[Qemu-devel] [PATCH 2/6] iscsi: add iscsi_truncate support

[Paolo Bonzini]

From: Peter Lieven <address@hidden>

this patch adds iscsi_truncate which effectively allows for
online resizing of iscsi volumes. for this to work you have
to resize the volume on your storage and then call
block_resize command in qemu which will issue a
readcapacity16 to update the capacity.

v4:
  - factor out complete readcapacity logic into a separate function
  - handle capacity change check condition in readcapacity function
    (this happens if the block_resize cmd is the first iscsi task
    executed after a resize on the storage)

v3:
  - remove switch statement in iscsi_open
  - create separate patch for brdv_drain_all() in bdrv_truncate()

v2:
  - add a general bdrv_drain_all() before bdrv_truncate() to avoid
    in-flight AIOs while the device is truncated
  - since no AIOs are in flight we can use a sync libiscsi call
    to re-read the capacity
  - factor out the readcapacity16 logic as it is redundant
    to iscsi_open() and iscsi_truncate().

Signed-off-by: Peter Lieven <address@hidden>
[allow any type of unit attention check condition in iscsi_readcapacity_sync(),
 as in Message-ID: <address@hidden> - Paolo]
Signed-off-by: Paolo Bonzini <address@hidden>
---
 block/iscsi.c | 135 ++++++++++++++++++++++++++++++++++++++--------------------
 1 file changed, 88 insertions(+), 47 deletions(-)

diff --git a/block/iscsi.c b/block/iscsi.c
index 439af6f..3d52921 100644
--- a/block/iscsi.c
+++ b/block/iscsi.c
@@ -938,6 +938,71 @@ static void iscsi_nop_timed_event(void *opaque)
 }
 #endif
 
+static int iscsi_readcapacity_sync(IscsiLun *iscsilun)
+{
+    struct scsi_task *task = NULL;
+    struct scsi_readcapacity10 *rc10 = NULL;
+    struct scsi_readcapacity16 *rc16 = NULL;
+    int ret = 0;
+    int retries = ISCSI_CMD_RETRIES; 
+
+try_again:
+    switch (iscsilun->type) {
+    case TYPE_DISK:
+        task = iscsi_readcapacity16_sync(iscsilun->iscsi, iscsilun->lun);
+        if (task == NULL || task->status != SCSI_STATUS_GOOD) {
+            if (task != NULL && task->status == SCSI_STATUS_CHECK_CONDITION
+                    && task->sense.key == SCSI_SENSE_UNIT_ATTENTION
+                    && retries-- > 0) {
+                scsi_free_scsi_task(task);
+                goto try_again;
+            }
+            error_report("iSCSI: failed to send readcapacity16 command.");
+            ret = -EINVAL;
+            goto out;
+        }
+        rc16 = scsi_datain_unmarshall(task);
+        if (rc16 == NULL) {
+            error_report("iSCSI: Failed to unmarshall readcapacity16 data.");
+            ret = -EINVAL;
+            goto out;
+        }
+        iscsilun->block_size = rc16->block_length;
+        iscsilun->num_blocks = rc16->returned_lba + 1;
+        break;
+    case TYPE_ROM:
+        task = iscsi_readcapacity10_sync(iscsilun->iscsi, iscsilun->lun, 0, 0);
+        if (task == NULL || task->status != SCSI_STATUS_GOOD) {
+            error_report("iSCSI: failed to send readcapacity10 command.");
+            ret = -EINVAL;
+            goto out;
+        }
+        rc10 = scsi_datain_unmarshall(task);
+        if (rc10 == NULL) {
+            error_report("iSCSI: Failed to unmarshall readcapacity10 data.");
+            ret = -EINVAL;
+            goto out;
+        }
+        iscsilun->block_size = rc10->block_size;
+        if (rc10->lba == 0) {
+            /* blank disk loaded */
+            iscsilun->num_blocks = 0;
+        } else {
+            iscsilun->num_blocks = rc10->lba + 1;
+        }
+        break;
+    default:
+        break;
+    }
+
+out:
+    if (task) {
+        scsi_free_scsi_task(task);
+    }
+
+    return ret;
+}
+
 /*
  * We support iscsi url's on the form
  * iscsi://[<username>%<password>@]<host>[:<port>]/<targetname>/<lun>
@@ -949,8 +1014,6 @@ static int iscsi_open(BlockDriverState *bs, const char 
*filename, int flags)
     struct iscsi_url *iscsi_url = NULL;
     struct scsi_task *task = NULL;
     struct scsi_inquiry_standard *inq = NULL;
-    struct scsi_readcapacity10 *rc10 = NULL;
-    struct scsi_readcapacity16 *rc16 = NULL;
     char *initiator_name = NULL;
     int ret;
 
