[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v2 1/1] Make qemu_peek_buffer loop until it gets it'
From: |
Dr. David Alan Gilbert (git) |
Subject: |
[Qemu-devel] [PATCH v2 1/1] Make qemu_peek_buffer loop until it gets it's data |
Date: |
Fri, 21 Mar 2014 19:30:54 +0000 |
From: "Dr. David Alan Gilbert" <address@hidden>
Make qemu_peek_buffer repatedly call fill_buffer until it gets
all the data it requires, or until there is an error.
At the moment, qemu_peek_buffer will try one qemu_fill_buffer if there
isn't enough data waiting, however the kernel is entitled to return
just a few bytes, and still leave qemu_peek_buffer with less bytes
than it needed. I've seen this fail in a dev world, and I think it
could theoretically fail in the peeking of the subsection headers in
the current world.
Comment qemu_peek_byte to point out it's not guaranteed to work for
non-continuous peeks
Use size_t rather than int for size parameters, (and result for
those functions that never return -errno).
Signed-off-by: Dr. David Alan Gilbert <address@hidden>
---
include/migration/qemu-file.h | 13 +++++++----
qemu-file.c | 53 +++++++++++++++++++++++++++++++++++--------
2 files changed, 52 insertions(+), 14 deletions(-)
diff --git a/include/migration/qemu-file.h b/include/migration/qemu-file.h
index a191fb6..6dd728d 100644
--- a/include/migration/qemu-file.h
+++ b/include/migration/qemu-file.h
@@ -121,11 +121,16 @@ static inline void qemu_put_ubyte(QEMUFile *f, unsigned
int v)
void qemu_put_be16(QEMUFile *f, unsigned int v);
void qemu_put_be32(QEMUFile *f, unsigned int v);
void qemu_put_be64(QEMUFile *f, uint64_t v);
-int qemu_peek_buffer(QEMUFile *f, uint8_t *buf, int size, size_t offset);
-int qemu_get_buffer(QEMUFile *f, uint8_t *buf, int size);
-int qemu_peek_byte(QEMUFile *f, int offset);
+size_t qemu_peek_buffer(QEMUFile *f, uint8_t *buf, size_t size, size_t offset);
+size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size);
+/*
+ * Note that you can only peek continuous bytes from where the current pointer
+ * is; you aren't guaranteed to be able to peak to +n bytes unless you've
+ * previously peeked +n-1.
+ */
+int qemu_peek_byte(QEMUFile *f, size_t offset);
int qemu_get_byte(QEMUFile *f);
-void qemu_file_skip(QEMUFile *f, int size);
+void qemu_file_skip(QEMUFile *f, size_t size);
void qemu_update_position(QEMUFile *f, size_t size);
static inline unsigned int qemu_get_ubyte(QEMUFile *f)
diff --git a/qemu-file.c b/qemu-file.c
index e5ec798..d426136 100644
--- a/qemu-file.c
+++ b/qemu-file.c
@@ -529,7 +529,11 @@ size_t ram_control_save_page(QEMUFile *f, ram_addr_t
block_offset,
return RAM_SAVE_CONTROL_NOT_SUPP;
}
-static void qemu_fill_buffer(QEMUFile *f)
+/*
+ * Attempt to fill the buffer from the underlying file
+ * Returns the number of bytes read, or -ve value for an error.
+ */
+static int qemu_fill_buffer(QEMUFile *f)
{
int len;
int pending;
@@ -553,6 +557,8 @@ static void qemu_fill_buffer(QEMUFile *f)
} else if (len != -EAGAIN) {
qemu_file_set_error(f, len);
}
+
+ return len;
}
int qemu_get_fd(QEMUFile *f)
@@ -676,24 +682,40 @@ void qemu_put_byte(QEMUFile *f, int v)
}
}
-void qemu_file_skip(QEMUFile *f, int size)
+void qemu_file_skip(QEMUFile *f, size_t size)
{
if (f->buf_index + size <= f->buf_size) {
f->buf_index += size;
}
}
-int qemu_peek_buffer(QEMUFile *f, uint8_t *buf, int size, size_t offset)
+/*
+ * Read 'size' bytes from file (at 'offset') into buf without moving the
+ * pointer.
+ *
+ * If the underlying fd blocks, then it will return size bytes unless there
+ * was an error, in which case it will return as many as it managed to read.
+ */
+size_t qemu_peek_buffer(QEMUFile *f, uint8_t *buf, size_t size, size_t offset)
{
int pending;
int index;
assert(!qemu_file_is_writable(f));
+ assert(offset < IO_BUF_SIZE);
+ assert(size + offset < IO_BUF_SIZE);
+ /* The 1st byte to read from */
index = f->buf_index + offset;
+ /* The number of available bytes starting at index */
pending = f->buf_size - index;
- if (pending < size) {
- qemu_fill_buffer(f);
+ while (pending < size) {
+ int received = qemu_fill_buffer(f);
+
+ if (received <= 0) {
+ break;
+ }
+
index = f->buf_index + offset;
pending = f->buf_size - index;
}
@@ -709,13 +731,20 @@ int qemu_peek_buffer(QEMUFile *f, uint8_t *buf, int size,
size_t offset)
return size;
}
-int qemu_get_buffer(QEMUFile *f, uint8_t *buf, int size)
+/*
+ * Read 'size' bytes of data from the file into buf.
+ * 'size' can be larger than the internal buffer.
+ *
+ * If the underlying fd blocks, then it will return size bytes unless there
+ * was an error, in which case it will return as many as it managed to read.
+ */
+size_t qemu_get_buffer(QEMUFile *f, uint8_t *buf, size_t size)
{
- int pending = size;
- int done = 0;
+ size_t pending = size;
+ size_t done = 0;
while (pending > 0) {
- int res;
+ size_t res;
res = qemu_peek_buffer(f, buf, pending, 0);
if (res == 0) {
@@ -729,7 +758,11 @@ int qemu_get_buffer(QEMUFile *f, uint8_t *buf, int size)
return done;
}
-int qemu_peek_byte(QEMUFile *f, int offset)
+/*
+ * Peeks a single byte from the buffer; this isn't guaranteed to work if
+ * offset leaves a gap after the previous read/peeked data.
+ */
+int qemu_peek_byte(QEMUFile *f, size_t offset)
{
int index = f->buf_index + offset;
--
1.8.5.3
- [Qemu-devel] [PATCH v2 1/1] Make qemu_peek_buffer loop until it gets it's data,
Dr. David Alan Gilbert (git) <=