[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] Re: lsi53c895a: add support for ABORT messages
From: |
Aurelien Jarno |
Subject: |
[Qemu-devel] Re: lsi53c895a: add support for ABORT messages |
Date: |
Fri, 1 Apr 2011 22:16:24 +0200 |
User-agent: |
Mutt/1.5.20 (2009-06-14) |
On Mon, Sep 06, 2010 at 04:42:54AM -0000, Bernhard Kohl wrote:
> If these messages are not handled correctly the guest driver may hang.
>
> Always mandatory:
> - ABORT
> - BUS DEVICE RESET
>
> Mandatory if tagged queuing is implemented (which disks usually do):
> - ABORT TAG
> - CLEAR QUEUE
>
> Signed-off-by: Bernhard Kohl <address@hidden>
>
> ---
> hw/lsi53c895a.c | 57 +++++++++++++++++++++++++++++++++++++++++++++++++++++++
> 1 files changed, 57 insertions(+), 0 deletions(-)
Thanks, applied.
> diff --git a/hw/lsi53c895a.c b/hw/lsi53c895a.c
> index 5eaf69e..40f2d10 100644
> --- a/hw/lsi53c895a.c
> +++ b/hw/lsi53c895a.c
> @@ -846,6 +846,18 @@ static void lsi_do_msgout(LSIState *s)
> {
> uint8_t msg;
> int len;
> + uint32_t current_tag;
> + SCSIDevice *current_dev;
> + lsi_request *p, *p_next;
> + int id;
> +
> + if (s->current) {
> + current_tag = s->current->tag;
> + } else {
> + current_tag = s->select_tag;
> + }
> + id = (current_tag >> 8) & 0xf;
> + current_dev = s->bus.devs[id];
>
> DPRINTF("MSG out len=%d\n", s->dbc);
> while (s->dbc) {
> @@ -890,6 +902,51 @@ static void lsi_do_msgout(LSIState *s)
> BADF("ORDERED queue not implemented\n");
> s->select_tag |= lsi_get_msgbyte(s) | LSI_TAG_VALID;
> break;
> + case 0x0d:
> + /* The ABORT TAG message clears the current I/O process only. */
> + DPRINTF("MSG: ABORT TAG tag=0x%x\n", current_tag);
> + current_dev->info->cancel_io(current_dev, current_tag);
> + lsi_disconnect(s);
> + break;
> + case 0x06:
> + case 0x0e:
> + case 0x0c:
> + /* The ABORT message clears all I/O processes for the selecting
> + initiator on the specified logical unit of the target. */
> + if (msg == 0x06) {
> + DPRINTF("MSG: ABORT tag=0x%x\n", current_tag);
> + }
> + /* The CLEAR QUEUE message clears all I/O processes for all
> + initiators on the specified logical unit of the target. */
> + if (msg == 0x0e) {
> + DPRINTF("MSG: CLEAR QUEUE tag=0x%x\n", current_tag);
> + }
> + /* The BUS DEVICE RESET message clears all I/O processes for all
> + initiators on all logical units of the target. */
> + if (msg == 0x0c) {
> + DPRINTF("MSG: BUS DEVICE RESET tag=0x%x\n", current_tag);
> + }
> +
> + /* clear the current I/O process */
> + current_dev->info->cancel_io(current_dev, current_tag);
> +
> + /* As the current implemented devices scsi_disk and scsi_generic
> + only support one LUN, we don't need to keep track of LUNs.
> + Clearing I/O processes for other initiators could be possible
> + for scsi_generic by sending a SG_SCSI_RESET to the /dev/sgX
> + device, but this is currently not implemented (and seems not
> + to be really necessary). So let's simply clear all queued
> + commands for the current device: */
> + id = current_tag & 0x0000ff00;
> + QTAILQ_FOREACH_SAFE(p, &s->queue, next, p_next) {
> + if ((p->tag & 0x0000ff00) == id) {
> + current_dev->info->cancel_io(current_dev, p->tag);
> + QTAILQ_REMOVE(&s->queue, p, next);
> + }
> + }
> +
> + lsi_disconnect(s);
> + break;
> default:
> if ((msg & 0x80) == 0) {
> goto bad;
--
Aurelien Jarno GPG: 1024D/F1BCDB73
address@hidden http://www.aurel32.net
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] Re: lsi53c895a: add support for ABORT messages,
Aurelien Jarno <=