[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1
From: |
Fabian Aggeler |
Subject: |
[Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked |
Date: |
Wed, 11 Jun 2014 01:55:05 +0200 |
Add TTBR0 and maps secure/non-secure instance of ttbr0 and ttbr1
accordingly (translation table base register).
Signed-off-by: Fabian Aggeler <address@hidden>
---
target-arm/cpu.h | 21 +++++++++++++++++++--
target-arm/helper.c | 45 +++++++++++++++++++++++++++++++++++----------
2 files changed, 54 insertions(+), 12 deletions(-)
diff --git a/target-arm/cpu.h b/target-arm/cpu.h
index 6d3deb1..6890e82 100644
--- a/target-arm/cpu.h
+++ b/target-arm/cpu.h
@@ -203,8 +203,25 @@ typedef struct CPUARMState {
uint32_t c1_scr; /* secure config register. */
uint32_t c1_sder; /* Secure debug enable register. */
uint32_t c1_nsacr; /* Non-secure access control register. */
- uint64_t ttbr0_el1; /* MMU translation table base 0. */
- uint64_t ttbr1_el1; /* MMU translation table base 1. */
+ union { /* MMU translation table base 0. */
+ struct {
+ uint64_t ttbr0_ns;
+ uint64_t ttbr0_s;
+ };
+ struct {
+ uint64_t ttbr0_el1;
+ uint64_t ttbr0_el3;
+ };
+ };
+ union { /* MMU translation table base 1. */
+ struct {
+ uint64_t ttbr1_ns;
+ uint64_t ttbr1_s;
+ };
+ struct {
+ uint64_t ttbr1_el1;
+ };
+ };
uint64_t c2_control; /* MMU translation table base control. */
uint32_t c2_mask; /* MMU translation table base selection mask. */
uint32_t c2_base_mask; /* MMU translation table base 0 mask. */
diff --git a/target-arm/helper.c b/target-arm/helper.c
index 69d9612..22609ed 100644
--- a/target-arm/helper.c
+++ b/target-arm/helper.c
@@ -1498,12 +1498,14 @@ static const ARMCPRegInfo vmsa_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.esr_el[1]), .resetvalue = 0, },
{ .name = "TTBR0_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 0,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_el1) } },
{ .name = "TTBR1_EL1", .state = ARM_CP_STATE_BOTH,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 1,
- .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
- .writefn = vmsa_ttbr_write, .resetvalue = 0 },
+ .access = PL1_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_el1) } },
{ .name = "TCR_EL1", .state = ARM_CP_STATE_AA64,
.opc0 = 3, .crn = 2, .crm = 0, .opc1 = 0, .opc2 = 2,
.access = PL1_RW, .writefn = vmsa_tcr_el1_write,
@@ -1744,11 +1746,13 @@ static const ARMCPRegInfo lpae_cp_reginfo[] = {
.fieldoffset = offsetof(CPUARMState, cp15.par_el1), .resetvalue = 0 },
{ .name = "TTBR0", .cp = 15, .crm = 2, .opc1 = 0,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr0_s),
+ offsetof(CPUARMState, cp15.ttbr0_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
{ .name = "TTBR1", .cp = 15, .crm = 2, .opc1 = 1,
.access = PL1_RW, .type = ARM_CP_64BIT | ARM_CP_NO_MIGRATE,
- .fieldoffset = offsetof(CPUARMState, cp15.ttbr1_el1),
+ .bank_fieldoffsets = { offsetof(CPUARMState, cp15.ttbr1_s),
+ offsetof(CPUARMState, cp15.ttbr1_ns) },
.writefn = vmsa_ttbr_write, .resetfn = arm_cp_reset_ignore },
REGINFO_SENTINEL
};
@@ -2270,6 +2274,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
.opc0 = 3, .crn = 1, .crm = 0, .opc1 = 6, .opc2 = 0,
.access = PL3_RW, .raw_writefn = raw_write, .writefn = sctlr_write,
.fieldoffset = offsetof(CPUARMState, cp15.sctlr_el3) },
+ { .name = "TTBR0_EL3", .state = ARM_CP_STATE_AA64,
+ .opc0 = 3, .crn = 2, .crm = 0, .opc1 = 6, .opc2 = 0,
+ .access = PL3_RW, .writefn = vmsa_ttbr_write, .resetvalue = 0,
+ .fieldoffset = offsetof(CPUARMState, cp15.ttbr0_el3) },
{ .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
.type = ARM_CP_NO_MIGRATE,
.opc0 = 3, .opc1 = 6, .crn = 4, .crm = 0, .opc2 = 1,
@@ -3966,10 +3974,14 @@ static uint32_t get_level1_table_address(CPUARMState
*env, uint32_t address)
{
uint32_t table;
+ /* We only get here if EL1 is running in Aarch32. If EL3 is running in
+ * Aarch32 there is a secure and non-secure instance of the translation
+ * table registers.
