[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] Make VNC support optional
|
From: |
Jes . Sorensen |
|
Subject: |
[Qemu-devel] [PATCH] Make VNC support optional |
|
Date: |
Fri, 11 Mar 2011 13:38:54 +0100 |
From: Jes Sorensen <address@hidden>
Per default VNC is enabled.
Signed-off-by: Jes Sorensen <address@hidden>
---
Makefile.objs | 19 ++++++++++---------
configure | 37 +++++++++++++++++++++++++------------
monitor.c | 16 ++++++++++++++++
vl.c | 10 +++++++++-
4 files changed, 60 insertions(+), 22 deletions(-)
diff --git a/Makefile.objs b/Makefile.objs
index 9e98a66..58388e2 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -127,19 +127,20 @@ common-obj-y += $(addprefix audio/, $(audio-obj-y))
ui-obj-y += keymaps.o
ui-obj-$(CONFIG_SDL) += sdl.o sdl_zoom.o x_keymap.o
ui-obj-$(CONFIG_CURSES) += curses.o
-ui-obj-y += vnc.o d3des.o
-ui-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
-ui-obj-y += vnc-enc-tight.o vnc-palette.o
-ui-obj-y += vnc-enc-zrle.o
-ui-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
-ui-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
-ui-obj-$(CONFIG_COCOA) += cocoa.o
+vnc-obj-y += vnc.o d3des.o
+vnc-obj-y += vnc-enc-zlib.o vnc-enc-hextile.o
+vnc-obj-y += vnc-enc-tight.o vnc-palette.o
+vnc-obj-y += vnc-enc-zrle.o
+vnc-obj-$(CONFIG_VNC_TLS) += vnc-tls.o vnc-auth-vencrypt.o
+vnc-obj-$(CONFIG_VNC_SASL) += vnc-auth-sasl.o
+vnc-obj-$(CONFIG_COCOA) += cocoa.o
ifdef CONFIG_VNC_THREAD
-ui-obj-y += vnc-jobs-async.o
+vnc-obj-y += vnc-jobs-async.o
else
-ui-obj-y += vnc-jobs-sync.o
+vnc-obj-y += vnc-jobs-sync.o
endif
common-obj-y += $(addprefix ui/, $(ui-obj-y))
+common-obj-$(CONFIG_VNC) += $(addprefix ui/, $(vnc-obj-y))
common-obj-y += iov.o acl.o
common-obj-$(CONFIG_THREAD) += qemu-thread.o
diff --git a/configure b/configure
index 39cdf2b..a64b750 100755
--- a/configure
+++ b/configure
@@ -117,6 +117,7 @@ kvm=""
kvm_para=""
nptl=""
sdl=""
+vnc="yes"
sparse="no"
uuid=""
vde=""
@@ -539,6 +540,10 @@ for opt do
;;
--enable-sdl) sdl="yes"
;;
+ --disable-vnc) vnc="no"
+ ;;
+ --enable-vnc) vnc="yes"
+ ;;
--fmod-lib=*) fmod_lib="$optarg"
;;
--fmod-inc=*) fmod_inc="$optarg"
@@ -836,6 +841,8 @@ echo " --disable-strip disable stripping binaries"
echo " --disable-werror disable compilation abort on warning"
echo " --disable-sdl disable SDL"
echo " --enable-sdl enable SDL"
+echo " --disable-vnc disable VNC"
+echo " --enable-vnc enable VNC"
echo " --enable-cocoa enable COCOA (Mac OS X only)"
echo " --audio-drv-list=LIST set audio drivers list:"
echo " Available drivers: $audio_possible_drivers"
@@ -1273,7 +1280,7 @@ fi
##########################################
# VNC TLS detection
-if test "$vnc_tls" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_tls" != "no" ; then
cat > $TMPC <<EOF
#include <gnutls/gnutls.h>
int main(void) { gnutls_session_t s; gnutls_init(&s, GNUTLS_SERVER); return 0;
}
@@ -1293,7 +1300,7 @@ fi
##########################################
# VNC SASL detection
-if test "$vnc_sasl" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_sasl" != "no" ; then
cat > $TMPC <<EOF
#include <sasl/sasl.h>
#include <stdio.h>
@@ -1315,7 +1322,7 @@ fi
##########################################
# VNC JPEG detection
-if test "$vnc_jpeg" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_jpeg" != "no" ; then
