qemu-devel
[Top][All Lists]
Advanced

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [Qemu-devel] [PATCH uq/master 2/2] kvm: forward INIT signals coming


From: Gleb Natapov
Subject: Re: [Qemu-devel] [PATCH uq/master 2/2] kvm: forward INIT signals coming from the chipset
Date: Sun, 10 Mar 2013 17:24:06 +0200

On Sun, Mar 10, 2013 at 04:04:39PM +0100, Paolo Bonzini wrote:
> Il 10/03/2013 15:55, Gleb Natapov ha scritto:
> > > > Why not move INIT case from below as is? Vcpu is reset to correct sate
> > > > by QEMU just like during system_reset.
> > > 
> > > APs would not be able to receive SIPIs after executing do_cpu_init,
> > > because they would stay in KVM_MP_STATE_RUNNABLE state.
> > 
> > If APs are in runnable state after reset with in kernel irq chip we
> > have a bug somewhere.
> 
> Here is where we are resetting the processor.  After clearing
> CPU_INTERRUPT_INIT, no matter what else we do (such as resetting the
> APIC and CPU), we need to set the mp_state to KVM_MP_STATE_INIT_RECEIVED.
> 
> Or if we go with your simpler hypervisor patch, we need to go to either
> KVM_MP_STATE_INIT_RECEIVED for APs (wait for SIPI) or
> KVM_MP_STATE_SIPI_RECEIVED for the BSP (restart running from the reset
> vector).
> 
No need for KVM_MP_STATE_SIPI_RECEIVED. Just make it RUNNING. This is similar to
system_reset path, not? UNINIT for AP, RUNNING for BSP.

> > Should AP be able to get SIPI without INIT after trigger of INIT# line?
> 
> Yes, the effect is the same for an INIT interrupt and the triggering of
> INIT#.
> 
Can you give me SDM pointer?

--
                        Gleb.



reply via email to

[Prev in Thread] Current Thread [Next in Thread]