@@ -1040,50 +1103,9 @@ static int iscsi_open(BlockDriverState *bs, const char 
*filename, int flags)
 
     iscsilun->type = inq->periperal_device_type;
 
-    scsi_free_scsi_task(task);
-
-    switch (iscsilun->type) {
-    case TYPE_DISK:
-        task = iscsi_readcapacity16_sync(iscsi, iscsilun->lun);
-        if (task == NULL || task->status != SCSI_STATUS_GOOD) {
-            error_report("iSCSI: failed to send readcapacity16 command.");
-            ret = -EINVAL;
-            goto out;
-        }
-        rc16 = scsi_datain_unmarshall(task);
-        if (rc16 == NULL) {
-            error_report("iSCSI: Failed to unmarshall readcapacity16 data.");
-            ret = -EINVAL;
-            goto out;
-        }
-        iscsilun->block_size = rc16->block_length;
-        iscsilun->num_blocks = rc16->returned_lba + 1;
-        break;
-    case TYPE_ROM:
-        task = iscsi_readcapacity10_sync(iscsi, iscsilun->lun, 0, 0);
-        if (task == NULL || task->status != SCSI_STATUS_GOOD) {
-            error_report("iSCSI: failed to send readcapacity10 command.");
-            ret = -EINVAL;
-            goto out;
-        }
-        rc10 = scsi_datain_unmarshall(task);
-        if (rc10 == NULL) {
-            error_report("iSCSI: Failed to unmarshall readcapacity10 data.");
-            ret = -EINVAL;
-            goto out;
-        }
-        iscsilun->block_size = rc10->block_size;
-        if (rc10->lba == 0) {
-            /* blank disk loaded */
-            iscsilun->num_blocks = 0;
-        } else {
-            iscsilun->num_blocks = rc10->lba + 1;
-        }
-        break;
-    default:
-        break;
+    if ((ret = iscsi_readcapacity_sync(iscsilun)) != 0) {
+        goto out;
     }
-
     bs->total_sectors    = iscsilun->num_blocks *
                            iscsilun->block_size / BDRV_SECTOR_SIZE ;
 
@@ -1096,8 +1118,6 @@ static int iscsi_open(BlockDriverState *bs, const char 
*filename, int flags)
         bs->sg = 1;
     }
 
-    ret = 0;
-
 #if defined(LIBISCSI_FEATURE_NOP_COUNTER)
     /* Set up a timer for sending out iSCSI NOPs */
     iscsilun->nop_timer = qemu_new_timer_ms(rt_clock, iscsi_nop_timed_event, 
iscsilun);
@@ -1138,6 +1158,26 @@ static void iscsi_close(BlockDriverState *bs)
     memset(iscsilun, 0, sizeof(IscsiLun));
 }
 
+static int iscsi_truncate(BlockDriverState *bs, int64_t offset)
+{
+    IscsiLun *iscsilun = bs->opaque;
+    int ret = 0;
+
+    if (iscsilun->type != TYPE_DISK) {
+        return -ENOTSUP;
+    }
+
+    if ((ret = iscsi_readcapacity_sync(iscsilun)) != 0) {
+        return ret;
+    }
+
+    if (offset > iscsi_getlength(bs)) {
+        return -EINVAL;
+    }
+
+    return 0;
+}
+
 static int iscsi_has_zero_init(BlockDriverState *bs)
 {
     return 0;
@@ -1208,6 +1248,7 @@ static BlockDriver bdrv_iscsi = {
     .create_options  = iscsi_create_options,
 
     .bdrv_getlength  = iscsi_getlength,
+    .bdrv_truncate   = iscsi_truncate,
 
     .bdrv_aio_readv  = iscsi_aio_readv,
     .bdrv_aio_writev = iscsi_aio_writev,
-- 
1.8.1.2