cat > $TMPC <<EOF
#include <stdio.h>
#include <jpeglib.h>
@@ -1336,7 +1343,7 @@ fi
##########################################
# VNC PNG detection
-if test "$vnc_png" != "no" ; then
+if test "$vnc" = "yes" -a "$vnc_png" != "no" ; then
cat > $TMPC <<EOF
//#include <stdio.h>
#include <png.h>
@@ -2495,11 +2502,14 @@ echo "Audio drivers $audio_drv_list"
echo "Extra audio cards $audio_card_list"
echo "Block whitelist $block_drv_whitelist"
echo "Mixer emulation $mixemu"
-echo "VNC TLS support $vnc_tls"
-echo "VNC SASL support $vnc_sasl"
-echo "VNC JPEG support $vnc_jpeg"
-echo "VNC PNG support $vnc_png"
-echo "VNC thread $vnc_thread"
+echo "VNC support $vnc"
+if test "$vnc" = "yes" ; then
+ echo "VNC TLS support $vnc_tls"
+ echo "VNC SASL support $vnc_sasl"
+ echo "VNC JPEG support $vnc_jpeg"
+ echo "VNC PNG support $vnc_png"
+ echo "VNC thread $vnc_thread"
+fi
if test -n "$sparc_cpu"; then
echo "Target Sparc Arch $sparc_cpu"
fi
@@ -2649,6 +2659,9 @@ echo "CONFIG_BDRV_WHITELIST=$block_drv_whitelist" >>
$config_host_mak
if test "$mixemu" = "yes" ; then
echo "CONFIG_MIXEMU=y" >> $config_host_mak
fi
+if test "$vnc" = "yes" ; then
+ echo "CONFIG_VNC=y" >> $config_host_mak
+fi
if test "$vnc_tls" = "yes" ; then
echo "CONFIG_VNC_TLS=y" >> $config_host_mak
echo "VNC_TLS_CFLAGS=$vnc_tls_cflags" >> $config_host_mak
@@ -2657,15 +2670,15 @@ if test "$vnc_sasl" = "yes" ; then
echo "CONFIG_VNC_SASL=y" >> $config_host_mak
echo "VNC_SASL_CFLAGS=$vnc_sasl_cflags" >> $config_host_mak
fi
-if test "$vnc_jpeg" != "no" ; then
+if test "$vnc_jpeg" = "yes" ; then
echo "CONFIG_VNC_JPEG=y" >> $config_host_mak
echo "VNC_JPEG_CFLAGS=$vnc_jpeg_cflags" >> $config_host_mak
fi
-if test "$vnc_png" != "no" ; then
+if test "$vnc_png" = "yes" ; then
echo "CONFIG_VNC_PNG=y" >> $config_host_mak
echo "VNC_PNG_CFLAGS=$vnc_png_cflags" >> $config_host_mak
fi
-if test "$vnc_thread" != "no" ; then
+if test "$vnc_thread" = "yes" ; then
echo "CONFIG_VNC_THREAD=y" >> $config_host_mak
echo "CONFIG_THREAD=y" >> $config_host_mak
fi
diff --git a/monitor.c b/monitor.c
index 22ae3bb..4425315 100644
--- a/monitor.c
+++ b/monitor.c
@@ -441,6 +441,7 @@ void monitor_protocol_event(MonitorEvent event, QObject
*data)
case QEVENT_RESUME:
event_name = "RESUME";
break;
+#ifdef CONFIG_VNC
case QEVENT_VNC_CONNECTED:
event_name = "VNC_CONNECTED";
break;
@@ -450,6 +451,7 @@ void monitor_protocol_event(MonitorEvent event, QObject
*data)
case QEVENT_VNC_DISCONNECTED:
event_name = "VNC_DISCONNECTED";
break;
+#endif
case QEVENT_BLOCK_IO_ERROR:
event_name = "BLOCK_IO_ERROR";
break;
@@ -1016,6 +1018,7 @@ static int do_quit(Monitor *mon, const QDict *qdict,
QObject **ret_data)
return 0;
}
+#ifdef CONFIG_VNC
static int change_vnc_password(const char *password)
{
if (!password || !password[0]) {
@@ -1062,6 +1065,7 @@ static int do_change_vnc(Monitor *mon, const char
*target, const char *arg)
return 0;
}
+#endif
/**
* do_change(): Change a removable medium, or VNC configuration
@@ -1073,11 +1077,15 @@ static int do_change(Monitor *mon, const QDict *qdict,
QObject **ret_data)
const char *arg = qdict_get_try_str(qdict, "arg");
int ret;
+#ifdef CONFIG_VNC
if (strcmp(device, "vnc") == 0) {
ret = do_change_vnc(mon, target, arg);
