[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination
From: |
Aurelien Jarno |
Subject: |
Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination |
Date: |
Sun, 15 May 2011 15:43:37 +0200 |
User-agent: |
Mutt/1.5.20 (2009-06-14) |
On Sun, May 15, 2011 at 04:16:20PM +0300, Blue Swirl wrote:
> On Sun, May 15, 2011 at 3:49 PM, Aurelien Jarno <address@hidden> wrote:
> > On Sun, May 15, 2011 at 03:30:17PM +0300, Blue Swirl wrote:
> >> On Sun, May 15, 2011 at 2:36 PM, Aurelien Jarno <address@hidden> wrote:
> >> > On Sun, May 15, 2011 at 02:12:27PM +0300, Blue Swirl wrote:
> >> >> On Sun, May 15, 2011 at 1:19 PM, Aurelien Jarno <address@hidden> wrote:
> >> >> > I still don't get where are this list of possible changes? Did I miss
> >> >> > something in another thread?
> >> >>
> >> >> I'm referring to the patches I sent.
> >> >
> >> > Ok, patches 1, 2 and 4 to 7 looks ok at a first glance, though I think
> >> > patches 6 and 7 should be done for all hosts or none of them.
> >>
> >> The changes can be done in steps, but of course removing temp_buf from
> >> CPUState would need all targets to be converted first.
> >>
> >> >> > On the TCG generated code, the env structure is used almost for every
> >> >> > op, so it really makes sense to keep it in a register instead of
> >> >> > having to
> >> >> > reload the address of env regularly from memory. Given it only affects
> >> >> > TCG generated code, I don't see the point of portability here.
> >> >>
> >> >> For example, maybe the bugs in Sparc glibc could be avoided by using
> >> >> one of %i set of registers (not accessible from helpers) for AREG0
> >> >> within generated code instead of %g registers which seem to be
> >> >> fragile.
> >> >
> >> > First of all, but it's a different subject, I am not sure there are
> >> > sparc glibc bugs, I'd rather says QEMU mis-uses some register. For
> >> > example the following code is probably wrong:
> >> >
> >> > /* Note: must be synced with dyngen-exec.h */
> >> > #ifdef CONFIG_SOLARIS
> >> > #define TCG_AREG0 TCG_REG_G2
> >> > #elif defined(__sparc_v9__)
> >> > #define TCG_AREG0 TCG_REG_G5
> >> > #else
> >> > #define TCG_AREG0 TCG_REG_G6
> >> > #endif
> >> >
> >> > __sparc_v9__ can set on the 32-bit ABI, when the compiler targets V8+,
> >> > so the condition is probably wrong there. Secondly the SPARC ABI [1] on
> >> > page 23 that %g5 to %g7 are reserved for system. I don't think QEMU has
> >> > the right to use this registers.
> >>
> >> Yes, but the situation is not so nice. Please see this post for status
> >> as of 2010:
> >> http://article.gmane.org/gmane.comp.emulators.qemu/63610
> >>
> >> This is from Debian glibc 2.11.2-10:
> >> $ file /lib/libc-2.11.2.so
> >> /lib/libc-2.11.2.so: ELF 32-bit MSB shared object, SPARC32PLUS,
> >> version 1 (SYSV), dynamically linked (uses shared libs), for GNU/Linux
> >> 2.6.18, stripped
> >> $ objdump -d /lib/libc.so.6 |grep %g1|wc -l
> >> 69648
> >> $ objdump -d /lib/libc.so.6 |grep %g2|wc -l
> >> 37299
> >> $ objdump -d /lib/libc.so.6 |grep %g3|wc -l
> >> 20635
> >> $ objdump -d /lib/libc.so.6 |grep %g4|wc -l
> >> 11603
> >> $ objdump -d /lib/libc.so.6 |grep %g5|wc -l
> >> 448
> >> $ objdump -d /lib/libc.so.6 |grep %g6|wc -l
> >> 150
> >> $ objdump -d /lib/libc.so.6 |grep %g7|wc -l
> >> 3052
> >>
> >> Glibc is compiled for Sparc32plus, so it should only use %g6 and %g7,
> >
> > From the calling convention point of view, sparc32 and sparc32plus are
> > the same ABI, so %g5 is also reserved for system use.
> >
> >> or %g1 and %g5 for scratch purposes. However, it is the application
> >> registers %g2 to %g4 that are used heaviest. Looking inside the
> >> objdump it's easy to see that the uses are not for example saving or
> >> restoring, but actually using them without saving the previous value
> >> first:
> >
> > Well, we have to define system and application. System is defined as
> > library in Chapter 6, and I don't see the libc there, and is probably
> > considered as part of the application.
