This is the actual guest daemon, it listens for requests over a
virtio-serial/isa-serial/unix socket channel and routes them through
to dispatch routines, and writes the results back to the channel in
a manner similar to QMP.
A shorthand invocation:
qemu-ga -d
Is equivalent to:
qemu-ga -m virtio-serial -p /dev/virtio-ports/org.qemu.guest_agent.0 \
-f /var/run/qemu-ga.pid -d
Signed-off-by: Michael Roth<address@hidden>
---
Makefile | 8 +-
configure | 1 +
qemu-ga.c | 667 ++++++++++++++++++++++++++++++++++++++++++++++++
qga/guest-agent-core.h | 4 +
4 files changed, 677 insertions(+), 3 deletions(-)
create mode 100644 qemu-ga.c
diff --git a/Makefile b/Makefile
index b8cdf0e..0d2e33d 100644
--- a/Makefile
+++ b/Makefile
@@ -140,7 +140,7 @@ endif
######################################################################
qemu-img.o: qemu-img-cmds.h
-qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o:
$(GENERATED_HEADERS)
+qemu-img.o qemu-tool.o qemu-nbd.o qemu-io.o cmd.o qemu-ga.o:
$(GENERATED_HEADERS)
qemu-img$(EXESUF): qemu-img.o qemu-tool.o qemu-error.o
$(oslib-obj-y) $(trace-obj-y) $(block-obj-y) $(qobject-obj-y)
$(version-obj-y) qemu-timer-common.o
@@ -184,13 +184,15 @@ test-qmp-commands: test-qmp-commands.o
qfloat.o qint.o qdict.o qstring.o qlist.o
QGALIB=qga/guest-agent-command-state.o
+qemu-ga$(EXESUF): qemu-ga.o $(QGALIB) qemu-tool.o qemu-error.o
error.o $(oslib-obj-y) $(trace-obj-y) $(block-obj-y)
$(qobject-obj-y) $(version-obj-y) $(qapi-obj-y) qemu-timer-common.o
qemu-sockets.o module.o qapi/qmp-dispatch.o qapi/qmp-registry.o
+
QEMULIBS=libhw32 libhw64 libuser libdis libdis-user
clean:
# avoid old build problems by removing potentially incorrect old files
rm -f config.mak op-i386.h opc-i386.h gen-op-i386.h op-arm.h
opc-arm.h gen-op-arm.h
rm -f qemu-options.def
- rm -f *.o *.d *.a *.lo $(TOOLS) TAGS cscope.* *.pod *~ */*~
+ rm -f *.o *.d *.a *.lo $(TOOLS) qemu-ga TAGS cscope.* *.pod *~ */*~
rm -Rf .libs
rm -f slirp/*.o slirp/*.d audio/*.o audio/*.d block/*.o block/*.d
net/*.o net/*.d fsdev/*.o fsdev/*.d ui/*.o ui/*.d qapi/*.o qapi/*.d
qga/*.o qga/*.d
rm -f qemu-img-cmds.h
@@ -386,4 +388,4 @@ tarbin:
$(mandir)/man8/qemu-nbd.8
# Include automatically generated dependency files
--include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d
ui/*.d qapi/*.d)
+-include $(wildcard *.d audio/*.d slirp/*.d block/*.d net/*.d
ui/*.d qapi/*.d qga/*.d)
diff --git a/configure b/configure
index 6a03002..445f674 100755
--- a/configure
+++ b/configure
@@ -2532,6 +2532,7 @@ if test "$softmmu" = yes ; then
tools="qemu-img\$(EXESUF) qemu-io\$(EXESUF) $tools"
if [ "$linux" = "yes" -o "$bsd" = "yes" -o "$solaris" = "yes" ] ; then
tools="qemu-nbd\$(EXESUF) $tools"
+ tools="qemu-ga\$(EXESUF) $tools"
if [ "$check_utests" = "yes" ]; then
tools="check-qint check-qstring check-qdict check-qlist $tools"
tools="check-qfloat check-qjson $tools"
diff --git a/qemu-ga.c b/qemu-ga.c
new file mode 100644
index 0000000..eb09100
--- /dev/null
+++ b/qemu-ga.c
@@ -0,0 +1,667 @@
+/*
+ * QEMU Guest Agent
+ *
+ * Copyright IBM Corp. 2011
+ *
+ * Authors:
+ * Adam Litke<address@hidden>
+ * Michael Roth<address@hidden>
+ *
+ * This work is licensed under the terms of the GNU GPL, version 2
or later.
+ * See the COPYING file in the top-level directory.
