[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 2/9] block: vhdx - add header update capability.
From: |
Jeff Cody |
Subject: |
Re: [Qemu-devel] [PATCH 2/9] block: vhdx - add header update capability. |
Date: |
Fri, 26 Jul 2013 07:39:08 -0400 |
User-agent: |
Mutt/1.5.21 (2010-09-15) |
On Fri, Jul 26, 2013 at 02:49:04PM +0800, Fam Zheng wrote:
> On Wed, 07/24 13:54, Jeff Cody wrote:
> > This adds the ability to update the headers in a VHDX image, including
> > generating a new MS-compatible GUID.
> >
> > As VHDX depends on uuid.h, VHDX is now a configurable build option. If
> > VHDX support is enabled, that will also enable uuid as well. The
> > default is to have VHDX enabled.
> >
> > To enable/disable VHDX: --enable-vhdx, --disable-vhdx
> >
> > Signed-off-by: Jeff Cody <address@hidden>
> > ---
> > block/Makefile.objs | 2 +-
> > block/vhdx.c | 157
> > +++++++++++++++++++++++++++++++++++++++++++++++++++-
> > block/vhdx.h | 12 +++-
> > configure | 13 +++++
> > 4 files changed, 180 insertions(+), 4 deletions(-)
> >
> > diff --git a/block/Makefile.objs b/block/Makefile.objs
> > index 4cf9aa4..e5e54e6 100644
> > --- a/block/Makefile.objs
> > +++ b/block/Makefile.objs
> > @@ -2,7 +2,7 @@ block-obj-y += raw.o cow.o qcow.o vdi.o vmdk.o cloop.o
> > dmg.o bochs.o vpc.o vvfat
> > block-obj-y += qcow2.o qcow2-refcount.o qcow2-cluster.o qcow2-snapshot.o
> > qcow2-cache.o
> > block-obj-y += qed.o qed-gencb.o qed-l2-cache.o qed-table.o qed-cluster.o
> > block-obj-y += qed-check.o
> > -block-obj-y += vhdx.o
> > +block-obj-$(CONFIG_VHDX) += vhdx.o
> > block-obj-y += parallels.o blkdebug.o blkverify.o
> > block-obj-y += snapshot.o qapi.o
> > block-obj-$(CONFIG_WIN32) += raw-win32.o win32-aio.o
> > diff --git a/block/vhdx.c b/block/vhdx.c
> > index 56bc88e..13e486d 100644
> > --- a/block/vhdx.c
> > +++ b/block/vhdx.c
> > @@ -21,6 +21,7 @@
> > #include "qemu/crc32c.h"
> > #include "block/vhdx.h"
> >
> > +#include <uuid/uuid.h>
> >
> > /* Several metadata and region table data entries are identified by
> > * guids in a MS-specific GUID format. */
> > @@ -156,11 +157,40 @@ typedef struct BDRVVHDXState {
> > VHDXBatEntry *bat;
> > uint64_t bat_offset;
> >
> > + MSGUID session_guid;
> > +
> > +
> > VHDXParentLocatorHeader parent_header;
> > VHDXParentLocatorEntry *parent_entries;
> >
> > } BDRVVHDXState;
> >
> > +/* Calculates new checksum.
