Re: [Qemu-devel] [RFC v2 2/7] hw/arm/dyn_sysbus_devtree: helpers for sysbus device dynamic dt node generation

[Eric Auger]

On 08/11/2014 03:16 PM, Alexander Graf wrote:
> 
> On 08.08.14 17:03, Eric Auger wrote:
>> This module will be used by ARM machine files to generate
>> device tree nodes of dynamically instantiated sysbus devices (ie.
>> those instantiated with -device option).
>>
>> Signed-off-by: Alexander Graf <address@hidden>
>> Signed-off-by: Eric Auger <address@hidden>
>>
>> ---
>>
>> v2:
>> - Code moved in an arch specific file to accomodate architecture
>>    dependent specificities.
>> - remove platform_bus_base from PlatformDevtreeData
>>
>> v1: code originally written by Alex Graf in e500.c and reused for ARM
>>      [Eric Auger]
>>      code originally moved in hw/misc/platform_devices and device itself
>> ---
>>   hw/arm/Makefile.objs                |  1 +
>>   hw/arm/dyn_sysbus_devtree.c         | 66
>> +++++++++++++++++++++++++++++++++++++
>>   include/hw/arm/dyn_sysbus_devtree.h | 18 ++++++++++
>>   3 files changed, 85 insertions(+)
>>   create mode 100644 hw/arm/dyn_sysbus_devtree.c
>>   create mode 100644 include/hw/arm/dyn_sysbus_devtree.h
>>
>> diff --git a/hw/arm/Makefile.objs b/hw/arm/Makefile.objs
>> index 6088e53..bc5e014 100644
>> --- a/hw/arm/Makefile.objs
>> +++ b/hw/arm/Makefile.objs
>> @@ -3,6 +3,7 @@ obj-$(CONFIG_DIGIC) += digic_boards.o
>>   obj-y += integratorcp.o kzm.o mainstone.o musicpal.o nseries.o
>>   obj-y += omap_sx1.o palm.o realview.o spitz.o stellaris.o
>>   obj-y += tosa.o versatilepb.o vexpress.o virt.o xilinx_zynq.o z2.o
>> +obj-y += dyn_sysbus_devtree.o
>>     obj-y += armv7m.o exynos4210.o pxa2xx.o pxa2xx_gpio.o pxa2xx_pic.o
>>   obj-$(CONFIG_DIGIC) += digic.o
>> diff --git a/hw/arm/dyn_sysbus_devtree.c b/hw/arm/dyn_sysbus_devtree.c
>> new file mode 100644
>> index 0000000..56af62f
>> --- /dev/null
>> +++ b/hw/arm/dyn_sysbus_devtree.c
>> @@ -0,0 +1,66 @@
>> +#include "hw/arm/dyn_sysbus_devtree.h"
>> +#include "qemu/error-report.h"
>> +#include "sysemu/device_tree.h"
>> +
>> +int sysbus_device_create_devtree(Object *obj, void *opaque)
>> +{
>> +    PlatformDevtreeData *data = opaque;
>> +    Object *dev;
>> +    SysBusDevice *sbdev;
>> +    bool matched = false;
>> +
>> +    dev = object_dynamic_cast(obj, TYPE_SYS_BUS_DEVICE);
>> +    sbdev = (SysBusDevice *)dev;
>> +
>> +    if (!sbdev) {
>> +        /* Container, traverse it for children */
>> +        return object_child_foreach(obj,
>> sysbus_device_create_devtree, data);
>> +    }
>> +
>> +    if (!matched) {
>> +        error_report("Device %s is not supported by this machine yet.",
>> +                     qdev_fw_name(DEVICE(dev)));
>> +        exit(1);
>> +    }
>> +
>> +    return 0;
>> +}
>> +
>> +void platform_bus_create_devtree(DynSysbusParams *params,
>> +                                 void *fdt, const char *mpic)
>> +{
>> +    gchar *node = g_strdup_printf("/address@hidden"PRIx64,
>> +                                  params->platform_bus_base);
>> +    const char platcomp[] = "qemu,platform\0simple-bus";
>> +    PlatformDevtreeData data;
>> +    Object *container;
>> +    uint64_t addr = params->platform_bus_base;
>> +    uint64_t size = params->platform_bus_size;
>> +    int irq_start = params->platform_bus_first_irq;
>> +
>> +    /* Create a /platform node that we can put all devices into */
>> +
>> +    qemu_fdt_add_subnode(fdt, node);
>> +    qemu_fdt_setprop(fdt, node, "compatible", platcomp,
>> sizeof(platcomp));
>> +
>> +    /* Our platform bus region is less than 32bit big, so 1 cell is
>> enough for
>> +       address and size */
>> +    qemu_fdt_setprop_cells(fdt, node, "#size-cells", 1);
>> +    qemu_fdt_setprop_cells(fdt, node, "#address-cells", 1);
>> +    qemu_fdt_setprop_cells(fdt, node, "ranges", 0, addr >> 32, addr,
>> size);
>> +
>> +    qemu_fdt_setprop_phandle(fdt, node, "interrupt-parent", mpic);
>> +
>> +    /* Loop through all devices and create nodes for known ones */
>> +    data.fdt = fdt;
>> +    data.mpic = mpic;
>> +    data.irq_start = irq_start;
>> +    data.node = node;
>> +
>> +    container = container_get(qdev_get_machine(), "/peripheral");
>> +    sysbus_device_create_devtree(container, &data);
>> +    container = container_get(qdev_get_machine(), "/peripheral-anon");
>> +    sysbus_device_create_devtree(container, &data);
>> +
>> +    g_free(node);
>> +}
>> diff --git a/include/hw/arm/dyn_sysbus_devtree.h
>> b/include/hw/arm/dyn_sysbus_devtree.h
>> new file mode 100644
>> index 0000000..808d522
>> --- /dev/null
>> +++ b/include/hw/arm/dyn_sysbus_devtree.h
>> @@ -0,0 +1,18 @@
>> +#ifndef HW_ARM_DYN_SYSBUS_DEVTREE_H
>> +#define HW_ARM_DYN_SYSBUS_DEVTREE_H
>> +
>> +#include "hw/misc/dyn_sysbus_binding.h"
>> +
>> +typedef struct PlatformDevtreeData {
>> +    void *fdt;
>> +    const char *mpic;
>> +    int irq_start;
>> +    const char *node;
>> +} PlatformDevtreeData;
>> +
>> +int sysbus_device_create_devtree(Object *obj, void *opaque);
>> +
>> +void platform_bus_create_devtree(DynSysbusParams *params,
>> +                                 void *fdt, const char *mpic);
> 
> These functions live in hw/arm and thus should have names that indicate
> they are arm specific.
OK thanks

Eric
> 
> 
> Alex
>