[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] ioapic: when switches to level trigger mode, interr
From: |
Isaku Yamahata |
Subject: |
[Qemu-devel] [PATCH] ioapic: when switches to level trigger mode, interrupts raised repeatedly. |
Date: |
Wed, 16 Mar 2011 18:05:01 +0900 |
- the trigger mode is edge at first
- During initializatoin, the interrupt is raised as edge which is masked.
The corresponding bit of irr is set.
- Then the mode is switched to level and it's unmasked.
- the bit of irr is set, so the interrupt is raised repeatedly by
ioapic_service().
- OS considers that the irq line is broken and falls back to polling mode.
This patch fixes the issues.
After raising edige, clear the bit of irr.
> Bringing up interface eth0:
> Determining IP information for eth0...irq 18: nobody cared (try booting with
> the "irqpoll" option)
> Pid: 4126, comm: ip Not tainted 2.6.38-rc7 #1
> Call Trace:
> <IRQ> [<ffffffff8105b009>] ? __report_bad_irq+0x38/0x87
> [<ffffffff8105b177>] ? note_interrupt+0x11f/0x188
> [<ffffffff8105bacf>] ? handle_fasteoi_irq+0xa7/0xd1
> [<ffffffff810046ff>] ? handle_irq+0x83/0x8c
> [<ffffffff81003eb9>] ? do_IRQ+0x48/0xaf
> [<ffffffff81300513>] ? ret_from_intr+0x0/0xe
> [<ffffffff81031ab8>] ? __do_softirq+0x4f/0x114
> [<ffffffff81002d6c>] ? call_softirq+0x1c/0x28
> [<ffffffff81004647>] ? do_softirq+0x33/0x68
> [<ffffffff810316fb>] ? irq_exit+0x36/0x38
> [<ffffffff81015f2c>] ? smp_apic_timer_interrupt+0x88/0x96
> [<ffffffff81002853>] ? apic_timer_interrupt+0x13/0x20
> <EOI> [<ffffffff810177ed>] ? __ioapic_set_affinity+0x68/0x7c
> [<ffffffff813000f0>] ? _raw_spin_unlock_irqrestore+0x8/0xa
> [<ffffffff8105a84f>] ? __setup_irq+0x224/0x2cb
> [<ffffffff8120e3c5>] ? e1000_intr+0x0/0x103
> [<ffffffff8105a9c7>] ? request_threaded_irq+0xd1/0x114
> [<ffffffff8120e396>] ? e1000_request_irq+0x34/0x63
> [<ffffffff8121237d>] ? e1000_open+0x81/0x11f
> [<ffffffff8129097c>] ? call_netdevice_notifiers+0x45/0x4a
> [<ffffffff81290d8d>] ? __dev_open+0x97/0xc4
> [<ffffffff8128e9c5>] ? __dev_change_flags+0xb9/0x13d
> [<ffffffff81290cc1>] ? dev_change_flags+0x1c/0x51
> [<ffffffff812d0542>] ? devinet_ioctl+0x26e/0x594
> [<ffffffff812d174c>] ? inet_ioctl+0x92/0xaa
> [<ffffffff81281d75>] ? T.1003+0x13/0x32
> [<ffffffff81282152>] ? sock_ioctl+0x1f2/0x1ff
> [<ffffffff810ae2d3>] ? do_vfs_ioctl+0x498/0x4e7
> [<ffffffff81281203>] ? sock_alloc_file+0xb3/0x115
> [<ffffffff8109f79f>] ? fd_install+0x31/0x5d
> [<ffffffff810ae364>] ? sys_ioctl+0x42/0x65
> [<ffffffff81001f3b>] ? system_call_fastpath+0x16/0x1b
> handlers:
> [<ffffffff8120e3c5>] (e1000_intr+0x0/0x103)
> Disabling IRQ #18
Signed-off-by: Isaku Yamahata <address@hidden>
---
hw/ioapic.c | 1 +
1 files changed, 1 insertions(+), 0 deletions(-)
diff --git a/hw/ioapic.c b/hw/ioapic.c
index 569327d..8557e5c 100644
--- a/hw/ioapic.c
+++ b/hw/ioapic.c
@@ -164,6 +164,7 @@ static void ioapic_set_irq(void *opaque, int vector, int
level)
if (level) {
s->irr |= mask;
ioapic_service(s);
+ s->irr &= ~mask;
}
}
}
--
1.7.1.1
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH] ioapic: when switches to level trigger mode, interrupts raised repeatedly.,
Isaku Yamahata <=