+ */
+#include<stdlib.h>
+#include<stdio.h>
+#include<stdbool.h>
+#include<glib.h>
+#include<gio/gio.h>
+#include<getopt.h>
+#include<termios.h>
+#include<syslog.h>
+#include "qemu_socket.h"
+#include "json-streamer.h"
+#include "json-parser.h"
+#include "qint.h"
+#include "qjson.h"
+#include "qga/guest-agent-core.h"
+#include "module.h"
+#include "signal.h"
+#include "qerror.h"
+#include "error_int.h"
+
+#define QGA_VIRTIO_PATH_DEFAULT
"/dev/virtio-ports/org.qemu.guest_agent.0"
+#define QGA_PIDFILE_DEFAULT "/var/run/qemu-ga.pid"
+#define QGA_BAUDRATE_DEFAULT B38400 /* for isa-serial channels */
+#define QGA_TIMEOUT_DEFAULT 30*1000 /* ms */
+
+struct GAState {
+ JSONMessageParser parser;
+ GMainLoop *main_loop;
+ guint conn_id;
+ GSocket *conn_sock;
+ GIOChannel *conn_channel;
+ guint listen_id;
+ GSocket *listen_sock;
+ GIOChannel *listen_channel;
+ const char *path;
+ const char *method;
+ bool virtio; /* fastpath to check for virtio to deal with poll()
quirks */
+ GACommandState *command_state;
+ GLogLevelFlags log_level;
+ FILE *log_file;
+ bool logging_enabled;
+};
+
+static struct GAState *ga_state;
+
+static void quit_handler(int sig)
+{
+ g_debug("recieved signal num %d, quitting", sig);
+
+ if (g_main_loop_is_running(ga_state->main_loop)) {
+ g_main_loop_quit(ga_state->main_loop);
+ }
+}
+
+static void register_signal_handlers(void)
+{
+ struct sigaction sigact;
+ int ret;
+
+ memset(&sigact, 0, sizeof(struct sigaction));
+ sigact.sa_handler = quit_handler;
+
+ ret = sigaction(SIGINT,&sigact, NULL);
+ if (ret == -1) {
+ g_error("error configuring signal handler: %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+ ret = sigaction(SIGTERM,&sigact, NULL);
+ if (ret == -1) {
+ g_error("error configuring signal handler: %s", strerror(errno));
+ }
+}
+
+static void usage(const char *cmd)
+{
+ printf(
+"Usage: %s -c<channel_opts>\n"
+"QEMU Guest Agent %s\n"
+"\n"
+" -m, --method transport method: one of unix-listen,
virtio-serial, or\n"
+" isa-serial (virtio-serial is the default)\n"
+" -p, --path device/socket path (%s is the default for
virtio-serial)\n"
+" -l, --logfile set logfile path, logs to stderr by default\n"
+" -f, --pidfile specify pidfile (default is %s)\n"
+" -v, --verbose log extra debugging information\n"
+" -V, --version print version information and exit\n"
+" -d, --daemonize become a daemon\n"
+" -h, --help display this help and exit\n"
+"\n"
+"Report bugs to<address@hidden>\n"
+ , cmd, QGA_VERSION, QGA_VIRTIO_PATH_DEFAULT, QGA_PIDFILE_DEFAULT);
+}
+
+static void conn_channel_close(GAState *s);
+
+static const char *ga_log_level_str(GLogLevelFlags level)
+{
+ switch (level& G_LOG_LEVEL_MASK) {
+ case G_LOG_LEVEL_ERROR:
+ return "error";
+ case G_LOG_LEVEL_CRITICAL:
+ return "critical";
+ case G_LOG_LEVEL_WARNING:
+ return "warning";
+ case G_LOG_LEVEL_MESSAGE:
+ return "message";
+ case G_LOG_LEVEL_INFO:
+ return "info";
+ case G_LOG_LEVEL_DEBUG:
+ return "debug";
+ default:
+ return "user";
+ }
+}
+
+bool ga_logging_enabled(GAState *s)
+{
+ return s->logging_enabled;
+}
+
+void ga_disable_logging(GAState *s)
+{
+ s->logging_enabled = false;
+}
+
+void ga_enable_logging(GAState *s)
+{
+ s->logging_enabled = true;
+}
+
+static void ga_log(const gchar *domain, GLogLevelFlags level,
+ const gchar *msg, gpointer opaque)
+{
+ GAState *s = opaque;
+ GTimeVal time;
+ const char *level_str = ga_log_level_str(level);
+
+ if (!ga_logging_enabled(s)) {
+ return;
+ }
+
+ level&= G_LOG_LEVEL_MASK;
+ if (g_strcmp0(domain, "syslog") == 0) {
+ syslog(LOG_INFO, "%s: %s", level_str, msg);
+ } else if (level& s->log_level) {
+ g_get_current_time(&time);
