[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCHv3 4/9] consolidate qemu_iovec_copy() and qemu_iovec_
From: |
Michael Tokarev |
Subject: |
[Qemu-devel] [PATCHv3 4/9] consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent |
Date: |
Mon, 12 Mar 2012 23:14:18 +0400 |
qemu_iovec_concat() is currently a wrapper for
qemu_iovec_copy(), use the former (with extra
"0" arg) in a few places where it is used.
Change skip argument of qemu_iovec_copy() from
uint64_t to size_t, since size of qiov itself
is size_t, so there's no way to skip larger
sizes. Rename it to soffset, to make it clear
that the offset is applied to src.
Also change the only usage of uint64_t in
hw/9pfs/virtio-9p.c, in v9fs_init_qiov_from_pdu() -
all callers of it actually uses size_t too,
not uint64_t.
One added restriction: as for all other iovec-related
functions, soffset must point inside src.
Order of argumens is already good:
qemu_iovec_memset(QEMUIOVector *qiov, size_t offset,
int c, size_t bytes)
vs:
qemu_iovec_concat(QEMUIOVector *dst,
QEMUIOVector *src,
size_t soffset, size_t sbytes)
(note soffset is after _src_ not dst, since it applies to src;
for memset it applies to qiov).
Note that in many places where this function is used,
the previous call is qemu_iovec_reset(), which means
many callers actually want copy (replacing dst content),
not concat. So we may want to add a wrapper like
qemu_iovec_copy() with the same arguments but which
calls qemu_iovec_reset() before _concat(). This needs
to be done later, so that any current out-of-tree code
which uses _copy().
Signed-off-by: Michael Tokarev <address@hidden>
---
block.c | 4 +-
block/qcow2.c | 4 +-
block/qed.c | 6 ++--
cutils.c | 54 ++++++++++++++++++--------------------------------
hw/9pfs/virtio-9p.c | 8 +++---
qemu-common.h | 5 +--
6 files changed, 33 insertions(+), 48 deletions(-)
diff --git a/block.c b/block.c
index f4320be..9246518 100644
--- a/block.c
+++ b/block.c
@@ -2959,13 +2959,13 @@ static int multiwrite_merge(BlockDriverState *bs,
BlockRequest *reqs,
// Add the first request to the merged one. If the requests are
// overlapping, drop the last sectors of the first request.
size = (reqs[i].sector - reqs[outidx].sector) << 9;
- qemu_iovec_concat(qiov, reqs[outidx].qiov, size);
+ qemu_iovec_concat(qiov, reqs[outidx].qiov, 0, size);
// We should need to add any zeros between the two requests
assert (reqs[i].sector <= oldreq_last);
// Add the second request
- qemu_iovec_concat(qiov, reqs[i].qiov, reqs[i].qiov->size);
+ qemu_iovec_concat(qiov, reqs[i].qiov, 0, reqs[i].qiov->size);
reqs[outidx].nb_sectors = qiov->size >> 9;
reqs[outidx].qiov = qiov;
diff --git a/block/qcow2.c b/block/qcow2.c
index 106f2ce..894fb4d 100644
--- a/block/qcow2.c
+++ b/block/qcow2.c
@@ -445,7 +445,7 @@ static coroutine_fn int qcow2_co_readv(BlockDriverState
*bs, int64_t sector_num,
index_in_cluster = sector_num & (s->cluster_sectors - 1);
qemu_iovec_reset(&hd_qiov);
- qemu_iovec_copy(&hd_qiov, qiov, bytes_done,
+ qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
cur_nr_sectors * 512);
if (!cluster_offset) {
@@ -593,7 +593,7 @@ static coroutine_fn int qcow2_co_writev(BlockDriverState
*bs,
assert((cluster_offset & 511) == 0);
qemu_iovec_reset(&hd_qiov);
- qemu_iovec_copy(&hd_qiov, qiov, bytes_done,
+ qemu_iovec_concat(&hd_qiov, qiov, bytes_done,
cur_nr_sectors * 512);
if (s->crypt_method) {
diff --git a/block/qed.c b/block/qed.c
index 6f9325b..a4ef12c 100644
--- a/block/qed.c
+++ b/block/qed.c
