This extends the "pseries" (PAPR) machine to include a virtual IO bus
supporting the PAPR defined hypercall based virtual IO mechanisms.
So far only one VIO device is provided, the vty / vterm, providing
a full console (polled only, for now).
Signed-off-by: David Gibson<address@hidden>
---
Makefile.target | 3 +-
hw/spapr.c | 47 ++++++++-----
hw/spapr.h | 3 +
hw/spapr_vio.c | 212 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
hw/spapr_vio.h | 50 +++++++++++++
hw/spapr_vty.c | 145 +++++++++++++++++++++++++++++++++++++
6 files changed, 441 insertions(+), 19 deletions(-)
create mode 100644 hw/spapr_vio.c
create mode 100644 hw/spapr_vio.h
create mode 100644 hw/spapr_vty.c
diff --git a/Makefile.target b/Makefile.target
index e6a7557..3f2b235 100644
--- a/Makefile.target
+++ b/Makefile.target
@@ -232,7 +232,8 @@ obj-ppc-y += ppc_oldworld.o
# NewWorld PowerMac
obj-ppc-y += ppc_newworld.o
# IBM pSeries (sPAPR)
-obj-ppc-y += spapr.o spapr_hcall.o
+obj-ppc-y += spapr.o spapr_hcall.o spapr_vio.o
+obj-ppc-y += spapr_vty.o
# PowerPC 4xx boards
obj-ppc-y += ppc4xx_devs.o ppc4xx_pci.o ppc405_uc.o ppc405_boards.o
obj-ppc-y += ppc440.o ppc440_bamboo.o
diff --git a/hw/spapr.c b/hw/spapr.c
index 8b4e16e..25e4a9e 100644
--- a/hw/spapr.c
+++ b/hw/spapr.c
@@ -25,7 +25,6 @@
*
*/
#include "sysemu.h"
-#include "qemu-char.h"
#include "hw.h"
#include "elf.h"
@@ -34,6 +33,7 @@
#include "hw/loader.h"
#include "hw/spapr.h"
+#include "hw/spapr_vio.h"
#include<libfdt.h>
@@ -58,6 +58,7 @@ static void *spapr_create_fdt(int *fdt_size, ram_addr_t
ramsize,
uint32_t end_prop = cpu_to_be32(initrd_base + initrd_size);
int i;
char *modelname;
+ int ret;
#define _FDT(exp) \
do { \
@@ -152,9 +153,29 @@ static void *spapr_create_fdt(int *fdt_size, ram_addr_t
ramsize,
_FDT((fdt_end_node(fdt)));
+ /* vdevice */
+ _FDT((fdt_begin_node(fdt, "vdevice")));
+
+ _FDT((fdt_property_string(fdt, "device_type", "vdevice")));
+ _FDT((fdt_property_string(fdt, "compatible", "IBM,vdevice")));
+ _FDT((fdt_property_cell(fdt, "#address-cells", 0x1)));
+ _FDT((fdt_property_cell(fdt, "#size-cells", 0x0)));
+
+ _FDT((fdt_end_node(fdt)));
+
_FDT((fdt_end_node(fdt))); /* close root node */
_FDT((fdt_finish(fdt)));
+ /* re-expand to allow for further tweaks */
+ _FDT((fdt_open_into(fdt, fdt, FDT_MAX_SIZE)));
+
+ ret = spapr_populate_vdevice(spapr->vio_bus, fdt);
+ if (ret< 0) {
+ fprintf(stderr, "couldn't setup vio devices in fdt\n");
+ }
+
+ _FDT((fdt_pack(fdt)));
+
if (fdt_size) {
*fdt_size = fdt_totalsize(fdt);
}
@@ -173,21 +194,6 @@ static void emulate_spapr_hypercall(CPUState *env, void
*opaque)
env->gpr[3],&env->gpr[4]);
}
-/* FIXME: hack until we implement the proper VIO console */
-static target_ulong h_put_term_char(CPUState *env, sPAPREnvironment *spapr,
- target_ulong opcode, target_ulong *args)
-{
- uint8_t buf[16];
-
- stq_p(buf, args[2]);
- stq_p(buf + 8, args[3]);
-
- qemu_chr_write(serial_hds[0], buf, args[1]);
-
- return 0;
-}
-
-
/* pSeries LPAR / sPAPR hardware init */
static void ppc_spapr_init(ram_addr_t ram_size,
const char *boot_device,
@@ -242,7 +248,13 @@ static void ppc_spapr_init(ram_addr_t ram_size,