+ fprintf(s->log_file,
+ "%lu.%lu: %s: %s\n", time.tv_sec, time.tv_usec, level_str, msg);
+ fflush(s->log_file);
+ }
+}
+
+static void become_daemon(const char *pidfile)
+{
+ pid_t pid, sid;
+ int pidfd;
+ char *pidstr = NULL;
+
+ pid = fork();
+ if (pid< 0) {
+ exit(EXIT_FAILURE);
+ }
+ if (pid> 0) {
+ exit(EXIT_SUCCESS);
+ }
+
+ pidfd = open(pidfile, O_CREAT|O_WRONLY|O_EXCL, S_IRUSR|S_IWUSR);
+ if (pidfd == -1) {
+ g_critical("Cannot create pid file, %s", strerror(errno));
+ exit(EXIT_FAILURE);
+ }
+
+ if (asprintf(&pidstr, "%d", getpid()) == -1) {
+ g_critical("Cannot allocate memory");
+ goto fail;
+ }
+ if (write(pidfd, pidstr, strlen(pidstr)) != strlen(pidstr)) {
+ free(pidstr);
+ g_critical("Failed to write pid file");
+ goto fail;
+ }
+
+ umask(0);
+ sid = setsid();
+ if (sid< 0) {
+ goto fail;
+ }
+ if ((chdir("/"))< 0) {
+ goto fail;
+ }
+
+ close(STDIN_FILENO);
+ close(STDOUT_FILENO);
+ close(STDERR_FILENO);
+ free(pidstr);
+ return;
+
+fail:
+ unlink(pidfile);
+ g_critical("failed to daemonize");
+ exit(EXIT_FAILURE);
+}
+
+static int conn_channel_send_buf(GIOChannel *channel, const char
*buf,
+ gsize count)
+{
+ GError *err = NULL;
+ gsize written = 0;
+ GIOStatus status;
+
+ while (count) {
+ status = g_io_channel_write_chars(channel, buf,
count,&written,&err);
+ g_debug("sending data, count: %d", (int)count);
+ if (err != NULL) {
+ g_warning("error sending newline: %s", err->message);
+ return err->code;
+ }
+ if (status == G_IO_STATUS_ERROR || status == G_IO_STATUS_EOF) {
+ return -EPIPE;
+ }
+
+ if (status == G_IO_STATUS_NORMAL) {
+ count -= written;
+ }
+ }
+
+ return 0;
+}
+
+static int conn_channel_send_payload(GIOChannel *channel, QObject
*payload)
+{
+ int ret = 0;
+ const char *buf;
+ QString *payload_qstr;
+ GError *err = NULL;
+
+ g_assert(payload&& channel);
+
+ payload_qstr = qobject_to_json(payload);
+ if (!payload_qstr) {
+ return -EINVAL;
+ }
+
+ qstring_append_chr(payload_qstr, '\n');
+ buf = qstring_get_str(payload_qstr);
+ ret = conn_channel_send_buf(channel, buf, strlen(buf));
+ if (ret) {
+ goto out_free;
+ }
+
+ g_io_channel_flush(channel,&err);
+ if (err != NULL) {
+ g_warning("error flushing payload: %s", err->message);
+ ret = err->code;
+ goto out_free;
+ }
+
+out_free:
+ QDECREF(payload_qstr);
+ if (err) {
+ g_error_free(err);
+ }
+ return ret;
+}
+
+static void process_command(GAState *s, QDict *req)
+{
+ QObject *rsp = NULL;
+ int ret;
+
+ g_assert(req);
+ g_debug("processing command");
+ rsp = qmp_dispatch(QOBJECT(req));
+ if (rsp) {
+ ret = conn_channel_send_payload(s->conn_channel, rsp);
+ if (ret) {
+ g_warning("error sending payload: %s", strerror(ret));
+ }
+ qobject_decref(rsp);
+ } else {
+ g_warning("error getting response");
+ }
+}
+
+/* handle requests/control events coming in over the channel */
+static void process_event(JSONMessageParser *parser, QList *tokens)
+{
+ GAState *s = container_of(parser, GAState, parser);
+ QObject *obj;
+ QDict *qdict;
+ Error *err = NULL;
+ int ret;
+
+ g_assert(s&& parser);
+
+ g_debug("process_event: called");
+ obj = json_parser_parse_err(tokens, NULL,&err);
+ if (err || !obj || qobject_type(obj) != QTYPE_QDICT) {
+ qobject_decref(obj);
+ qdict = qdict_new();
+ if (!err) {
+ g_warning("failed to parse event: unknown error");
+ error_set(&err, QERR_JSON_PARSING);
+ } else {
+ g_warning("failed to parse event: %s", error_get_pretty(err));
+ }
+ qdict_put_obj(qdict, "error", error_get_qobject(err));
+ error_free(err);
+ } else {
+ qdict = qobject_to_qdict(obj);
+ }
+
+ g_assert(qdict);
+
+ /* handle host->guest commands */
+ if (qdict_haskey(qdict, "execute")) {
+ process_command(s, qdict);