@@ -1133,7 +1133,7 @@ static void qed_aio_write_alloc(QEDAIOCB *acb, size_t len)
acb->cur_nclusters = qed_bytes_to_clusters(s,
qed_offset_into_cluster(s, acb->cur_pos) + len);
- qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+ qemu_iovec_concat(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
if (acb->flags & QED_AIOCB_ZERO) {
/* Skip ahead if the clusters are already zero */
@@ -1179,7 +1179,7 @@ static void qed_aio_write_inplace(QEDAIOCB *acb, uint64_t
offset, size_t len)
/* Calculate the I/O vector */
acb->cur_cluster = offset;
- qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+ qemu_iovec_concat(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
/* Do the actual write */
qed_aio_write_main(acb, 0);
@@ -1249,7 +1249,7 @@ static void qed_aio_read_data(void *opaque, int ret,
goto err;
}
- qemu_iovec_copy(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
+ qemu_iovec_concat(&acb->cur_qiov, acb->qiov, acb->qiov_offset, len);
/* Handle zero cluster and backing file reads */
if (ret == QED_CLUSTER_ZERO) {
diff --git a/cutils.c b/cutils.c
index 1c93ed4..b8fc954 100644
--- a/cutils.c
+++ b/cutils.c
@@ -172,48 +172,34 @@ void qemu_iovec_add(QEMUIOVector *qiov, void *base,
size_t len)
}
/*
- * Copies iovecs from src to the end of dst. It starts copying after skipping
- * the given number of bytes in src and copies until src is completely copied
- * or the total size of the copied iovec reaches size.The size of the last
- * copied iovec is changed in order to fit the specified total size if it isn't
- * a perfect fit already.
+ * Concatenates (partial) iovecs from src to the end of dst.
+ * It starts copying after skipping `soffset' bytes at the
+ * beginning of src and adds individual vectors from src to
+ * dst copies up to `sbytes' bytes total, or up to the end
+ * of src if it comes first. This way, it is okay to specify
+ * very large value for `sbytes' to indicate "up to the end
+ * of src".
+ * Only vector pointers are processed, not the actual data buffers.
*/
-void qemu_iovec_copy(QEMUIOVector *dst, QEMUIOVector *src, uint64_t skip,
- size_t size)
+void qemu_iovec_concat(QEMUIOVector *dst,
+ QEMUIOVector *src, size_t soffset, size_t sbytes)
{
int i;
size_t done;
- void *iov_base;
- uint64_t iov_len;
-
+ struct iovec *siov = src->iov;
assert(dst->nalloc != -1);
-
- done = 0;
- for (i = 0; (i < src->niov) && (done != size); i++) {
- if (skip >= src->iov[i].iov_len) {
- /* Skip the whole iov */
- skip -= src->iov[i].iov_len;
- continue;
+ assert(src->size >= soffset);
+ for (i = 0, done = 0; done < sbytes && i < src->niov; i++) {
+ if (soffset < siov[i].iov_len) {
+ size_t len = MIN(siov[i].iov_len - soffset, sbytes - done);
+ qemu_iovec_add(dst, siov[i].iov_base + soffset, len);
+ done += len;
+ soffset = 0;
} else {
- /* Skip only part (or nothing) of the iov */
- iov_base = (uint8_t*) src->iov[i].iov_base + skip;
- iov_len = src->iov[i].iov_len - skip;
- skip = 0;
+ soffset -= siov[i].iov_len;
}
-
- if (done + iov_len > size) {
- qemu_iovec_add(dst, iov_base, size - done);
- break;
- } else {
- qemu_iovec_add(dst, iov_base, iov_len);
- }
- done += iov_len;
}
-}
-
-void qemu_iovec_concat(QEMUIOVector *dst, QEMUIOVector *src, size_t size)
-{
- qemu_iovec_copy(dst, src, 0, size);
+ /* return done; */
}
void qemu_iovec_destroy(QEMUIOVector *qiov)
diff --git a/hw/9pfs/virtio-9p.c b/hw/9pfs/virtio-9p.c
index c633fb9..f4a7026 100644
--- a/hw/9pfs/virtio-9p.c
+++ b/hw/9pfs/virtio-9p.c
@@ -1648,7 +1648,7 @@ out:
* with qemu_iovec_destroy().
