[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [RFC PATCH V4 5/6] target-arm: Common kvm_arm_vcpu_init() f
From: |
Pranavkumar Sawargaonkar |
Subject: |
[Qemu-devel] [RFC PATCH V4 5/6] target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64 |
Date: |
Mon, 5 May 2014 14:30:45 +0530 |
Introduce a common kvm_arm_vcpu_init() for doing KVM_ARM_VCPU_INIT
ioctl in KVM ARM and KVM ARM64. This also helps us factor-out few
common code lines from kvm_arch_init_vcpu() for KVM ARM/ARM64.
Signed-off-by: Pranavkumar Sawargaonkar <address@hidden>
Signed-off-by: Anup Patel <address@hidden>
---
target-arm/kvm.c | 23 +++++++++++++++++++++++
target-arm/kvm32.c | 18 +++---------------
target-arm/kvm64.c | 22 ++++++++--------------
target-arm/kvm_arm.h | 14 ++++++++++++++
4 files changed, 48 insertions(+), 29 deletions(-)
diff --git a/target-arm/kvm.c b/target-arm/kvm.c
index 39202d7..55bc3a3 100644
--- a/target-arm/kvm.c
+++ b/target-arm/kvm.c
@@ -27,6 +27,29 @@ const KVMCapabilityInfo kvm_arch_required_capabilities[] = {
KVM_CAP_LAST_INFO
};
+int kvm_arm_vcpu_init(CPUState *cs, uint32_t feature0_extra)
+{
+ ARMCPU *cpu = ARM_CPU(cs);
+ struct kvm_vcpu_init init;
+
+ if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE) {
+ fprintf(stderr, "KVM is not supported for this guest CPU type\n");
+ return -EINVAL;
+ }
+
+ init.target = cpu->kvm_target;
+ memset(init.features, 0, sizeof(init.features));
+ if (cpu->start_powered_off) {
+ init.features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
+ }
+ if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
+ init.features[0] |= 1 << KVM_ARM_VCPU_PSCI_0_2;
+ }
+ init.features[0] |= feature0_extra;
+
+ return kvm_vcpu_ioctl(cs, KVM_ARM_VCPU_INIT, &init);
+}
+
bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,
int *fdarray,
struct kvm_vcpu_init *init)
diff --git a/target-arm/kvm32.c b/target-arm/kvm32.c
index cd9ac03..0034248 100644
--- a/target-arm/kvm32.c
+++ b/target-arm/kvm32.c
@@ -166,7 +166,6 @@ static int compare_u64(const void *a, const void *b)
int kvm_arch_init_vcpu(CPUState *cs)
{
- struct kvm_vcpu_init init;
int i, ret, arraylen;
uint64_t v;
struct kvm_one_reg r;
@@ -174,23 +173,12 @@ int kvm_arch_init_vcpu(CPUState *cs)
struct kvm_reg_list *rlp;
ARMCPU *cpu = ARM_CPU(cs);
- if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE) {
- fprintf(stderr, "KVM is not supported for this guest CPU type\n");
- return -EINVAL;
- }
-
- init.target = cpu->kvm_target;
- memset(init.features, 0, sizeof(init.features));
- if (cpu->start_powered_off) {
- init.features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
- }
- if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
- init.features[0] |= 1 << KVM_ARM_VCPU_PSCI_0_2;
- }
- ret = kvm_vcpu_ioctl(cs, KVM_ARM_VCPU_INIT, &init);
+ /* Do KVM_ARM_VCPU_INIT ioctl */
+ ret = kvm_arm_vcpu_init(cs, 0x0);
if (ret) {
return ret;
}
+
/* Query the kernel to make sure it supports 32 VFP
* registers: QEMU's "cortex-a15" CPU is always a
* VFP-D32 core. The simplest way to do this is just
diff --git a/target-arm/kvm64.c b/target-arm/kvm64.c
index bc6cd74..f7cc3ef 100644
--- a/target-arm/kvm64.c
+++ b/target-arm/kvm64.c
@@ -77,29 +77,23 @@ bool kvm_arm_get_host_cpu_features(ARMHostCPUClass *ahcc)
int kvm_arch_init_vcpu(CPUState *cs)
{
- ARMCPU *cpu = ARM_CPU(cs);
- struct kvm_vcpu_init init;
int ret;
+ ARMCPU *cpu = ARM_CPU(cs);
- if (cpu->kvm_target == QEMU_KVM_ARM_TARGET_NONE ||
- !arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
- fprintf(stderr, "KVM is not supported for this guest CPU type\n");
+ if (!arm_feature(&cpu->env, ARM_FEATURE_AARCH64)) {
+ fprintf(stderr, "KVM only support Aarch64 CPU type\n");
return -EINVAL;
}
- init.target = cpu->kvm_target;
- memset(init.features, 0, sizeof(init.features));
- if (cpu->start_powered_off) {
- init.features[0] |= 1 << KVM_ARM_VCPU_POWER_OFF;
- }
- if (kvm_check_extension(cs->kvm_state, KVM_CAP_ARM_PSCI_0_2)) {
- init.features[0] |= 1 << KVM_ARM_VCPU_PSCI_0_2;
+ /* Do KVM_ARM_VCPU_INIT ioctl */
+ ret = kvm_arm_vcpu_init(cs, 0x0);
+ if (ret) {
+ return ret;
}
- ret = kvm_vcpu_ioctl(cs, KVM_ARM_VCPU_INIT, &init);
/* TODO : support for save/restore/reset of system regs via tuple list */
- return ret;
+ return 0;
}
#define AARCH64_CORE_REG(x) (KVM_REG_ARM64 | KVM_REG_SIZE_U64 | \
diff --git a/target-arm/kvm_arm.h b/target-arm/kvm_arm.h
index 137c567..1889ba1 100644
--- a/target-arm/kvm_arm.h
+++ b/target-arm/kvm_arm.h
@@ -15,6 +15,20 @@
#include "exec/memory.h"
/**
+ * kvm_arm_vcpu_init:
+ * @cs: CPUState
+ * @feature0_extra: additional features
+ *
+ * KVM ARM and KVM ARM64 need to use KVM_ARM_VCPU_INIT ioctl for
+ * init/re-init/reset the VCPU with given feature flags.
+ * This is a common function for doing KVM_ARM_VCPU_INIT ioctl
+ * independent of KVM ARM or KVM ARM64.
+ *
+ * Returns: 0 if success else < 0 error code
+ */
+int kvm_arm_vcpu_init(CPUState *cs, uint32_t feature0_extra);
+
+/**
* kvm_arm_register_device:
* @mr: memory region for this device
* @devid: the KVM device ID
--
1.7.9.5
- [Qemu-devel] [RFC PATCH V4 5/6] target-arm: Common kvm_arm_vcpu_init() for KVM ARM and KVM ARM64,
Pranavkumar Sawargaonkar <=