qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[Qemu-devel] [PATCH v11 3/3] xilinx_zynq: added pl330 to machine model


From: Peter Crosthwaite
Subject: [Qemu-devel] [PATCH v11 3/3] xilinx_zynq: added pl330 to machine model
Date: Wed, 27 Feb 2013 15:17:12 +1000

Signed-off-by: Peter Crosthwaite <address@hidden>
---
changed from v9:
static const'ified dma_irqs array (Blue review)

 hw/xilinx_zynq.c |   24 ++++++++++++++++++++++++
 1 files changed, 24 insertions(+), 0 deletions(-)

diff --git a/hw/xilinx_zynq.c b/hw/xilinx_zynq.c
index 311f791..74c30aa 100644
--- a/hw/xilinx_zynq.c
+++ b/hw/xilinx_zynq.c
@@ -35,6 +35,10 @@
 
 #define IRQ_OFFSET 32 /* pic interrupts start from index 32 */
 
+static const int dma_irqs[8] = {
+    46, 47, 48, 49, 72, 73, 74, 75
+};
+
 static struct arm_boot_info zynq_binfo = {};
 
 static void gem_init(NICInfo *nd, uint32_t base, qemu_irq irq)
@@ -187,6 +191,26 @@ static void zynq_init(QEMUMachineInitArgs *args)
         }
     }
 
+    dev = qdev_create(NULL, "pl330");
+    qdev_prop_set_uint8(dev, "num_chnls",  8);
+    qdev_prop_set_uint8(dev, "num_periph_req",  4);
+    qdev_prop_set_uint8(dev, "num_events",  16);
+
+    qdev_prop_set_uint8(dev, "data_width",  64);
+    qdev_prop_set_uint8(dev, "wr_cap",  8);
+    qdev_prop_set_uint8(dev, "wr_q_dep",  16);
+    qdev_prop_set_uint8(dev, "rd_cap",  8);
+    qdev_prop_set_uint8(dev, "rd_q_dep",  16);
+    qdev_prop_set_uint16(dev, "data_buffer_dep",  256);
+
+    qdev_init_nofail(dev);
+    busdev = SYS_BUS_DEVICE(dev);
+    sysbus_mmio_map(busdev, 0, 0xF8003000);
+    sysbus_connect_irq(busdev, 0, pic[45-IRQ_OFFSET]); /* abort irq line */
+    for (n = 0; n < 8; ++n) { /* event irqs */
+        sysbus_connect_irq(busdev, n + 1, pic[dma_irqs[n] - IRQ_OFFSET]);
+    }
+
     zynq_binfo.ram_size = ram_size;
     zynq_binfo.kernel_filename = kernel_filename;
     zynq_binfo.kernel_cmdline = kernel_cmdline;
-- 
1.7.0.4




reply via email to

[Prev in Thread] Current Thread [Next in Thread]