[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC PATCH 3/8] memory: return MemoryRegion from qemu_ram_a
From: |
Paolo Bonzini |
Subject: |
[Qemu-devel] [RFC PATCH 3/8] memory: return MemoryRegion from qemu_ram_addr_from_host |
Date: |
Mon, 6 May 2013 16:25:16 +0200 |
It will be needed in the next patch.
The common parts of qemu_get_ram_ptr and qemu_ram_addr_from_host are
moved to a new function qemu_get_ram_block.
Signed-off-by: Paolo Bonzini <address@hidden>
---
exec.c | 35 +++++++++++++++++++++--------------
include/exec/cpu-common.h | 2 +-
target-i386/kvm.c | 4 ++--
3 files changed, 24 insertions(+), 17 deletions(-)
diff --git a/exec.c b/exec.c
index 8e46228..54b57fc 100644
--- a/exec.c
+++ b/exec.c
@@ -1287,15 +1287,7 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length)
}
#endif /* !_WIN32 */
-/* Return a host pointer to ram allocated with qemu_ram_alloc.
- With the exception of the softmmu code in this file, this should
- only be used for local memory (e.g. video ram) that the device owns,
- and knows it isn't going to access beyond the end of the block.
-
- It should not be used for general purpose DMA.
- Use cpu_physical_memory_map/cpu_physical_memory_rw instead.
- */
-void *qemu_get_ram_ptr(ram_addr_t addr)
+static RAMBlock *qemu_get_ram_block(ram_addr_t addr)
{
RAMBlock *block;
@@ -1315,6 +1307,21 @@ void *qemu_get_ram_ptr(ram_addr_t addr)
found:
ram_list.mru_block = block;
+ return block;
+}
+
+/* Return a host pointer to ram allocated with qemu_ram_alloc.
+ With the exception of the softmmu code in this file, this should
+ only be used for local memory (e.g. video ram) that the device owns,
+ and knows it isn't going to access beyond the end of the block.
+
+ It should not be used for general purpose DMA.
+ Use cpu_physical_memory_map/cpu_physical_memory_rw instead.
+ */
+void *qemu_get_ram_ptr(ram_addr_t addr)
+{
+ RAMBlock *block = qemu_get_ram_block(addr);
+
if (xen_enabled()) {
/* We need to check if the requested address is in the RAM
* because we don't want to map the entire memory in QEMU.
@@ -1394,14 +1401,14 @@ void qemu_put_ram_ptr(void *addr)
trace_qemu_put_ram_ptr(addr);
}
-int qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
+MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr)
{
RAMBlock *block;
uint8_t *host = ptr;
if (xen_enabled()) {
*ram_addr = xen_ram_addr_from_mapcache(ptr);
- return 0;
+ return qemu_get_ram_block(*ram_addr)->mr;
}
block = ram_list.mru_block;
@@ -1419,11 +1426,11 @@ int qemu_ram_addr_from_host(void *ptr, ram_addr_t
*ram_addr)
}
}
- return -1;
+ return NULL;
found:
*ram_addr = block->offset + (host - block->host);
- return 0;
+ return block->mr;
}
/* Some of the softmmu routines need to translate from a host pointer
@@ -1432,7 +1439,7 @@ ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr)
{
ram_addr_t ram_addr;
- if (qemu_ram_addr_from_host(ptr, &ram_addr)) {
+ if (qemu_ram_addr_from_host(ptr, &ram_addr) == NULL) {
fprintf(stderr, "Bad ram pointer %p\n", ptr);
abort();
}
diff --git a/include/exec/cpu-common.h b/include/exec/cpu-common.h
index 2e5f11f..84dfd3b 100644
--- a/include/exec/cpu-common.h
+++ b/include/exec/cpu-common.h
@@ -53,7 +53,7 @@ void qemu_ram_remap(ram_addr_t addr, ram_addr_t length);
void *qemu_get_ram_ptr(ram_addr_t addr);
void qemu_put_ram_ptr(void *addr);
/* This should not be used by devices. */
-int qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr);
+MemoryRegion *qemu_ram_addr_from_host(void *ptr, ram_addr_t *ram_addr);
ram_addr_t qemu_ram_addr_from_host_nofail(void *ptr);
void qemu_ram_set_idstr(ram_addr_t addr, const char *name, DeviceState *dev);
diff --git a/target-i386/kvm.c b/target-i386/kvm.c
index 9ffb6ca..7ba98cd 100644
--- a/target-i386/kvm.c
+++ b/target-i386/kvm.c
@@ -318,7 +318,7 @@ int kvm_arch_on_sigbus_vcpu(CPUState *c, int code, void
*addr)
if ((env->mcg_cap & MCG_SER_P) && addr
&& (code == BUS_MCEERR_AR || code == BUS_MCEERR_AO)) {
- if (qemu_ram_addr_from_host(addr, &ram_addr) ||
+ if (qemu_ram_addr_from_host(addr, &ram_addr) == NULL ||
!kvm_physical_memory_addr_from_host(c->kvm_state, addr, &paddr)) {
fprintf(stderr, "Hardware memory error for memory used by "
"QEMU itself instead of guest system!\n");
@@ -350,7 +350,7 @@ int kvm_arch_on_sigbus(int code, void *addr)
hwaddr paddr;
/* Hope we are lucky for AO MCE */
- if (qemu_ram_addr_from_host(addr, &ram_addr) ||
+ if (qemu_ram_addr_from_host(addr, &ram_addr) == NULL ||
!kvm_physical_memory_addr_from_host(CPU(first_cpu)->kvm_state,
addr, &paddr)) {
fprintf(stderr, "Hardware memory error for memory used by "
--
1.7.1
- [Qemu-devel] [RFC PATCH 0/8] MemoryRegion and FlatView refcounting, replace hostmem with memory_region_find, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 2/8] exec: check MRU in qemu_ram_addr_from_host, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 1/8] memory: add ref/unref calls, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 4/8] memory: ref/unref memory across address_space_map/unmap, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 3/8] memory: return MemoryRegion from qemu_ram_addr_from_host,
Paolo Bonzini <=
- [Qemu-devel] [RFC PATCH 5/8] memory: access FlatView from a local variable, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 6/8] memory: use a new FlatView pointer on every topology update, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 7/8] memory: add reference counting to FlatView, Paolo Bonzini, 2013/05/06
- [Qemu-devel] [RFC PATCH 8/8] dataplane: replace hostmem with memory_region_find, Paolo Bonzini, 2013/05/06
- Re: [Qemu-devel] [RFC PATCH 0/8] MemoryRegion and FlatView refcounting, replace hostmem with memory_region_find, liu ping fan, 2013/05/08
Re: [Qemu-devel] [RFC PATCH 0/8] MemoryRegion and FlatView refcounting, replace hostmem with memory_region_find, Stefan Hajnoczi, 2013/05/08