[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions
From: |
Jia Liu |
Subject: |
Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions |
Date: |
Sun, 15 Jul 2012 21:31:25 +0800 |
Hi Blue,
On Sun, Jul 15, 2012 at 3:54 PM, Blue Swirl <address@hidden> wrote:
> On Sun, Jul 15, 2012 at 12:39 AM, Jia Liu <address@hidden> wrote:
>> Hi Blue
>>
>> On Sat, Jul 14, 2012 at 10:42 PM, Blue Swirl <address@hidden> wrote:
>>> On Sat, Jul 14, 2012 at 2:08 PM, Jia Liu <address@hidden> wrote:
>>>> Hi Max
>>>>
>>>> On Sat, Jul 14, 2012 at 9:49 PM, Max Filippov <address@hidden> wrote:
>>>>>>> I don't think so, please check for example target-ppc/translate.c:4192
>>>>>>> on how supervisor only mfsr is handled there.
>>>>>>>
>>>>>>
>>>>>> Thank you for comment, Blue.
>>>>>>
>>>>>> is this code OK?
>>>>>
>>>>> Shouldn't there also be an exception in softmmu mode
>>>>> if the CPU is not in supervisor mode?
>>>>>
>>>>
>>>> Sorry, I...
>>>> May you give me more comment? I'm not sure about this.
>>>
>>> If a user tries to execute a supervisor instruction (only allowed for
>>> kernel level code, not applications), the instruction won't be
>>> executed but an exception will be raised.
>>>
>>> This is the PPC mfsr instruction part of target-ppc/translate.c:
>>> /* mfsr */
>>> static void gen_mfsr(DisasContext *ctx)
>>> {
>>> #if defined(CONFIG_USER_ONLY)
>>> gen_inval_exception(ctx, POWERPC_EXCP_PRIV_REG);
>>> #else
>>> TCGv t0;
>>> if (unlikely(!ctx->mem_idx)) {
>>>
>>> Here the MMU mode is checked for user mode. I'd use more explicit
>>> check ctx->mmu_idx == MMU_USER_IDX.
>>>
>>> gen_inval_exception(ctx, POWERPC_EXCP_PRIV_REG);
>>> return;
>>> }
>>> t0 = tcg_const_tl(SR(ctx->opcode));
>>> gen_helper_load_sr(cpu_gpr[rD(ctx->opcode)], cpu_env, t0);
>>> tcg_temp_free(t0);
>>> #endif
>>> }
>>>
>>
>> Thank you very much for this nice example.
>> Is this code OK?
>> case 0x2d: /* l.mfspr */
>> LOG_DIS("l.mfspr r%d, r%d, %d\n", rd, ra, I16);
>> {
>> #if defined(CONFIG_USER_ONLY)
>> gen_illegal_exception(dc);
>> #else
>> TCGv_i32 ti = tcg_const_i32(I16);
>> if (dc->mem_idx == MMU_USER_IDX) {
>> gen_illegal_exception(dc);
>> return;
>> }
>> gen_helper_mfspr(cpu_R[rd], cpu_env, cpu_R[rd], cpu_R[ra], ti);
>> tcg_temp_free_i32(ti);
>> #endif
>> }
>> break;
>>
>> case 0x30: /* l.mtspr */
>> LOG_DIS("l.mtspr %d, r%d, r%d, %d\n", I5, ra, rb, I11);
>> {
>> #if defined(CONFIG_USER_ONLY)
>> gen_illegal_exception(dc);
>
> Maybe return?
Thank you! I think return is a better way.
>
>> #else
>> TCGv_i32 im = tcg_const_i32(tmp);
>> if (dc->mem_idx == MMU_USER_IDX) {
>> gen_illegal_exception(dc);
>> return;
>> }
>> gen_helper_mtspr(cpu_env, cpu_R[ra], cpu_R[rb], im);
>> tcg_temp_free_i32(im);
>> #endif
>> }
>> break;
>
>
> Otherwise looks OK. Perhaps there are other supervisor mode only
> instructions which need this kind of checks?
>
I'll make a check, thank you.
>>
>>
>>>>
>>>>>>
>>>>>> case 0x2d: /* l.mfspr */
>>>>>> LOG_DIS("l.mfspr r%d, r%d, %d\n", rd, ra, I16);
>>>>>> {
>>>>>> #if defined(CONFIG_USER_ONLY)
>>>>>> gen_illegal_exception(dc);
>>>>>> #else
>>>>>> TCGv_i32 ti = tcg_const_i32(I16);
>>>>>> gen_helper_mfspr(cpu_R[rd], cpu_env, cpu_R[rd], cpu_R[ra],
>>>>>> ti);
>>>>>> tcg_temp_free_i32(ti);
>>>>>> #endif
>>>>>> }
>>>>>> break;
>>>>>>
>>>>>> case 0x30: /* l.mtspr */
>>>>>> LOG_DIS("l.mtspr %d, r%d, r%d, %d\n", I5, ra, rb, I11);
>>>>>> {
>>>>>> #if defined(CONFIG_USER_ONLY)
>>>>>> gen_illegal_exception(dc);
>>>>>> #else
>>>>>> TCGv_i32 im = tcg_const_i32(tmp);
>>>>>> gen_helper_mtspr(cpu_env, cpu_R[ra], cpu_R[rb], im);
>>>>>> tcg_temp_free_i32(im);
>>>>>> #endif
>>>>>> }
>>>>>> break;
>>>>>>
>>>>>
>>>>> --
>>>>> Thanks.
>>>>> -- Max
>>>>
>>>> Regards,
>>>> Jia.
>>
>> Regards,
>> Jia
Regards,
Jia
- [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, (continued)
- [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Jia Liu, 2012/07/13
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Max Filippov, 2012/07/13
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Jia Liu, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Blue Swirl, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Jia Liu, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Max Filippov, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Jia Liu, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Blue Swirl, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Jia Liu, 2012/07/14
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions, Blue Swirl, 2012/07/15
- Re: [Qemu-devel] [PATCH v9 11/15] target-or32: Add system instructions,
Jia Liu <=
[Qemu-devel] [PATCH v9 12/15] target-or32: Add gdb stub support, Jia Liu, 2012/07/13
[Qemu-devel] [PATCH v9 13/15] target-or32: Add linux syscall, signal and termbits, Jia Liu, 2012/07/13
[Qemu-devel] [PATCH v9 14/15] target-or32: Add linux user support, Jia Liu, 2012/07/13
[Qemu-devel] [PATCH v9 15/15] target-or32: Add testcases, Jia Liu, 2012/07/13
[Qemu-devel] [PATCH v9 10/15] target-or32: Add a IIS dummy board, Jia Liu, 2012/07/13
[Qemu-devel] [PATCH v9 06/15] target-or32: Add float instruction helpers, Jia Liu, 2012/07/13