const Bytef *buf, uInt len)
+{
+ return crc32(crc, buf, len);
+}
+#else
+static inline uLong rtl8139_crc32(uLong crc, const Bytef *buf, uInt len)
+{
+ return 0;
+}
#endif
#define SET_MASKED(input, mask, curr) \
@@ -77,6 +87,14 @@
#define MOD2(input, size) \
( ( input ) & ( size - 1 ) )
+#define ETHER_ADDR_LEN 6
+#define ETHER_TYPE_LEN 2
+#define ETHER_HDR_LEN (ETHER_ADDR_LEN * 2 + ETHER_TYPE_LEN)
+#define ETHERTYPE_VLAN 0x8100
+
+#define VLAN_TCI_LEN 2
+#define VLAN_HDR_LEN (ETHER_TYPE_LEN + VLAN_TCI_LEN)
+
#if defined (DEBUG_RTL8139)
# define DEBUG_PRINT(x) do { printf x ; } while (0)
#else
@@ -818,10 +836,13 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
{
RTL8139State *s = DO_UPCAST(NICState, nc, nc)->opaque;
int size = size_;
+ const uint8_t *dot1q_buf;
+ const uint8_t *next_part;
+ size_t next_part_size;
uint32_t packet_header = 0;
- uint8_t buf1[60];
+ uint8_t buf1[MIN_BUF_SIZE];
static const uint8_t broadcast_macaddr[6] =
{ 0xff, 0xff, 0xff, 0xff, 0xff, 0xff };
@@ -933,14 +954,6 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
}
}
- /* if too small buffer, then expand it */
- if (size < MIN_BUF_SIZE) {
- memcpy(buf1, buf, size);
- memset(buf1 + size, 0, MIN_BUF_SIZE - size);
- buf = buf1;
- size = MIN_BUF_SIZE;
- }
-
if (rtl8139_cp_receiver_enabled(s))
{
DEBUG_PRINT(("RTL8139: in C+ Rx mode ================\n"));
@@ -1001,6 +1014,41 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
uint32_t rx_space = rxdw0 & CP_RX_BUFFER_SIZE_MASK;
+ /* write VLAN info to descriptor variables */
+ /* next_part starts right after the vlan header (if any), at the
+ * ethertype for the payload */
+ next_part = &buf[ETHER_ADDR_LEN * 2];
+ if (s->CpCmd & CPlusRxVLAN && be16_to_cpup((uint16_t *)
+ &buf[ETHER_ADDR_LEN * 2]) == ETHERTYPE_VLAN) {
+ dot1q_buf = &buf[ETHER_ADDR_LEN * 2];
+ next_part += VLAN_HDR_LEN;
+ size -= VLAN_HDR_LEN;
+
+ rxdw1 &= ~CP_RX_VLAN_TAG_MASK;
+ /* BE + ~le_to_cpu()~ + cpu_to_le() = BE */
+ rxdw1 |= CP_RX_TAVA | le16_to_cpup((uint16_t *)
+ &buf[ETHER_HDR_LEN]);
+
+ DEBUG_PRINT(("RTL8139: C+ Rx mode : extracted vlan tag with tci: "
+ "%u\n", be16_to_cpup((uint16_t *) &buf[ETHER_HDR_LEN])));
+ } else {
+ /* reset VLAN tag flag */
+ rxdw1 &= ~CP_RX_TAVA;
+ dot1q_buf = NULL;
+ }
+ next_part_size = buf + size_ - next_part;
+
+ /* if too small buffer, then expand it */
+ if (size < MIN_BUF_SIZE) {
+ size_t tmp_size = MIN_BUF_SIZE - ETHER_ADDR_LEN * 2;
+
+ memcpy(buf1, next_part, next_part_size);
+ memset(buf1 + next_part_size, 0, tmp_size - next_part_size);
+ next_part = buf1;
+ next_part_size = tmp_size;
+ size = MIN_BUF_SIZE;
+ }
+
/* TODO: scatter the packet over available receive ring descriptors
space */
if (size+4 > rx_space)
@@ -1022,7 +1070,18 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
target_phys_addr_t rx_addr = rtl8139_addr64(rxbufLO, rxbufHI);
/* receive/copy to target memory */
- cpu_physical_memory_write( rx_addr, buf, size );
+ if (unlikely(dot1q_buf)) {
+ cpu_physical_memory_write(rx_addr, buf, 2 * ETHER_ADDR_LEN);
+ val = rtl8139_crc32(0, buf, 2 * ETHER_ADDR_LEN);
+ val = rtl8139_crc32(val, dot1q_buf, VLAN_HDR_LEN);
+ cpu_physical_memory_write(rx_addr + 2 * ETHER_ADDR_LEN, next_part,
+ next_part_size);
+ val = rtl8139_crc32(val, buf + 2 * ETHER_ADDR_LEN,
+ next_part_size);
+ } else {
+ cpu_physical_memory_write(rx_addr, buf, size);
+ val = rtl8139_crc32(0, buf, size);
+ }
if (s->CpCmd & CPlusRxChkSum)
{
@@ -1031,9 +1090,7 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
/* write checksum */
#if defined (RTL8139_CALCULATE_RXCRC)
- val = cpu_to_le32(crc32(0, buf, size));
-#else
- val = 0;
+ val = cpu_to_le32(val);
#endif
cpu_physical_memory_write( rx_addr+size, (uint8_t *)&val, 4);
@@ -1079,9 +1136,6 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
rxdw0 &= ~CP_RX_BUFFER_SIZE_MASK;
rxdw0 |= (size+4);
- /* reset VLAN tag flag */
- rxdw1 &= ~CP_RX_TAVA;
-
/* update ring data */
val = cpu_to_le32(rxdw0);
cpu_physical_memory_write(cplus_rx_ring_desc, (uint8_t *)&val, 4);
@@ -1108,6 +1162,14 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
{
DEBUG_PRINT(("RTL8139: in ring Rx mode ================\n"));
+ /* if too small buffer, then expand it */
+ if (size < MIN_BUF_SIZE) {
+ memcpy(buf1, buf, size);
+ memset(buf1 + size, 0, MIN_BUF_SIZE - size);
+ buf = buf1;
+ size = MIN_BUF_SIZE;
+ }
+
/* begin ring receiver mode */
int avail = MOD2(s->RxBufferSize + s->RxBufPtr - s->RxBufAddr,
s->RxBufferSize);
@@ -1133,13 +1195,13 @@ static ssize_t rtl8139_do_receive(VLANClientState *nc,
const uint8_t *buf, size_
rtl8139_write_buffer(s, (uint8_t *)&val, 4);
+ /* receive/copy to target memory */
rtl8139_write_buffer(s, buf, size);
+ val = rtl8139_crc32(0, buf, size);
/* write checksum */
#if defined (RTL8139_CALCULATE_RXCRC)
- val = cpu_to_le32(crc32(0, buf, size));
-#else
- val = 0;
+ val = cpu_to_le32(val);
#endif
rtl8139_write_buffer(s, (uint8_t *)&val, 4);
--
1.7.2.3