> > + *
> > + * Zero is substituted during crc calculation for the original crc field
> > + * crc_offset: byte offset in buf of the buffer crc
> > + * buf: buffer pointer
> > + * size: size of buffer (must be > crc_offset+4)
> > + *
> > + * Note: The resulting checksum is in the CPU endianness, not necessarily
> > + * in the file format endianness (LE). Any header export to disk
> > should
> > + * make sure that vhdx_header_le_export() is used to convert to the
> > + * correct endianness
> > + */
> > +uint32_t vhdx_update_checksum(uint8_t *buf, size_t size, int crc_offset)
> > +{
> > + uint32_t crc;
> > +
> > + assert(buf != NULL);
> > + assert(size > (crc_offset + 4));
> > +
> > + memset(buf + crc_offset, 0, sizeof(crc));
> > + crc = crc32c(0xffffffff, buf, size);
> > + memcpy(buf + crc_offset, &crc, sizeof(crc));
> > +
> > + return crc;
> > +}
> > +
> > uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
> > int crc_offset)
> > {
> > @@ -212,6 +242,24 @@ bool vhdx_checksum_is_valid(uint8_t *buf, size_t size,
> > int crc_offset)
> >
> >
> > /*
> > + * This generates a UUID that is compliant with the MS GUIDs used
> > + * in the VHDX spec (and elsewhere).
> > + *
> > + * We can do this with uuid_generate if uuid.h is present,
> > + * however not all systems have uuid and the generation is
> > + * pretty straightforward for the DCE + random usage case
> > + *
> > + */
> > +void vhdx_guid_generate(MSGUID *guid)
> > +{
> > + uuid_t uuid;
> > + assert(guid != NULL);
> > +
> > + uuid_generate(uuid);
> > + memcpy(guid, uuid, 16);
> > +}
> > +
> > +/*
> > * Per the MS VHDX Specification, for every VHDX file:
> > * - The header section is fixed size - 1 MB
> > * - The header section is always the first "object"
> > @@ -249,6 +297,107 @@ static void vhdx_header_le_import(VHDXHeader *h)
> > le64_to_cpus(&h->log_offset);
> > }
> >
> > +/* All VHDX structures on disk are little endian */
> > +static void vhdx_header_le_export(VHDXHeader *orig_h, VHDXHeader *new_h)
> > +{
> > + assert(orig_h != NULL);
> > + assert(new_h != NULL);
> > +
> > + new_h->signature = cpu_to_le32(orig_h->signature);
> > + new_h->checksum = cpu_to_le32(orig_h->checksum);
> > + new_h->sequence_number = cpu_to_le64(orig_h->sequence_number);
> > +
> > + memcpy(&new_h->file_write_guid, &orig_h->file_write_guid,
> > sizeof(MSGUID));
> > + memcpy(&new_h->data_write_guid, &orig_h->data_write_guid,
> > sizeof(MSGUID));
> > + memcpy(&new_h->log_guid, &orig_h->log_guid,
> > sizeof(MSGUID));
> > +
> > + cpu_to_leguids(&new_h->file_write_guid);
> > + cpu_to_leguids(&new_h->data_write_guid);
> > + cpu_to_leguids(&new_h->log_guid);
> > +
> > + new_h->log_version = cpu_to_le16(orig_h->log_version);
> > + new_h->version = cpu_to_le16(orig_h->version);
> > + new_h->log_length = cpu_to_le32(orig_h->log_length);
> > + new_h->log_offset = cpu_to_le64(orig_h->log_offset);
> > +}
> > +
> > +/* Update the VHDX headers
> > + *
> > + * This follows the VHDX spec procedures for header updates.