+ } else {
+ if (!qdict_haskey(qdict, "error")) {
+ QDECREF(qdict);
+ qdict = qdict_new();
+ g_warning("unrecognized payload format");
+ error_set(&err, QERR_UNSUPPORTED);
+ qdict_put_obj(qdict, "error", error_get_qobject(err));
+ error_free(err);
+ }
+ ret = conn_channel_send_payload(s->conn_channel, QOBJECT(qdict));
+ if (ret) {
+ g_warning("error sending payload: %s", strerror(ret));
+ }
+ }
+
+ QDECREF(qdict);
+}
+
+static gboolean conn_channel_read(GIOChannel *channel,
GIOCondition condition,
+ gpointer data)
+{
+ GAState *s = data;
+ gchar buf[1024];
+ gsize count;
+ GError *err = NULL;
+ memset(buf, 0, 1024);
+ GIOStatus status = g_io_channel_read_chars(channel, buf, 1024,
+&count,&err);
+ if (err != NULL) {
+ g_warning("error reading channel: %s", err->message);
+ conn_channel_close(s);
+ g_error_free(err);
+ return false;
+ }
+ switch (status) {
+ case G_IO_STATUS_ERROR:
+ g_warning("problem");
+ return false;
+ case G_IO_STATUS_NORMAL:
+ g_debug("read data, count: %d, data: %s", (int)count, buf);
+ json_message_parser_feed(&s->parser, (char *)buf, (int)count);
+ case G_IO_STATUS_AGAIN:
+ /* virtio causes us to spin here when no process is attached to
+ * host-side chardev. sleep a bit to mitigate this
+ */
+ if (s->virtio) {
+ usleep(100*1000);
+ }
+ return true;
+ case G_IO_STATUS_EOF:
+ g_debug("received EOF");
+ conn_channel_close(s);
+ if (s->virtio) {
+ return true;
+ }
+ return false;
+ default:
+ g_warning("unknown channel read status, closing");
+ conn_channel_close(s);
+ return false;
+ }
+ return true;
+}
+
+static int conn_channel_add(GAState *s, int fd)
+{
+ GIOChannel *conn_channel;
+ guint conn_id;
+ GError *err = NULL;
+
+ g_assert(s&& !s->conn_channel);
+ conn_channel = g_io_channel_unix_new(fd);
+ g_assert(conn_channel);
+ g_io_channel_set_encoding(conn_channel, NULL,&err);
+ if (err != NULL) {
+ g_warning("error setting channel encoding to binary");
+ g_error_free(err);
+ return -1;
+ }
+ conn_id = g_io_add_watch(conn_channel, G_IO_IN | G_IO_HUP,
+ conn_channel_read, s);
+ if (err != NULL) {
+ g_warning("error adding io watch: %s", err->message);
+ g_error_free(err);
+ return -1;
+ }
+ s->conn_channel = conn_channel;
+ s->conn_id = conn_id;
+ return 0;
+}
+
+static gboolean listen_channel_accept(GIOChannel *channel,
+ GIOCondition condition, gpointer data)
+{
+ GAState *s = data;
+ GError *err = NULL;
+ g_assert(channel != NULL);
+ int ret;
+ bool accepted = false;
+
+ s->conn_sock = g_socket_accept(s->listen_sock, NULL,&err);
+ if (err != NULL) {
+ g_warning("error converting fd to gsocket: %s", err->message);
+ g_error_free(err);
+ goto out;
+ }
+ ret = conn_channel_add(s, g_socket_get_fd(s->conn_sock));
+ if (ret) {
+ g_warning("error setting up connection");
+ goto out;
+ }
+ accepted = true;
+
+out:
+ /* only accept 1 connection at a time */
+ return !accepted;
+}
+
+/* start polling for readable events on listen fd, new==true
+ * indicates we should use the existing s->listen_channel
+ */
+static int listen_channel_add(GAState *s, int listen_fd, bool new)
+{
+ GError *err = NULL;
+ guint listen_id;
+
+ if (new) {
+ s->listen_channel = g_io_channel_unix_new(listen_fd);
+ if (s->listen_sock) {
+ g_object_unref(s->listen_sock);
+ }
+ s->listen_sock = g_socket_new_from_fd(listen_fd,&err);
+ if (err != NULL) {
+ g_warning("error converting fd to gsocket: %s", err->message);
+ g_error_free(err);
+ return -1;
+ }
+ }
+ listen_id = g_io_add_watch(s->listen_channel, G_IO_IN,
+ listen_channel_accept, s);
+ if (err != NULL) {
+ g_warning("error adding io watch: %s", err->message);
+ g_error_free(err);
+ return -1;
+ }
+ return 0;