*/
static void v9fs_init_qiov_from_pdu(QEMUIOVector *qiov, V9fsPDU *pdu,
- uint64_t skip, size_t size,
+ size_t skip, size_t size,
bool is_write)
{
QEMUIOVector elem;
@@ -1665,7 +1665,7 @@ static void v9fs_init_qiov_from_pdu(QEMUIOVector *qiov,
V9fsPDU *pdu,
qemu_iovec_init_external(&elem, iov, niov);
qemu_iovec_init(qiov, niov);
- qemu_iovec_copy(qiov, &elem, skip, size);
+ qemu_iovec_concat(qiov, &elem, skip, size);
}
static void v9fs_read(void *opaque)
@@ -1715,7 +1715,7 @@ static void v9fs_read(void *opaque)
qemu_iovec_init(&qiov, qiov_full.niov);
do {
qemu_iovec_reset(&qiov);
- qemu_iovec_copy(&qiov, &qiov_full, count, qiov_full.size - count);
+ qemu_iovec_concat(&qiov, &qiov_full, count, qiov_full.size -
count);
if (0) {
print_sg(qiov.iov, qiov.niov);
}
@@ -1970,7 +1970,7 @@ static void v9fs_write(void *opaque)
qemu_iovec_init(&qiov, qiov_full.niov);
do {
qemu_iovec_reset(&qiov);
- qemu_iovec_copy(&qiov, &qiov_full, total, qiov_full.size - total);
+ qemu_iovec_concat(&qiov, &qiov_full, total, qiov_full.size - total);
if (0) {
print_sg(qiov.iov, qiov.niov);
}
diff --git a/qemu-common.h b/qemu-common.h
index 2cbb513..31b30b5 100644
--- a/qemu-common.h
+++ b/qemu-common.h
@@ -333,9 +333,8 @@ typedef struct QEMUIOVector {
void qemu_iovec_init(QEMUIOVector *qiov, int alloc_hint);
void qemu_iovec_init_external(QEMUIOVector *qiov, struct iovec *iov, int niov);
void qemu_iovec_add(QEMUIOVector *qiov, void *base, size_t len);
-void qemu_iovec_copy(QEMUIOVector *dst, QEMUIOVector *src, uint64_t skip,
- size_t size);
-void qemu_iovec_concat(QEMUIOVector *dst, QEMUIOVector *src, size_t size);
+void qemu_iovec_concat(QEMUIOVector *dst,
+ QEMUIOVector *src, size_t soffset, size_t sbytes);
void qemu_iovec_destroy(QEMUIOVector *qiov);
void qemu_iovec_reset(QEMUIOVector *qiov);
void qemu_iovec_to_buffer(QEMUIOVector *qiov, void *buf);
--
1.7.9.1
- [Qemu-devel] [PATCHv3 0/9] cleanup/consolidate some iovec functions, Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 2/9] consolidate qemu_iovec_memset{, _skip}() into single function and use existing iov_memset(), Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 1/9] refresh iov_* functions, Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 4/9] consolidate qemu_iovec_copy() and qemu_iovec_concat() and make them consistent,
Michael Tokarev <=
- [Qemu-devel] [PATCHv3 5/9] change qemu_iovec_to_buf() to match other to, from_buf functions, Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 8/9] cleanup qemu_co_sendv(), qemu_co_recvv() and friends, Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 7/9] export qemu_sendv_recvv() and use it in qemu_sendv() and qemu_recvv(), Michael Tokarev, 2012/03/12
- [Qemu-devel] [PATCHv3 3/9] allow qemu_iovec_from_buffer() to specify offset from which to start copying, Michael Tokarev, 2012/03/12