[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH 5/5] Switch to efi-enabled nic roms by default
From: |
Gerd Hoffmann |
Subject: |
[Qemu-devel] [PATCH 5/5] Switch to efi-enabled nic roms by default |
Date: |
Mon, 4 Mar 2013 11:07:33 +0100 |
All PCI nics are switched to EFI-enabled roms by default. They are
composed from three images (legacy, efi ia32 & efi x86), so classic
pxe booting will continue to work.
Exception: eepro100 is not switched, it uses a single rom for all
emulated eepro100 variants, then goes patch the rom header on the
fly with the correct PCI IDs. I doubt that will work as-is with
the efi roms.
Keep old roms for 1.4+older machine types via compat properties,
needed because the efi-enabled roms are larger so the pci rom bar
size would change.
Signed-off-by: Gerd Hoffmann <address@hidden>
---
hw/e1000.c | 2 +-
hw/ne2000.c | 2 +-
hw/pc.h | 24 ++++++++++++++++++++++--
hw/pcnet-pci.c | 2 +-
hw/rtl8139.c | 2 +-
hw/virtio-pci.c | 2 +-
6 files changed, 27 insertions(+), 7 deletions(-)
diff --git a/hw/e1000.c b/hw/e1000.c
index d6fe815..c95304f 100644
--- a/hw/e1000.c
+++ b/hw/e1000.c
@@ -1353,7 +1353,7 @@ static void e1000_class_init(ObjectClass *klass, void
*data)
k->init = pci_e1000_init;
k->exit = pci_e1000_uninit;
- k->romfile = "pxe-e1000.rom";
+ k->romfile = "efi-e1000.rom";
k->vendor_id = PCI_VENDOR_ID_INTEL;
k->device_id = E1000_DEVID;
k->revision = 0x03;
diff --git a/hw/ne2000.c b/hw/ne2000.c
index 3dd1c84..ba86701 100644
--- a/hw/ne2000.c
+++ b/hw/ne2000.c
@@ -766,7 +766,7 @@ static void ne2000_class_init(ObjectClass *klass, void
*data)
k->init = pci_ne2000_init;
k->exit = pci_ne2000_exit;
- k->romfile = "pxe-ne2k_pci.rom",
+ k->romfile = "efi-ne2k_pci.rom",
k->vendor_id = PCI_VENDOR_ID_REALTEK;
k->device_id = PCI_DEVICE_ID_REALTEK_8029;
k->class_id = PCI_CLASS_NETWORK_ETHERNET;
diff --git a/hw/pc.h b/hw/pc.h
index da1b102..30b0cf5 100644
--- a/hw/pc.h
+++ b/hw/pc.h
@@ -212,10 +212,30 @@ int e820_add_entry(uint64_t, uint64_t, uint32_t);
.driver = "ide-drive",\
.property = "discard_granularity",\
.value = stringify(0),\
- },{\
+ },{\
.driver = "virtio-blk-pci",\
.property = "discard_granularity",\
.value = stringify(0),\
- }
+ },{\
+ .driver = "e1000",\
+ .property = "romfile",\
+ .value = "pxe-e1000.rom",\
+ },{\
+ .driver = "ne2k_pci",\
+ .property = "romfile",\
+ .value = "pxe-ne2k_pci.rom",\
+ },{\
+ .driver = "pcnet",\
+ .property = "romfile",\
+ .value = "pxe-pcnet.rom",\
+ },{\
+ .driver = "rtl8139",\
+ .property = "romfile",\
+ .value = "pxe-rtl8139.rom",\
+ },{\
+ .driver = "virtio-net-pci",\
+ .property = "romfile",\
+ .value = "pxe-virtio.rom",\
+ }
#endif
diff --git a/hw/pcnet-pci.c b/hw/pcnet-pci.c
index df63b22..e89e5fa 100644
--- a/hw/pcnet-pci.c
+++ b/hw/pcnet-pci.c
@@ -351,7 +351,7 @@ static void pcnet_class_init(ObjectClass *klass, void *data)
k->init = pci_pcnet_init;
k->exit = pci_pcnet_uninit;
- k->romfile = "pxe-pcnet.rom",
+ k->romfile = "efi-pcnet.rom",
k->vendor_id = PCI_VENDOR_ID_AMD;
k->device_id = PCI_DEVICE_ID_AMD_LANCE;
k->revision = 0x10;
diff --git a/hw/rtl8139.c b/hw/rtl8139.c
index d7716be..fc2c7f1 100644
--- a/hw/rtl8139.c
+++ b/hw/rtl8139.c
@@ -3530,7 +3530,7 @@ static void rtl8139_class_init(ObjectClass *klass, void
*data)
k->init = pci_rtl8139_init;
k->exit = pci_rtl8139_uninit;
- k->romfile = "pxe-rtl8139.rom";
+ k->romfile = "efi-rtl8139.rom";
k->vendor_id = PCI_VENDOR_ID_REALTEK;
k->device_id = PCI_DEVICE_ID_REALTEK_8139;
k->revision = RTL8139_PCI_REVID; /* >=0x20 is for 8139C+ */
diff --git a/hw/virtio-pci.c b/hw/virtio-pci.c
index a869f53..e24b20f 100644
--- a/hw/virtio-pci.c
+++ b/hw/virtio-pci.c
@@ -1137,7 +1137,7 @@ static void virtio_net_class_init(ObjectClass *klass,
void *data)
k->init = virtio_net_init_pci;
k->exit = virtio_net_exit_pci;
- k->romfile = "pxe-virtio.rom";
+ k->romfile = "efi-virtio.rom";
k->vendor_id = PCI_VENDOR_ID_REDHAT_QUMRANET;
k->device_id = PCI_DEVICE_ID_VIRTIO_NET;
k->revision = VIRTIO_PCI_ABI_VERSION;
--
1.7.9.7
- [Qemu-devel] [PATCH 0/5] ipxe: add efi support, Gerd Hoffmann, 2013/03/04
- [Qemu-devel] [PATCH 4/5] Add efi rom binaries, Gerd Hoffmann, 2013/03/04
- [Qemu-devel] [PATCH 2/5] Update ipxe submodule to latest master, Gerd Hoffmann, 2013/03/04
- [Qemu-devel] [PATCH 1/5] Add Makefile rules to build nic rom binaries, Gerd Hoffmann, 2013/03/04
- [Qemu-devel] [PATCH 3/5] Add Makefile rules to build nic rom binaries with efi support, Gerd Hoffmann, 2013/03/04
- [Qemu-devel] [PATCH 5/5] Switch to efi-enabled nic roms by default,
Gerd Hoffmann <=
- Re: [Qemu-devel] [PATCH 0/5] ipxe: add efi support, Anthony Liguori, 2013/03/04