[Top][All Lists]
[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH] linux-user: allow to use sudo in guest
From: |
Laurent Vivier |
Subject: |
[Qemu-devel] [PATCH] linux-user: allow to use sudo in guest |
Date: |
Thu, 20 Dec 2012 21:56:59 +0100 |
When qemu-linux-user is used in a linux container or chroot,
if it needs to load binaries with SUID/SGID bits, it needs to
have root rights to be able to change UID/GID. To do that, we
need to install it with SUID bits and root owner.
Then, if the SUID bit is not set on the binary to load,
qemu will set its UID to the saved UID (the current user ID).
To be able to retrieve unsecure environment variables (LD_PRELOAD,
LD_LIBRARY_PATH) with SUID bit, we need to disable "unsetenv()".
Otherwise libc unsets these variables before entering in main()
To enable this feature, add "--suid-able" to the configure parameters.
You can check all is working fine with :
- install qemu-<arch> in your <arch> root filesystem environment
and chown root:root ... and chmow +s ...
- check sudo in this environment (chroot or linux container) :
address@hidden $ id
uid=1000(laurent) gid=1000(laurent) groups=1000(laurent)
address@hidden $ sudo id
Password:
uid=0(root) gid=0(root) groups=0(root)
- check LD_PRELOAD is available (debian fakeroot is my testcase) :
address@hidden $ fakeroot id
uid=0(root) gid=0(root) groups=1000(laurent)
address@hidden $ rm -f toto
address@hidden $ fakeroot
address@hidden # touch toto
address@hidden # ls -l toto
-rw-r--r-- 1 root root 0 2012-12-18 22:50 toto
address@hidden # exit
exit
address@hidden # ls -l toto
-rw-r--r-- 1 laurent laurent 0 2012-12-18 22:50 toto
Signed-off-by: Laurent Vivier <address@hidden>
---
configure | 15 +++++++++++++++
linux-user/linuxload.c | 16 +++++++++++-----
linux-user/main.c | 20 ++++++++++++++++++++
3 files changed, 46 insertions(+), 5 deletions(-)
diff --git a/configure b/configure
index b101d5c..2322387 100755
--- a/configure
+++ b/configure
@@ -111,6 +111,7 @@ source_path=`dirname "$0"`
cpu=""
interp_prefix="/usr/gnemul/qemu-%M"
static="no"
+suidable="no"
cross_prefix=""
audio_drv_list=""
audio_card_list="ac97 es1370 sb16 hda"
@@ -624,6 +625,9 @@ for opt do
LDFLAGS="-static $LDFLAGS"
QEMU_PKG_CONFIG_FLAGS="--static $QEMU_PKG_CONFIG_FLAGS"
;;
+ --suid-able)
+ suidable="yes"
+ ;;
--mandir=*) mandir="$optarg"
;;
--bindir=*) bindir="$optarg"
@@ -885,6 +889,11 @@ for opt do
esac
done
+if test "$suidable" = "yes" -a "$static" = "no" ; then
+ echo "ERROR: --suid-able needs --static"
+ exit 1
+fi
+
case "$cpu" in
sparc)
LDFLAGS="-m32 $LDFLAGS"
@@ -1014,6 +1023,7 @@ echo " --install=INSTALL use specified install
[$install]"
echo " --python=PYTHON use specified python [$python]"
echo " --smbd=SMBD use specified smbd [$smbd]"
echo " --static enable static build [$static]"
+echo " --suid-able allow to use qemu with SUID bit [$suidable]"
echo " --mandir=PATH install man pages in PATH"
echo " --datadir=PATH install firmware in PATH$confsuffix"
echo " --docdir=PATH install documentation in PATH$confsuffix"
@@ -3196,6 +3206,7 @@ echo "sparse enabled $sparse"
echo "strip binaries $strip_opt"
echo "profiler $profiler"
echo "static build $static"
+echo "suid-able $suidable"
echo "-Werror enabled $werror"
if test "$darwin" = "yes" ; then
echo "Cocoa support $cocoa"
@@ -4160,6 +4171,10 @@ if test "$target_linux_user" = "yes" -o
"$target_bsd_user" = "yes" ; then
;;
esac
fi
+if test "$target_linux_user" = "yes" -a "$suidable" = "yes" ; then
+ ldflags="$ldflags -Wl,--wrap=__unsetenv"
+ echo "CONFIG_SUIDABLE=y" >> $config_target_mak
+fi
echo "LDFLAGS+=$ldflags" >> $config_target_mak
echo "QEMU_CFLAGS+=$cflags" >> $config_target_mak
diff --git a/linux-user/linuxload.c b/linux-user/linuxload.c
index 381ab89..783afce 100644
--- a/linux-user/linuxload.c
+++ b/linux-user/linuxload.c
@@ -58,11 +58,6 @@ static int prepare_binprm(struct linux_binprm *bprm)
bprm->e_uid = geteuid();
bprm->e_gid = getegid();
- /* Set-uid? */
- if(mode & S_ISUID) {
- bprm->e_uid = st.st_uid;
- }
-
/* Set-gid? */
/*
* If setgid is set but no group execute bit then this
@@ -72,6 +67,17 @@ static int prepare_binprm(struct linux_binprm *bprm)
if ((mode & (S_ISGID | S_IXGRP)) == (S_ISGID | S_IXGRP)) {
bprm->e_gid = st.st_gid;
}
+#if defined(CONFIG_SUIDABLE)
+ setresgid(getgid(), bprm->e_gid, bprm->e_gid);
+#endif
+
+ /* Set-uid? */
+ if(mode & S_ISUID) {
+ bprm->e_uid = st.st_uid;
+ }
+#if defined(CONFIG_SUIDABLE)
+ setresuid(getuid(), bprm->e_uid, bprm->e_uid);
+#endif
retval = read(bprm->fd, bprm->buf, BPRM_BUF_SIZE);
if (retval < 0) {
diff --git a/linux-user/main.c b/linux-user/main.c
index f6c4c8d..dd9dd24 100644
--- a/linux-user/main.c
+++ b/linux-user/main.c
@@ -3385,6 +3385,20 @@ static int parse_args(int argc, char **argv)
return optind;
}
+#if defined(CONFIG_SUIDABLE)
+static int allow_unsetenv = 0;
+
+int __wrap___unsetenv(const char *name);
+int __real___unsetenv(const char *name);
+int
+__wrap___unsetenv(const char *name)
+{
+ if (!allow_unsetenv)
+ return 0;
+ return __real___unsetenv(name);
+}
+#endif
+
int main(int argc, char **argv, char **envp)
{
const char *log_file = DEBUG_LOGFILE;
@@ -3400,6 +3414,12 @@ int main(int argc, char **argv, char **envp)
int i;
int ret;
+#if defined(CONFIG_SUIDABLE)
+ allow_unsetenv = 1;
+ seteuid(getuid());
+ setegid(getgid());
+#endif
+
module_call_init(MODULE_INIT_QOM);
qemu_cache_utils_init(envp);
--
1.7.10.4
[Prev in Thread] |
Current Thread |
[Next in Thread] |
- [Qemu-devel] [PATCH] linux-user: allow to use sudo in guest,
Laurent Vivier <=