[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH] [KVM] Needless to update msi route when only ms
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH] [KVM] Needless to update msi route when only msi-x entry "control" section changed |
Date: |
Sun, 12 May 2013 14:48:43 +0300 |
On Tue, May 07, 2013 at 01:53:03AM +0000, Zhanghaoyu (A) wrote:
> >> >> With regard to old version linux guest(e.g., rhel-5.5), in ISR
> >> >> processing, mask and unmask msi-x vector every time, which result in
> >> >> VMEXIT, then QEMU will invoke kvm_irqchip_update_msi_route() to ask KVM
> >> >> hypervisor to update the VM irq routing table. In KVM hypervisor,
> >> >> synchronizing RCU needed after updating routing table, so much time
> >> >> consumed for waiting in wait_rcu_gp(). So CPU usage in VM is so high,
> >> >> while from the view of host, VM's total CPU usage is so low.
> >> >> Masking/unmasking msi-x vector only set msi-x entry "control" section,
> >> >> needless to update VM irq routing table.
> >> >>
> >> >> Signed-off-by: Zhang Haoyu <address@hidden>
> >> >> Signed-off-by: Huang Weidong <address@hidden>
> >> >> Signed-off-by: Qin Chuanyu <address@hidden>
> >> >> ---
> >> >> hw/i386/kvm/pci-assign.c | 3 +++
> >> >> 1 files changed, 3 insertions(+)
> >> >>
> >> >> --- a/hw/i386/kvm/pci-assign.c 2013-05-04 15:53:18.000000000 +0800
> >> >> +++ b/hw/i386/kvm/pci-assign.c 2013-05-04 15:50:46.000000000 +0800
> >> >> @@ -1576,6 +1576,8 @@ static void assigned_dev_msix_mmio_write
> >> >> MSIMessage msg;
> >> >> int ret;
> >> >>
> >> >> + /* Needless to update msi route when only msi-x entry
> >> >> "control" section changed */
> >> >> + if ((addr & (PCI_MSIX_ENTRY_SIZE - 1)) !=
> >> >> + PCI_MSIX_ENTRY_VECTOR_CTRL){
> >> >> msg.address = entry->addr_lo |
> >> >> ((uint64_t)entry->addr_hi << 32);
> >> >> msg.data = entry->data; @@ -1585,6 +1587,7 @@
> >> >> static void assigned_dev_msix_mmio_write
> >> >> if (ret) {
> >> >> error_report("Error updating irq routing entry
> >> >> (%d)", ret);
> >> >> }
> >> >> + }
> >> >> }
> >> >> }
> >> >> }
> >> >>
> >> >> Thanks,
> >> >> Zhang Haoyu
> >> >
> >> >
> >> >If guest wants to update the vector, it does it like this:
> >> >mask
> >> >update
> >> >unmask
> >> >and it looks like the only point where we update the vector is on unmask,
> >> >so this patch will mean we don't update the vector ever.
> >> >
> >> >I'm not sure this combination (old guest + legacy device assignment
> >> >framework) is worth optimizing. Can you try VFIO instead?
> >> >
> >> >But if it is, the right way to do this is probably along the lines of the
> >> >below patch. Want to try it out?
> >> >
> >> >diff --git a/kvm-all.c b/kvm-all.c
> >> >index 2d92721..afe2327 100644
> >> >--- a/kvm-all.c
> >> >+++ b/kvm-all.c
> >> >@@ -1006,6 +1006,11 @@ static int kvm_update_routing_entry(KVMState *s,
> >> > continue;
> >> > }
> >> >
> >> >+ if (entry->type == new_entry->type &&
> >> >+ entry->flags == new_entry->flags &&
> >> >+ entry->u == new_entry->u) {
> >> >+ return 0;
> >> >+ }
> >> > entry->type = new_entry->type;
> >> > entry->flags = new_entry->flags;
> >> > entry->u = new_entry->u;
> >> >
> >>
> >> union type cannot be directly compared, I tried out below patch
> >> instead,
> >> --- a/kvm-all.c 2013-05-06 09:56:38.000000000 +0800
> >> +++ b/kvm-all.c 2013-05-06 09:56:45.000000000 +0800
> >> @@ -1008,6 +1008,12 @@ static int kvm_update_routing_entry(KVMS
> >> continue;
> >> }
> >>
> >> + if (entry->type == new_entry->type &&
> >> + entry->flags == new_entry->flags &&
> >> + !memcmp(&entry->u, &new_entry->u, sizeof(entry->u))) {
> >> + return 0;
> >> + }
> >> +
> >> entry->type = new_entry->type;
> >> entry->flags = new_entry->flags;
> >> entry->u = new_entry->u;
> >>
> >> MST's patch is more universal than my first patch fixed in
> >> assigned_dev_msix_mmio_write().
> >> On the case that the msix entry's other section but "control" section is
> >> set to the identical value with old entry's, MST's patch also works.
> >> MST's patch also works on the non-passthrough scenario.
> >
> >Any numbers for either case?
> >
> I'm not sure what you said exactly means.
> Do you want me to make a further statement for comparison between above two
> patches?
> If yes, no other comments.
Sorry.
What I mean is that we'll need to know what is the
performance impact of my patch before we can
device whether to apply it.
Could you send this information please?
> >> And, after MST's patch applied, the below check in
> >> virtio_pci_vq_vector_unmask() can be removed.
> >> --- a/hw/virtio/virtio-pci.c 2013-05-04 15:53:20.000000000 +0800
> >> +++ b/hw/virtio/virtio-pci.c 2013-05-06 10:25:58.000000000 +0800
> >> @@ -619,12 +619,10 @@ static int virtio_pci_vq_vector_unmask(V
> >>
> >> if (proxy->vector_irqfd) {
> >> irqfd = &proxy->vector_irqfd[vector];
> >> - if (irqfd->msg.data != msg.data || irqfd->msg.address !=
> >> msg.address) {
> >> ret = kvm_irqchip_update_msi_route(kvm_state, irqfd->virq,
> >> msg);
> >> if (ret < 0) {
> >> return ret;
> >> }
> >> - }
> >> }
> >>
> >> /* If guest supports masking, irqfd is already setup, unmask it.
> >>
> >> Thanks,
> >> Zhang Haoyu