Re: [Qemu-devel] [PATCH v3 08/16] target-arm: Add SCR_EL3

[Edgar E. Iglesias]

On Fri, Aug 01, 2014 at 02:34:14PM +0100, Peter Maydell wrote:
> On 17 June 2014 09:45, Edgar E. Iglesias <address@hidden> wrote:
> > From: "Edgar E. Iglesias" <address@hidden>
> >
> > Signed-off-by: Edgar E. Iglesias <address@hidden>
> > ---
> >  target-arm/cpu.h    | 16 +++++++++++++++-
> >  target-arm/helper.c | 31 ++++++++++++++++++++++++++++++-
> >  2 files changed, 45 insertions(+), 2 deletions(-)
> >
> > diff --git a/target-arm/cpu.h b/target-arm/cpu.h
> > index fd57fb5..fa8dee0 100644
> > --- a/target-arm/cpu.h
> > +++ b/target-arm/cpu.h
> > @@ -172,7 +172,6 @@ typedef struct CPUARMState {
> >          uint64_t c1_sys; /* System control register.  */
> >          uint64_t c1_coproc; /* Coprocessor access register.  */
> >          uint32_t c1_xscaleauxcr; /* XScale auxiliary control register.  */
> > -        uint32_t c1_scr; /* secure config register.  */
> >          uint64_t ttbr0_el1; /* MMU translation table base 0. */
> >          uint64_t ttbr1_el1; /* MMU translation table base 1. */
> >          uint64_t c2_control; /* MMU translation table base control.  */
> > @@ -185,6 +184,7 @@ typedef struct CPUARMState {
> >          uint32_t pmsav5_data_ap; /* PMSAv5 MPU data access permissions */
> >          uint32_t pmsav5_insn_ap; /* PMSAv5 MPU insn access permissions */
> >          uint64_t hcr_el2; /* Hypervisor configuration register */
> > +        uint32_t scr_el3; /* Secure configuration register.  */
> >          uint32_t ifsr_el2; /* Fault status registers.  */
> >          uint64_t esr_el[4];
> >          uint32_t c6_region[8]; /* MPU base/size registers.  */
> > @@ -562,6 +562,20 @@ static inline void xpsr_write(CPUARMState *env, 
> > uint32_t val, uint32_t mask)
> >  #define HCR_ID        (1ULL << 33)
> >  #define HCR_MASK      ((1ULL << 34) - 1)
> >
> > +#define SCR_NS        (1U << 0)
> > +#define SCR_IRQ       (1U << 1)
> > +#define SCR_FIQ       (1U << 2)
> > +#define SCR_EA        (1U << 3)
> > +#define SCR_SMD       (1U << 7)
> > +#define SCR_HCE       (1U << 8)
> > +#define SCR_SIF       (1U << 9)
> > +#define SCR_RW        (1U << 10)
> > +#define SCR_ST        (1U << 11)
> > +#define SCR_TWI       (1U << 12)
> > +#define SCR_TWE       (1U << 13)
> > +#define SCR_RES1_MASK (3U << 4)
> > +#define SCR_MASK      (0x3fff & ~SCR_RES1_MASK)
> > +
> >  /* Return the current FPSCR value.  */
> >  uint32_t vfp_get_fpscr(CPUARMState *env);
> >  void vfp_set_fpscr(CPUARMState *env, uint32_t val);
> > diff --git a/target-arm/helper.c b/target-arm/helper.c
> > index b04fb5d..6bacc24 100644
> > --- a/target-arm/helper.c
> > +++ b/target-arm/helper.c
> > @@ -793,7 +793,7 @@ static const ARMCPRegInfo v7_cp_reginfo[] = {
> >        .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[1]),
> >        .resetvalue = 0 },
> >      { .name = "SCR", .cp = 15, .crn = 1, .crm = 1, .opc1 = 0, .opc2 = 0,
> > -      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.c1_scr),
> > +      .access = PL1_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
> >        .resetvalue = 0, },
> 
> It's awkward that this is now separate from the AArch64 reginfo
> below, because it makes it non-obvious that they're both the
> same underlying state. In particular that probably means this
> one now needs a NO_MIGRATE marker?

Yes, I've moved this into the el3 structure and added NO_MIGRATE.

Thanks,
Edgar


> 
> >      { .name = "CCSIDR", .state = ARM_CP_STATE_BOTH,
> >        .opc0 = 3, .crn = 0, .crm = 0, .opc1 = 1, .opc2 = 0,
> > @@ -2161,6 +2161,31 @@ static const ARMCPRegInfo v8_el2_cp_reginfo[] = {
> >      REGINFO_SENTINEL
> >  };
> >
> > +static void scr_write(CPUARMState *env, const ARMCPRegInfo *ri, uint64_t 
> > value)
> > +{
> > +    uint32_t valid_mask = SCR_MASK;
> > +
> > +    if (!arm_feature(env, ARM_FEATURE_EL2)) {
> > +        valid_mask &= ~SCR_HCE;
> > +
> > +        /* On ARMv7, SMD (or SCD as it is called in v7) is only
> > +         * supported if EL2 exists. The bit is UNK/SBZP when
> > +         * EL2 is unavailable. In QEMU ARMv7, we force it to always zero
> > +         * when EL2 is unavailable.
> > +         */
> > +        if (arm_feature(env, ARM_FEATURE_V7)) {
> > +            valid_mask &= ~SCR_SMD;
> > +        }
> > +    }
> > +
> > +    /* Set RES1 bits.  */
> > +    value |= SCR_RES1_MASK;
> > +
> > +    /* Clear RES0 bits.  */
> > +    value &= valid_mask;
> > +    raw_write(env, ri, value);
> > +}
> > +
> >  static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
> >      { .name = "ELR_EL3", .state = ARM_CP_STATE_AA64,
> >        .type = ARM_CP_NO_MIGRATE,
> > @@ -2183,6 +2208,10 @@ static const ARMCPRegInfo v8_el3_cp_reginfo[] = {
> >        .access = PL3_RW, .writefn = vbar_write,
> >        .fieldoffset = offsetof(CPUARMState, cp15.vbar_el[3]),
> >        .resetvalue = 0 },
> > +    { .name = "SCR_EL3", .state = ARM_CP_STATE_AA64,
> > +      .opc0 = 3, .opc1 = 6, .crn = 1, .crm = 1, .opc2 = 0,
> > +      .access = PL3_RW, .fieldoffset = offsetof(CPUARMState, cp15.scr_el3),
> > +      .writefn = scr_write },
> >      REGINFO_SENTINEL
> >  };
> 
> thanks
> -- PMM