[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 1/3] hw/xilinx_*: Share Xilinx devices between p
From: |
Peter Crosthwaite |
Subject: |
Re: [Qemu-devel] [PATCH 1/3] hw/xilinx_*: Share Xilinx devices between ppc and microblaze |
Date: |
Sat, 9 Jun 2012 12:15:14 +1000 |
On Sat, Jun 9, 2012 at 11:54 AM, Andreas Färber <address@hidden> wrote:
> Speeds up the build.
>
> xilinx_ethlite uses tswap32() and is thus target-dependent.
>
> Signed-off-by: Andreas Färber <address@hidden>
> ---
> default-configs/microblaze-softmmu.mak | 1 +
> default-configs/microblazeel-softmmu.mak | 1 +
> default-configs/ppc-softmmu.mak | 1 +
> default-configs/ppc64-softmmu.mak | 1 +
> default-configs/ppcemb-softmmu.mak | 1 +
> hw/Makefile.objs | 5 +++++
> hw/microblaze/Makefile.objs | 3 ---
> hw/ppc/Makefile.objs | 3 ---
> 8 files changed, 10 insertions(+), 6 deletions(-)
>
> diff --git a/default-configs/microblaze-softmmu.mak
> b/default-configs/microblaze-softmmu.mak
> index 613edab..08e7449 100644
> --- a/default-configs/microblaze-softmmu.mak
> +++ b/default-configs/microblaze-softmmu.mak
> @@ -3,3 +3,4 @@
> CONFIG_PTIMER=y
> CONFIG_PFLASH_CFI01=y
> CONFIG_SERIAL=y
> +CONFIG_XILINX=y
> diff --git a/default-configs/microblazeel-softmmu.mak
> b/default-configs/microblazeel-softmmu.mak
> index 4b40fb2..a9578e1 100644
> --- a/default-configs/microblazeel-softmmu.mak
> +++ b/default-configs/microblazeel-softmmu.mak
> @@ -3,3 +3,4 @@
> CONFIG_PTIMER=y
> CONFIG_PFLASH_CFI01=y
> CONFIG_SERIAL=y
> +CONFIG_XILINX=y
> diff --git a/default-configs/ppc-softmmu.mak b/default-configs/ppc-softmmu.mak
> index 1a768fc..d0fde7b 100644
> --- a/default-configs/ppc-softmmu.mak
> +++ b/default-configs/ppc-softmmu.mak
> @@ -36,3 +36,4 @@ CONFIG_PFLASH_CFI01=y
> CONFIG_PFLASH_CFI02=y
> CONFIG_PTIMER=y
> CONFIG_I8259=y
> +CONFIG_XILINX=y
> diff --git a/default-configs/ppc64-softmmu.mak
> b/default-configs/ppc64-softmmu.mak
> index f490368..e4265b4 100644
> --- a/default-configs/ppc64-softmmu.mak
> +++ b/default-configs/ppc64-softmmu.mak
> @@ -33,3 +33,4 @@ CONFIG_PFLASH_CFI01=y
> CONFIG_PFLASH_CFI02=y
> CONFIG_PTIMER=y
> CONFIG_I8259=y
> +CONFIG_XILINX=y
> diff --git a/default-configs/ppcemb-softmmu.mak
> b/default-configs/ppcemb-softmmu.mak
> index 829f462..aaa9cdc 100644
> --- a/default-configs/ppcemb-softmmu.mak
> +++ b/default-configs/ppcemb-softmmu.mak
> @@ -33,3 +33,4 @@ CONFIG_PFLASH_CFI01=y
> CONFIG_PFLASH_CFI02=y
> CONFIG_PTIMER=y
> CONFIG_I8259=y
> +CONFIG_XILINX=y
> diff --git a/hw/Makefile.objs b/hw/Makefile.objs
> index 7e17504..102ebcf 100644
> --- a/hw/Makefile.objs
> +++ b/hw/Makefile.objs
> @@ -59,6 +59,11 @@ hw-obj-$(CONFIG_PIIX4) += piix4.o
> hw-obj-$(CONFIG_G364FB) += g364fb.o
> hw-obj-$(CONFIG_JAZZ_LED) += jazz_led.o
>
> +# Xilinx devices
> +hw-obj-$(CONFIG_XILINX) += xilinx_intc.o
> +hw-obj-$(CONFIG_XILINX) += xilinx_timer.o
> +hw-obj-$(CONFIG_XILINX) += xilinx_uartlite.o
> +
Hi Andreas,
whats the plan with xilinx_axidma xilinx_axienet and xilinx_ethlite?
Should be fold them into this CONFIG_ or are these the exceptions to
the rule as they are the annoying endian dependent ones?
Regards,
Peter
> # PCI watchdog devices
> hw-obj-$(CONFIG_PCI) += wdt_i6300esb.o
>
> diff --git a/hw/microblaze/Makefile.objs b/hw/microblaze/Makefile.objs
> index 020f7b6..59ea20f 100644
> --- a/hw/microblaze/Makefile.objs
> +++ b/hw/microblaze/Makefile.objs
> @@ -3,9 +3,6 @@ obj-y += petalogix_ml605_mmu.o
> obj-y += microblaze_boot.o
>
> obj-y += microblaze_pic_cpu.o
> -obj-y += xilinx_intc.o
> -obj-y += xilinx_timer.o
> -obj-y += xilinx_uartlite.o
> obj-y += xilinx_ethlite.o
> obj-y += xilinx_axidma.o
> obj-y += xilinx_axienet.o
> diff --git a/hw/ppc/Makefile.objs b/hw/ppc/Makefile.objs
> index 842e7b9..6f5757f 100644
> --- a/hw/ppc/Makefile.objs
> +++ b/hw/ppc/Makefile.objs
> @@ -24,9 +24,6 @@ obj-y += openpic.o
> obj-$(CONFIG_FDT) += ../device_tree.o
>
> # Xilinx PPC peripherals
> -obj-y += xilinx_intc.o
> -obj-y += xilinx_timer.o
> -obj-y += xilinx_uartlite.o
> obj-y += xilinx_ethlite.o
>
> obj-y := $(addprefix ../,$(obj-y))
> --
> 1.7.7
>
>