+ */
if (address & env->cp15.c2_mask)
- table = env->cp15.ttbr1_el1 & 0xffffc000;
+ table = A32_BANKED_CURRENT_REG_GET(env, ttbr1) & 0xffffc000;
else
- table = env->cp15.ttbr0_el1 & env->cp15.c2_base_mask;
+ table = A32_BANKED_CURRENT_REG_GET(env, ttbr0) &
env->cp15.c2_base_mask;
table |= (address >> 18) & 0x3ffc;
return table;
@@ -4215,6 +4227,7 @@ static int get_phys_addr_lpae(CPUARMState *env,
target_ulong address,
int32_t granule_sz = 9;
int32_t va_size = 32;
int32_t tbi = 0;
+ uint32_t cur_el = arm_current_pl(env);
if (arm_el_is_aa64(env, 1)) {
va_size = 64;
@@ -4266,7 +4279,19 @@ static int get_phys_addr_lpae(CPUARMState *env,
target_ulong address,
* we will always flush the TLB any time the ASID is changed).
*/
if (ttbr_select == 0) {
- ttbr = env->cp15.ttbr0_el1;
+ if (arm_el_is_aa64(env, 3)) {
+ switch (cur_el) {
+ case 3:
+ ttbr = env->cp15.ttbr0_el3;
+ break;
+ case 1:
+ case 0:
+ default:
+ ttbr = env->cp15.ttbr0_el1;
+ }
+ } else {
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr0);
+ }
epd = extract32(env->cp15.c2_control, 7, 1);
tsz = t0sz;
@@ -4278,7 +4303,7 @@ static int get_phys_addr_lpae(CPUARMState *env,
target_ulong address,
granule_sz = 11;
}
} else {
- ttbr = env->cp15.ttbr1_el1;
+ ttbr = A32_BANKED_CURRENT_REG_GET(env, ttbr1);
epd = extract32(env->cp15.c2_control, 23, 1);
tsz = t1sz;
--
1.8.3.2
- Re: [Qemu-devel] [PATCH v3 10/32] target-arm: extend Aarch64 SCR.{FIQ|IRQ} handling, (continued)
- [Qemu-devel] [PATCH v3 16/32] target-arm: add SDER definition, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 17/32] target-arm: add MVBAR support, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 18/32] target-arm: add macros to access banked registers, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 19/32] target-arm: insert Aarch32 cpregs twice into hashtable, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 20/32] target-arm: arrayfying fieldoffset for banking, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 21/32] target-arm: add SCTLR_EL3 and make SCTLR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 22/32] target-arm: make CSSELR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 23/32] target-arm: add TTBR0_EL3 and make TTBR0/1 banked,
Fabian Aggeler <=
- [Qemu-devel] [PATCH v3 24/32] target-arm: add TCR_EL3 and make TTBCR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 25/32] target-arm: make c2_mask and c2_base_mask banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 28/32] target-arm: make DFSR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 26/32] target-arm: make DACR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 27/32] target-arm: make IFSR banked, Fabian Aggeler, 2014/06/10
- [Qemu-devel] [PATCH v3 29/32] target-arm: make IFAR/DFAR banked, Fabian Aggeler, 2014/06/10