[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode
From: |
Ming Lei |
Subject: |
Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode |
Date: |
Thu, 31 Jul 2014 16:59:47 +0800 |
On Thu, Jul 31, 2014 at 7:37 AM, Paolo Bonzini <address@hidden> wrote:
> Il 30/07/2014 19:15, Ming Lei ha scritto:
>> On Wed, Jul 30, 2014 at 9:45 PM, Paolo Bonzini <address@hidden> wrote:
>>> Il 30/07/2014 13:39, Ming Lei ha scritto:
>>>> This patch introduces several APIs for supporting bypass qemu coroutine
>>>> in case of being not necessary and for performance's sake.
>>>
>>> No, this is wrong. Dataplane *must* use the same code as non-dataplane,
>>> anything else is a step backwards.
>>
>> As we saw, coroutine has brought up performance regression
>> on dataplane, and it isn't necessary to use co in some cases, is it?
>
> Yes, and it's not necessary on non-dataplane either. It's not necessary
> on virtio-scsi, and it will not be necessary on virtio-scsi dataplane
> either.
>
>>> If you want to bypass coroutines, bdrv_aio_readv/writev must detect the
>>> conditions that allow doing that and call the bdrv_aio_readv/writev
>>> directly.
>>
>> That is easy to detect, please see the 5th patch.
>
> No, that's not enough. Dataplane right now prevents block jobs, but
> that's going to change and it could require coroutines even for raw devices.
>
>>> To begin with, have you benchmarked QEMU and can you provide a trace of
>>> *where* the coroutine overhead lies?
>>
>> I guess it may be caused by the stack switch, at least in one of
>> my box, bypassing co can improve throughput by ~7%, and by
>> ~15% in another box.
>
> No guesses please. Actually that's also my guess, but since you are
> submitting the patch you must do better and show profiles where stack
> switching disappears after the patches.
Follows the below hardware events reported by 'perf stat' when running
fio randread benchmark for 2min in VM(single vq, 2 jobs):
sudo ~/bin/perf stat -e
L1-dcache-loads,L1-dcache-load-misses,cpu-cycles,instructions,branch-instructions,branch-misses,branch-loads,branch-load-misses,dTLB-loads,dTLB-load-misses
./nqemu-start-mq 4 1
1), without bypassing coroutine via forcing to set 's->raw_format ' as
false, see patch 5/15
- throughout: 95K
Performance counter stats for './nqemu-start-mq 4 1':
69,231,035,842 L1-dcache-loads
[40.10%]
1,909,978,930 L1-dcache-load-misses # 2.76% of all
L1-dcache hits [39.98%]
263,731,501,086 cpu-cycles [40.03%]
232,564,905,115 instructions # 0.88 insns per
cycle [50.23%]
46,157,868,745 branch-instructions
[49.82%]
785,618,591 branch-misses # 1.70% of all
branches [49.99%]
46,280,342,654 branch-loads
[49.95%]
34,934,790,140 branch-load-misses
[50.02%]
69,447,857,237 dTLB-loads
[40.13%]
169,617,374 dTLB-load-misses # 0.24% of all
dTLB cache hits [40.04%]
161.991075781 seconds time elapsed
2), with bypassing coroutinue
- throughput: 115K
Performance counter stats for './nqemu-start-mq 4 1':
76,784,224,509 L1-dcache-loads
[39.93%]
1,334,036,447 L1-dcache-load-misses # 1.74% of all
L1-dcache hits [39.91%]
262,697,428,470 cpu-cycles [40.03%]
255,526,629,881 instructions # 0.97 insns per
cycle [50.01%]
50,160,082,611 branch-instructions
[49.97%]
564,407,788 branch-misses # 1.13% of all
branches [50.08%]
50,331,510,702 branch-loads
[50.08%]
35,760,766,459 branch-load-misses
[50.03%]
76,706,000,951 dTLB-loads
[40.00%]
123,291,001 dTLB-load-misses # 0.16% of all
dTLB cache hits [40.02%]
162.333465490 seconds time elapsed
- [Qemu-devel] [PATCH 00/14] dataplane: optimization and multi virtqueue support, Ming Lei, 2014/07/30
- [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/30
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Paolo Bonzini, 2014/07/30
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/30
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Paolo Bonzini, 2014/07/30
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/30
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, BenoƮt Canet, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Paolo Bonzini, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode,
Ming Lei <=
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Paolo Bonzini, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Paolo Bonzini, 2014/07/31
- Re: [Qemu-devel] [PATCH 01/15] qemu coroutine: support bypass mode, Ming Lei, 2014/07/31
[Qemu-devel] [PATCH 02/15] qemu aio: prepare for supporting selective bypass coroutine, Ming Lei, 2014/07/30
[Qemu-devel] [PATCH 03/15] block: support to bypass qemu coroutinue, Ming Lei, 2014/07/30
[Qemu-devel] [PATCH 04/15] Revert "raw-posix: drop raw_get_aio_fd() since it is no longer used", Ming Lei, 2014/07/30
[Qemu-devel] [PATCH 05/15] dataplane: enable selective bypassing coroutine, Ming Lei, 2014/07/30
[Qemu-devel] [PATCH 06/15] qemu/obj_pool.h: introduce object allocation pool, Ming Lei, 2014/07/30