ram_offset = qemu_ram_alloc(NULL, "ppc_spapr.ram", ram_size);
cpu_register_physical_memory(0, ram_size, ram_offset);
- spapr_register_hypercall(H_PUT_TERM_CHAR, h_put_term_char);
+ spapr->vio_bus = spapr_vio_bus_init();
+
+ for (i = 0; i< MAX_SERIAL_PORTS; i++) {
+ if (serial_hds[i]) {
+ spapr_vty_create(spapr->vio_bus, i, serial_hds[i]);
+ }
+ }
if (kernel_filename) {
uint64_t lowaddr = 0;
@@ -274,7 +286,6 @@ static void ppc_spapr_init(ram_addr_t ram_size,
initrd_base = 0;
initrd_size = 0;
}
-
} else {
fprintf(stderr, "pSeries machine needs -kernel for now");
exit(1);
diff --git a/hw/spapr.h b/hw/spapr.h
index 9e63a19..47bf2ef 100644
--- a/hw/spapr.h
+++ b/hw/spapr.h
@@ -1,7 +1,10 @@
#if !defined (__HW_SPAPR_H__)
#define __HW_SPAPR_H__
+struct VIOsPAPRBus;
+
typedef struct sPAPREnvironment {
+ struct VIOsPAPRBus *vio_bus;
} sPAPREnvironment;
#define H_SUCCESS 0
diff --git a/hw/spapr_vio.c b/hw/spapr_vio.c
new file mode 100644
index 0000000..0ed63f4
--- /dev/null
+++ b/hw/spapr_vio.c
@@ -0,0 +1,212 @@
+/*
+ * QEMU sPAPR VIO code
+ *
+ * Copyright (c) 2010 David Gibson, IBM Corporation<address@hidden>
+ * Based on the s390 virtio bus code:
+ * Copyright (c) 2009 Alexander Graf<address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see<http://www.gnu.org/licenses/>.
+ */
+
+#include "hw.h"
+#include "sysemu.h"
+#include "boards.h"
+#include "monitor.h"
+#include "loader.h"
+#include "elf.h"
+#include "hw/sysbus.h"
+#include "kvm.h"
+#include "device_tree.h"
+
+#include "hw/spapr.h"
+#include "hw/spapr_vio.h"
+
+#ifdef CONFIG_FDT
+#include<libfdt.h>
+#endif /* CONFIG_FDT */
+
+/* #define DEBUG_SPAPR */
+
+#ifdef DEBUG_SPAPR
+#define dprintf(fmt, ...) \
+ do { fprintf(stderr, fmt, ## __VA_ARGS__); } while (0)
+#else
+#define dprintf(fmt, ...) \
+ do { } while (0)
+#endif
+
+static struct BusInfo spapr_vio_bus_info = {
+ .name = "spapr-vio",
+ .size = sizeof(VIOsPAPRBus),
+};
+
+VIOsPAPRDevice *spapr_vio_find_by_reg(VIOsPAPRBus *bus, uint32_t reg)
+{
+ DeviceState *qdev;
+ VIOsPAPRDevice *dev = NULL;
+
+ QLIST_FOREACH(qdev,&bus->bus.children, sibling) {
+ dev = (VIOsPAPRDevice *)qdev;
+ if (dev->reg == reg) {
+ break;
+ }
+ }
+
+ return dev;
+}
+
+#ifdef CONFIG_FDT
+static int vio_make_devnode(VIOsPAPRDevice *dev,
+ void *fdt)
+{
+ VIOsPAPRDeviceInfo *info = (VIOsPAPRDeviceInfo *)dev->qdev.info;
+ int vdevice_off, node_off;
+ int ret;
+
+ vdevice_off = fdt_path_offset(fdt, "/vdevice");
+ if (vdevice_off< 0) {
+ return vdevice_off;
+ }
+
+ node_off = fdt_add_subnode(fdt, vdevice_off, dev->qdev.id);
+ if (node_off< 0) {
+ return node_off;
+ }
+
+ ret = fdt_setprop_cell(fdt, node_off, "reg", dev->reg);
+ if (ret< 0) {
+ return ret;
+ }
+
+ if (info->dt_type) {
+ ret = fdt_setprop_string(fdt, node_off, "device_type",
+ info->dt_type);
+ if (ret< 0) {
+ return ret;
+ }
+ }
+
+ if (info->dt_compatible) {
+ ret = fdt_setprop_string(fdt, node_off, "compatible",
+ info->dt_compatible);
+ if (ret< 0) {
+ return ret;
+ }
+ }
+
+ if (info->devnode) {
+ ret = (info->devnode)(dev, fdt, node_off);
+ if (ret< 0) {
+ return ret;
+ }
+ }
+