} else {
+#endif
ret = do_change_block(mon, device, target, arg);
+#ifdef CONFIG_VNC
}
+#endif
return ret;
}
@@ -1119,6 +1127,7 @@ static int set_password(Monitor *mon, const QDict *qdict,
QObject **ret_data)
return 0;
}
+#ifdef CONFIG_VNC
if (strcmp(protocol, "vnc") == 0) {
if (fail_if_connected || disconnect_if_connected) {
/* vnc supports "connected=keep" only */
@@ -1134,6 +1143,7 @@ static int set_password(Monitor *mon, const QDict *qdict,
QObject **ret_data)
}
return 0;
}
+#endif
qerror_report(QERR_INVALID_PARAMETER, "protocol");
return -1;
@@ -1170,6 +1180,7 @@ static int expire_password(Monitor *mon, const QDict
*qdict, QObject **ret_data)
return 0;
}
+#ifdef CONFIG_VNC
if (strcmp(protocol, "vnc") == 0) {
rc = vnc_display_pw_expire(NULL, when);
if (rc != 0) {
@@ -1178,6 +1189,7 @@ static int expire_password(Monitor *mon, const QDict
*qdict, QObject **ret_data)
}
return 0;
}
+#endif
qerror_report(QERR_INVALID_PARAMETER, "protocol");
return -1;
@@ -3002,6 +3014,7 @@ static const mon_cmd_t info_cmds[] = {
.user_print = do_info_mice_print,
.mhandler.info_new = do_info_mice,
},
+#ifdef CONFIG_VNC
{
.name = "vnc",
.args_type = "",
@@ -3010,6 +3023,7 @@ static const mon_cmd_t info_cmds[] = {
.user_print = do_info_vnc_print,
.mhandler.info_new = do_info_vnc,
},
+#endif
#if defined(CONFIG_SPICE)
{
.name = "spice",
@@ -3199,6 +3213,7 @@ static const mon_cmd_t qmp_query_cmds[] = {
.user_print = do_info_mice_print,
.mhandler.info_new = do_info_mice,
},
+#ifdef CONFIG_VNC
{
.name = "vnc",
.args_type = "",
@@ -3207,6 +3222,7 @@ static const mon_cmd_t qmp_query_cmds[] = {
.user_print = do_info_vnc_print,
.mhandler.info_new = do_info_vnc,
},
+#endif
#if defined(CONFIG_SPICE)
{
.name = "spice",
diff --git a/vl.c b/vl.c
index a1faf65..08a1d72 100644
--- a/vl.c
+++ b/vl.c
@@ -208,7 +208,9 @@ int smp_cpus = 1;
int max_cpus = 0;
int smp_cores = 1;
int smp_threads = 1;
+#ifdef CONFIG_VNC
const char *vnc_display;
+#endif
int shmem_video = 0;
int acpi_enabled = 1;
int no_hpet = 0;
@@ -1940,7 +1942,9 @@ int main(int argc, char **argv, char **envp)
int tb_size;
const char *pid_file = NULL;
const char *incoming = NULL;
+#ifdef CONFIG_VNC
int show_vnc_port = 0;
+#endif
int defconfig = 1;
#ifdef CONFIG_SIMPLE_TRACE
@@ -2585,10 +2589,12 @@ int main(int argc, char **argv, char **envp)
exit(1);
}
break;
+#ifdef CONFIG_VNC
case QEMU_OPTION_vnc:
display_remote++;
vnc_display = optarg;
break;
+#endif
case QEMU_OPTION_shmem_video:
shmem_video = 1;
break;
@@ -3049,7 +3055,7 @@ int main(int argc, char **argv, char **envp)
if (display_type == DT_DEFAULT && !display_remote) {
#if defined(CONFIG_SDL) || defined(CONFIG_COCOA)
display_type = DT_SDL;
-#else
+#elif defined(CONFIG_VNC)
vnc_display = "localhost:0,to=99";
show_vnc_port = 1;
#endif
@@ -3078,6 +3084,7 @@ int main(int argc, char **argv, char **envp)
break;
}
+#ifdef CONFIG_VNC
/* init remote displays */
if (vnc_display) {
vnc_display_init(ds);
@@ -3088,6 +3095,7 @@ int main(int argc, char **argv, char **envp)
printf("VNC server running on `%s'\n", vnc_display_local_addr(ds));
}
}
+#endif
#ifdef CONFIG_SPICE
if (using_spice && !qxl_enabled) {
qemu_spice_display_init(ds);
--
1.7.4
- [Qemu-devel] [PATCH] Make VNC support optional,
Jes . Sorensen <=