> > + *
> > + * - non-current header is updated with largest sequence number
> > + */
> > +static int vhdx_update_header(BlockDriverState *bs, BDRVVHDXState *s, bool
> > rw)
> > +{
> > + int ret = 0;
> > + int hdr_idx = 0;
> > + uint64_t header_offset = VHDX_HEADER1_OFFSET;
> > +
> > + VHDXHeader *active_header;
> > + VHDXHeader *inactive_header;
> > + VHDXHeader header_le;
> > + uint8_t *buffer;
> > +
> > + /* operate on the non-current header */
> > + if (s->curr_header == 0) {
> > + hdr_idx = 1;
> > + header_offset = VHDX_HEADER2_OFFSET;
> > + }
> > +
> > + active_header = s->headers[s->curr_header];
> > + inactive_header = s->headers[hdr_idx];
> > +
> > + inactive_header->sequence_number = active_header->sequence_number + 1;
> > +
> > + /* a new file guid must be generate before any file write, including
> > + * headers */
> > + memcpy(&inactive_header->file_write_guid, &s->session_guid,
> > + sizeof(MSGUID));
> > +
> > + /* a new data guid only needs to be generate before any guest-visible
> > + * writes, so update it if the image is opened r/w. */
> > + if (rw) {
> > + vhdx_guid_generate(&inactive_header->data_write_guid);
> > + }
> > +
> > + /* the header checksum is not over just the packed size of VHDXHeader,
> > + * but rather over the entire 'reserved' range for the header, which is
> > + * 4KB (VHDX_HEADER_SIZE). */
> > +
> > + buffer = qemu_blockalign(bs, VHDX_HEADER_SIZE);
> > + /* we can't assume the extra reserved bytes are 0 */
> > + ret = bdrv_pread(bs->file, header_offset, buffer, VHDX_HEADER_SIZE);
> > + if (ret < 0) {
> > + goto fail;
> > + }
> > + /* overwrite the actual VHDXHeader portion */
> > + memcpy(buffer, inactive_header, sizeof(VHDXHeader));
> > + inactive_header->checksum = vhdx_update_checksum(buffer,
> > + VHDX_HEADER_SIZE, 4);
> > + vhdx_header_le_export(inactive_header, &header_le);
> > + bdrv_pwrite_sync(bs->file, header_offset, &header_le,
> > sizeof(VHDXHeader));
> > + s->curr_header = hdr_idx;
> > +
> > +fail:
>
> Labeling it "fail:" is a bit misleading as normal path ends here too.
>
Good point; I'll change that to just be 'exit'.
> > + qemu_vfree(buffer);
> > + return ret;
> > +}
> > +
> > +/*
> > + * The VHDX spec calls for header updates to be performed twice, so that
> > both
> > + * the current and non-current header have valid info
> > + */
> > +static int vhdx_update_headers(BlockDriverState *bs, BDRVVHDXState *s,
> > bool rw)
> > +{
> > + int ret;
> > +
> > + ret = vhdx_update_header(bs, s, rw);
> > + if (ret < 0) {
> > + return ret;
> > + }
> > + ret = vhdx_update_header(bs, s, rw);
> > + return ret;
> > +}
> >
> > /* opens the specified header block from the VHDX file header section */
> > static int vhdx_parse_header(BlockDriverState *bs, BDRVVHDXState *s)
> > @@ -739,6 +888,11 @@ static int vhdx_open(BlockDriverState *bs, QDict
> > *options, int flags)
> > goto fail;
> > }
> >
> > + /* This is used for any header updates, for the file_write_guid.
> > + * The spec dictates that a new value should be used for the first
> > + * header update */
> > + vhdx_guid_generate(&s->session_guid);
> > +
> > ret = vhdx_parse_header(bs, s);
> > if (ret) {
> > goto fail;
> > @@ -801,8 +955,7 @@ static int vhdx_open(BlockDriverState *bs, QDict
> > *options, int flags)
> > }
> >
> > if (flags & BDRV_O_RDWR) {
> > - ret = -ENOTSUP;
> > - goto fail;
> > + vhdx_update_headers(bs, s, false);
> > }
> >
> > /* TODO: differencing files, write */
> > diff --git a/block/vhdx.h b/block/vhdx.h
> > index 1dbb320..3999cb1 100644
> > --- a/block/vhdx.h
