qemu-devel
[
Top
][
All Lists
]
Advanced
[
Date Prev
][
Date Next
][
Thread Prev
][
Thread Next
][
Date Index
][
Thread Index
]
Re: [Qemu-devel] [PATCH 1/1 V2] target-ppc: Adding Functionality to rtas
From
:
Tomohiro B Berry
Subject
:
Re: [Qemu-devel] [PATCH 1/1 V2] target-ppc: Adding Functionality to rtas_ibm_get_system_parameter.
Date
:
Thu, 17 Apr 2014 10:33:44 -0500
Hi,
I was just wondering if anything else needed to be done to get this pushed upstream?
Thanks,
Tomo
Tomohiro B Berry/Austin/address@hidden wrote on 03/20/2014 04:17:33 PM:
> From: Tomohiro B Berry/Austin/address@hidden
> To: address@hidden,
> Cc: Tomohiro B Berry/Austin/address@hidden
> Date: 03/20/2014 04:17 PM
> Subject: [PATCH 1/1 V2] target-ppc: Adding Functionality to
> rtas_ibm_get_system_parameter.
>
> This patch adds the functionality for
> rtas_ibm_get_system_parameter to return a string containing
> the values for partition_max_entitled_capacity and
> system_potential_processors.
>
> Signed-off-by: Tomo Berry <address@hidden>
> ---
> V1->V2:
> changed memory allocation to glib calls
> I'm not sure if this is meant for 2.1 or not
>
> hw/ppc/spapr_rtas.c | 32 ++++++++++++++++++++++++++++++++
> include/hw/ppc/spapr.h | 13 +++++++++++++
> 2 files changed, 45 insertions(+)
>
> diff --git a/hw/ppc/spapr_rtas.c b/hw/ppc/spapr_rtas.c
> index 1cb276d..734ebc0 100644
> --- a/hw/ppc/spapr_rtas.c
> +++ b/hw/ppc/spapr_rtas.c
> @@ -225,6 +225,9 @@ static void rtas_stop_self(PowerPCCPU *cpu,
> sPAPREnvironment *spapr,
> }
>
> #define DIAGNOSTICS_RUN_MODE 42
> +#define SPLPAR_CHARACTERISTICS_TOKEN 20
> +#define CMO_CHARACTERISTICS_TOKEN 44
> +#define CEDE_LATENCY_TOKEN 45
>
> static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
> sPAPREnvironment *spapr,
> @@ -236,6 +239,7 @@ static void rtas_ibm_get_system_parameter(PowerPCCPU *cpu,
> target_ulong buffer = rtas_ld(args, 1);
> target_ulong length = rtas_ld(args, 2);
> target_ulong ret = RTAS_OUT_NOT_SUPPORTED;
> + char *local_buffer;
>
> switch (parameter) {
> case DIAGNOSTICS_RUN_MODE:
> @@ -244,6 +248,34 @@ static void rtas_ibm_get_system_parameter
> (PowerPCCPU *cpu,
> ret = RTAS_OUT_SUCCESS;
> }
> break;
> + case SPLPAR_CHARACTERISTICS_TOKEN:
> +
> + /* Create a string of length bytes locally to copy to buffer */
> +
> + local_buffer = g_malloc0(length);
> +
> + /* These are the current system parameters supported. The first
> + * 16 bits of the buffer must contain the length of the string.
> + * These 16 bits are not included in the length of the string.
> + */
> +
> + ((uint16_t *)local_buffer)[0] = cpu_to_be16(snprintf
> (local_buffer + 2,
> + length - 2, "MaxEntCap=%d,MaxPlatProcs=%d", max_cpus,
> smp_cpus));
> +
> + rtas_st_buffer(buffer, length, (uint8_t *)local_buffer);
> +
> + g_free(local_buffer);
> + ret = RTAS_OUT_SUCCESS;
> + break;
> + case CMO_CHARACTERISTICS_TOKEN:
> + ret = RTAS_OUT_NOT_SUPPORTED;
> + break;
> + case CEDE_LATENCY_TOKEN:
> + ret = RTAS_OUT_NOT_SUPPORTED;
> + break;
> + default:
> + ret = RTAS_OUT_NOT_SUPPORTED;
> + break;
> }
>
> rtas_st(rets, 0, ret);
> diff --git a/include/hw/ppc/spapr.h b/include/hw/ppc/spapr.h
> index b2f11e9..bf5b528 100644
> --- a/include/hw/ppc/spapr.h
> +++ b/include/hw/ppc/spapr.h
> @@ -356,6 +356,19 @@ static inline void rtas_st(target_ulong phys,
> int n, uint32_t val)
> stl_be_phys(ppc64_phys_to_real(phys + 4*n), val);
> }
>
> +/* This function will store a buffer 1 byte at a time into the
> + * address at phys up to a maximum of phys_len bytes.*/
> +
> +static inline void rtas_st_buffer(target_ulong phys,
> + target_ulong phys_len,
> + uint8_t *buffer)
> +{
> + uint32_t i;
> + for (i = 0; i < phys_len; i++) {
> + stb_phys(ppc64_phys_to_real(phys + i), buffer[i]);
> + }
> +}
> +
> typedef void (*spapr_rtas_fn)(PowerPCCPU *cpu, sPAPREnvironment *spapr,
> uint32_t token,
> uint32_t nargs, target_ulong args,
> --
> 1.8.3.1
>
reply via email to
[Prev in Thread]
Current Thread
[Next in Thread]
Re: [Qemu-devel] [PATCH 1/1 V2] target-ppc: Adding Functionality to rtas_ibm_get_system_parameter.
,
Tomohiro B Berry
<=
Prev by Date:
Re: [Qemu-devel] [PATCH 2/7] megasas: Enable MSI-X support
Next by Date:
[Qemu-devel] [ANNOUNCE] QEMU 2.0.0 is now available
Previous by thread:
Re: [Qemu-devel] [PATCH] Re: snapshot: fixed bdrv_get_full_backing_filename can not get correct full_backing_filename
Next by thread:
[Qemu-devel] [ANNOUNCE] QEMU 2.0.0 is now available
Index(es):
Date
Thread