>
> No, for example unistd.h is described and even X11. GCC also says that
> libraries should be compiled without using the registers:
>
> http://gcc.gnu.org/onlinedocs/gcc-4.6.0/gcc/SPARC-Options.html#SPARC-Options
>
> >> 000211e0 <__divdi3>:
> >> 211e0: 9d e3 bf a0 save %sp, -96, %sp
> >> 211e4: 90 10 00 18 mov %i0, %o0
> >> 211e8: 92 10 00 19 mov %i1, %o1
> >> 211ec: 94 10 00 1a mov %i2, %o2
> >> 211f0: 96 10 00 1b mov %i3, %o3
> >> 211f4: 80 a6 20 00 cmp %i0, 0
> >> 211f8: 06 40 00 10 bl,pn %icc, 21238 <__divdi3+0x58>
> >> 211fc: a0 10 20 00 clr %l0
> >> 21200: 80 a2 a0 00 cmp %o2, 0
> >> 21204: 26 40 00 13 bl,a,pn %icc, 21250 <__divdi3+0x70>
> >> 21208: a0 38 00 10 xnor %g0, %l0, %l0
> >> 2120c: 7f ff fe ed call 20dc0 <__ashldi3+0x40>
> >> 21210: 98 10 20 00 clr %o4
> >> 21214: 84 10 00 08 mov %o0, %g2
> >>
> >> ...whoops...
> >>
> >> 21218: 80 a4 20 00 cmp %l0, 0
> >> 2121c: 02 40 00 04 be,pn %icc, 2122c <__divdi3+0x4c>
> >> 21220: 86 10 00 09 mov %o1, %g3
> >>
> >> ...whoops...
> >>
> >> 21224: 86 a0 00 09 subcc %g0, %o1, %g3
> >> 21228: 84 60 00 02 subc %g0, %g2, %g2
> >> 2122c: b2 10 00 03 mov %g3, %i1
> >> 21230: 81 cf e0 08 rett %i7 + 8
> >> 21234: 90 10 00 02 mov %g2, %o0
> >> 21238: 92 a0 00 19 subcc %g0, %i1, %o1
> >> 2123c: 90 60 00 18 subc %g0, %i0, %o0
> >> 21240: 80 a2 a0 00 cmp %o2, 0
> >> 21244: 16 4f ff f2 bge %icc, 2120c <__divdi3+0x2c>
> >> 21248: a0 10 3f ff mov -1, %l0
> >> 2124c: a0 38 00 10 xnor %g0, %l0, %l0
> >> 21250: 96 a0 00 0b subcc %g0, %o3, %o3
> >> 21254: 10 6f ff ee b %xcc, 2120c <__divdi3+0x2c>
> >> 21258: 94 60 00 0a subc %g0, %o2, %o2
> >> 2125c: 01 00 00 00 nop
> >>
> >> This is libc from OpenBSD/Sparc64 4.9:
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g1|wc -l
> >> 40562
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g2|wc -l
> >> 20384
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g3|wc -l
> >> 10240
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g4|wc -l
> >> 6606
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g5|wc -l
> >> 3811
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g6|wc -l
> >> 4
> >> $ objdump -d /usr/lib/libc.so.58.0 |grep %g7|wc -l
> >> 20
> >>
> >> Not so great there either.
> >>
> >> > Anyway, I don't see why keeping TCG_AREG0 inside the TCG generated code
> >> > would prevent you to use a register from the %i set for it.
> >>
> >> The helpers currently use global env register, but %i registers can't
> >> be accessed from the next level of function call nesting hierarchy so
> >> they can't be used for global env.
> >>
> >
> > That's the current situation yes. Using %i registers for TCG_AREG0 does
> > mean you can't use a global env register in the helpers, but it doesn't
> > mean that internal TCG code can't use them for TCG_AREG0.
>
> Exactly.
>
> > What I am telling you since the beginning is that:
> > - I have no objection that we stop using a fixed register in GCC
> > generated code (that is completely removing HELPER_CFLAGS). However I
> > don't really see the point of doing that, though the Sparc issue might
> > be an argument.
> > - I do have objection to remove TCG_AREG0 from inside the TCG generated
> > code, this register is used for almost every TCG op, and I don't see
> > any real argument for not keeping it.
>
> I'm pretty much open at this point for all alternatives.
>
So what about getting rid of TCG_AREG0 for GCC generated code only, at
least as a first step?
So what about the following changes:
- Change TCG_AREG0 of all targets to a callee saved register (if
possible, e.g. sparc)
- Change the prologue of all TCG targets to take env as an argument,
and save it into TCG_AREG0.
- Change all helpers to explicitly take an env pointer instead of using
the fixed register. Note that it also includes softmmu helpers, but
the TCG load/store instructions should be kept unchanged.
- Remove HELPER_CFLAGS from makefiles when all helpers have been
changed.
- TCG_AREG0 can then be changed to another register if needed.
And later we can do more steps to get a complete removal of TCG_AREG0,
including in TCG code, though I still think it is a really bad idea.
--
Aurelien Jarno GPG: 1024D/F1BCDB73
address@hidden http://www.aurel32.net
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, (continued)
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/14
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination,
Aurelien Jarno <=
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Laurent Desnogues, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Aurelien Jarno, 2011/05/15
- Re: [Qemu-devel] [PATCH RFC 00/11] AREG0 elimination, Blue Swirl, 2011/05/15