> > +++ b/block/vhdx.h
> > @@ -309,17 +309,27 @@ typedef struct QEMU_PACKED VHDXParentLocatorEntry {
> > /* ----- END VHDX SPECIFICATION STRUCTURES ---- */
> >
> >
> > +void vhdx_guid_generate(MSGUID *guid);
> > +
> > +uint32_t vhdx_update_checksum(uint8_t *buf, size_t size, int crc_offset);
> > uint32_t vhdx_checksum_calc(uint32_t crc, uint8_t *buf, size_t size,
> > int crc_offset);
> >
> > bool vhdx_checksum_is_valid(uint8_t *buf, size_t size, int crc_offset);
> >
> >
> > -static void leguid_to_cpus(MSGUID *guid)
> > +static inline void leguid_to_cpus(MSGUID *guid)
> > {
> > le32_to_cpus(&guid->data1);
> > le16_to_cpus(&guid->data2);
> > le16_to_cpus(&guid->data3);
> > }
> >
> > +static inline void cpu_to_leguids(MSGUID *guid)
> > +{
> > + cpu_to_le32s(&guid->data1);
> > + cpu_to_le16s(&guid->data2);
> > + cpu_to_le16s(&guid->data3);
> > +}
> > +
> > #endif
> > diff --git a/configure b/configure
> > index 877a821..821b790 100755
> > --- a/configure
> > +++ b/configure
> > @@ -244,6 +244,7 @@ gtk=""
> > gtkabi="2.0"
> > tpm="no"
> > libssh2=""
> > +vhdx="yes"
> >
> > # parse CC options first
> > for opt do
> > @@ -950,6 +951,11 @@ for opt do
> > ;;
> > --enable-libssh2) libssh2="yes"
> > ;;
> > + --enable-vhdx) vhdx="yes" ;
> > + uuid="yes"
> > + ;;
> > + --disable-vhdx) vhdx="no"
> > + ;;
> > *) echo "ERROR: unknown option $opt"; show_help="yes"
> > ;;
> > esac
> > @@ -1166,6 +1172,8 @@ echo " --gcov=GCOV use specified gcov
> > [$gcov_tool]"
> > echo " --enable-tpm enable TPM support"
> > echo " --disable-libssh2 disable ssh block device support"
> > echo " --enable-libssh2 enable ssh block device support"
> > +echo " --disable-vhdx disables support for the Microsoft VHDX
> > image format"
> > +echo " --enable-vhdx enable support for the Microsoft VHDX
> > image format"
> > echo ""
> > echo "NOTE: The object files are built at the place where configure is
> > launched"
> > exit 1
> > @@ -3622,6 +3630,7 @@ echo "TPM support $tpm"
> > echo "libssh2 support $libssh2"
> > echo "TPM passthrough $tpm_passthrough"
> > echo "QOM debugging $qom_cast_debug"
> > +echo "vhdx $vhdx"
> >
> > if test "$sdl_too_old" = "yes"; then
> > echo "-> Your SDL version is too old - please upgrade to have SDL support"
> > @@ -4012,6 +4021,10 @@ if test "$virtio_blk_data_plane" = "yes" ; then
> > echo 'CONFIG_VIRTIO_BLK_DATA_PLANE=$(CONFIG_VIRTIO)' >> $config_host_mak
> > fi
> >
> > +if test "$vhdx" = "yes" ; then
> > + echo "CONFIG_VHDX=y" >> $config_host_mak
> > +fi
> > +
> > # USB host support
> > case "$usb" in
> > linux)
> > --
> > 1.8.1.4
> >
> >
>
> --
> Fam
- [Qemu-devel] [PATCH 0/9] VHDX log replay and write support, Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 1/9] block: vhdx - minor comments and typo correction., Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 3/9] block: vhdx code movement - VHDXMetadataEntries and BDRVVHDXState to header., Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 2/9] block: vhdx - add header update capability., Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 4/9] block: vhdx - log support struct and defines, Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 5/9] block: vhdx - break endian translation functions out, Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 6/9] block: vhdx - update log guid in header, and first write tracker, Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 7/9] block: vhdx - log parsing, replay, and flush support, Jeff Cody, 2013/07/24
- [Qemu-devel] [PATCH 8/9] block: vhdx - add log write support, Jeff Cody, 2013/07/24