+ return node_off;
+}
+#endif /* CONFIG_FDT */
+
+static int spapr_vio_busdev_init(DeviceState *dev, DeviceInfo *info)
+{
+ VIOsPAPRDeviceInfo *_info = (VIOsPAPRDeviceInfo *)info;
+ VIOsPAPRDevice *_dev = (VIOsPAPRDevice *)dev;
+ char *id;
+
+ if (asprintf(&id, "address@hidden", _info->dt_name, _dev->reg)< 0) {
+ return -1;
+ }
+
+ _dev->qdev.id = id;
+ info->hcalls(bus);
+ }
+
+ return bus;
+}
+
+/* Represents sPAPR hcall VIO devices */
+
+static int spapr_vio_bridge_init(SysBusDevice *dev)
+{
+ /* nothing */
+ return 0;
+}
+
+static SysBusDeviceInfo spapr_vio_bridge_info = {
+ .init = spapr_vio_bridge_init,
+ .qdev.name = "spapr-vio-bridge",
+ .qdev.size = sizeof(SysBusDevice),
+ .qdev.no_user = 1,
+};
+
+static void spapr_vio_register_devices(void)
+{
+ sysbus_register_withprop(&spapr_vio_bridge_info);
+}
+
+device_init(spapr_vio_register_devices)
+
+#ifdef CONFIG_FDT
+int spapr_populate_vdevice(VIOsPAPRBus *bus, void *fdt)
+{
+ DeviceState *qdev;
+ int ret = 0;
+
+ QLIST_FOREACH(qdev,&bus->bus.children, sibling) {
+ VIOsPAPRDevice *dev = (VIOsPAPRDevice *)qdev;
+
+ ret = vio_make_devnode(dev, fdt);
+
+ if (ret< 0) {
+ return ret;
+ }
+ }
+
+ return 0;
+}
+#endif /* CONFIG_FDT */
diff --git a/hw/spapr_vio.h b/hw/spapr_vio.h
new file mode 100644
index 0000000..b164ad3
--- /dev/null
+++ b/hw/spapr_vio.h
@@ -0,0 +1,50 @@
+#ifndef _HW_SPAPR_VIO_H
+#define _HW_SPAPR_VIO_H
+/*
+ * QEMU sPAPR VIO bus definitions
+ *
+ * Copyright (c) 2010 David Gibson, IBM Corporation<address@hidden>
+ * Based on the s390 virtio bus definitions:
+ * Copyright (c) 2009 Alexander Graf<address@hidden>
+ *
+ * This library is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU Lesser General Public
+ * License as published by the Free Software Foundation; either
+ * version 2 of the License, or (at your option) any later version.
+ *
+ * This library is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * Lesser General Public License for more details.
+ *
+ * You should have received a copy of the GNU Lesser General Public
+ * License along with this library; if not, see<http://www.gnu.org/licenses/>.
+ */
+
+typedef struct VIOsPAPRDevice {
+ DeviceState qdev;
+ uint32_t reg;
+} VIOsPAPRDevice;
+
+typedef struct VIOsPAPRBus {
+ BusState bus;
+} VIOsPAPRBus;
+
+typedef struct {
+ DeviceInfo qdev;
+ const char *dt_name, *dt_type, *dt_compatible;
+ int (*init)(VIOsPAPRDevice *dev);
+ void (*hcalls)(VIOsPAPRBus *bus);
+ int (*devnode)(VIOsPAPRDevice *dev, void *fdt, int node_off);
+} VIOsPAPRDeviceInfo;
+
+extern VIOsPAPRBus *spapr_vio_bus_init(void);
+extern VIOsPAPRDevice *spapr_vio_find_by_reg(VIOsPAPRBus *bus, uint32_t reg);
+extern void spapr_vio_bus_register_withprop(VIOsPAPRDeviceInfo *info);
+extern int spapr_populate_vdevice(VIOsPAPRBus *bus, void *fdt);
+
+void vty_putchars(VIOsPAPRDevice *sdev, uint8_t *buf, int len);
+void spapr_vty_create(VIOsPAPRBus *bus,
+ uint32_t reg, CharDriverState *chardev);
+
+#endif /* _HW_SPAPR_VIO_H */
diff --git a/hw/spapr_vty.c b/hw/spapr_vty.c
new file mode 100644
index 0000000..afc9ef9
--- /dev/null
+++ b/hw/spapr_vty.c
@@ -0,0 +1,145 @@