[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v4 2/8] ahci: MSI capability should be at 0x80,
From: |
Michael S. Tsirkin |
Subject: |
Re: [Qemu-devel] [PATCH v4 2/8] ahci: MSI capability should be at 0x80, not 0x50. |
Date: |
Wed, 17 Sep 2014 19:42:43 +0300 |
On Wed, Sep 17, 2014 at 05:54:28PM +0200, Jan Kiszka wrote:
> On 2014-08-21 19:44, John Snow wrote:
> > In the Intel ICH9 data sheet, the MSI capability offset
> > in the PCI configuration space for ICH9 AHCI devices is
> > specified to be 0x80.
> >
> > Further, the PCI capability pointer should always point
> > to 0x80 in ICH9 devices, despite the fact that AHCI 1.3
> > specifies that it should be pointing to PMCAP (Which in
> > this instance would be 0x70) to maintain adherence to
> > the Intel data sheet specifications and real observed behavior.
> >
> > Signed-off-by: John Snow <address@hidden>
> > ---
> > hw/ide/ich.c | 7 ++++++-
> > 1 file changed, 6 insertions(+), 1 deletion(-)
> >
> > diff --git a/hw/ide/ich.c b/hw/ide/ich.c
> > index a2f1639..8eb77a1 100644
> > --- a/hw/ide/ich.c
> > +++ b/hw/ide/ich.c
> > @@ -71,6 +71,7 @@
> > #include <hw/ide/pci.h>
> > #include <hw/ide/ahci.h>
> >
> > +#define ICH9_MSI_CAP_OFFSET 0x80
> > #define ICH9_SATA_CAP_OFFSET 0xA8
> >
> > #define ICH9_IDP_BAR 4
> > @@ -115,7 +116,6 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
> > /* XXX Software should program this register */
> > dev->config[0x90] = 1 << 6; /* Address Map Register - AHCI mode */
> >
> > - msi_init(dev, 0x50, 1, true, false);
> > d->ahci.irq = pci_allocate_irq(dev);
> >
> > pci_register_bar(dev, ICH9_IDP_BAR, PCI_BASE_ADDRESS_SPACE_IO,
> > @@ -135,6 +135,11 @@ static int pci_ich9_ahci_init(PCIDevice *dev)
> > (ICH9_IDP_BAR + 0x4) | (ICH9_IDP_INDEX_LOG2 << 4));
> > d->ahci.idp_offset = ICH9_IDP_INDEX;
> >
> > + /* Although the AHCI 1.3 specification states that the first capability
> > + * should be PMCAP, the Intel ICH9 data sheet specifies that the ICH9
> > + * AHCI device puts the MSI capability first, pointing to 0x80. */
> > + msi_init(dev, ICH9_MSI_CAP_OFFSET, 1, true, false);
> > +
> > return 0;
> > }
> >
> >
>
> I did this for HDA recently, and it became clear that this requires a
> compat switch to expose the old, broken layout to older guests.
> Otherwise you can't migrate from them.
>
> Jan
Absolutely but ahci still disables migration :)
> --
> Siemens AG, Corporate Technology, CT RTC ITP SES-DE
> Corporate Competence Center Embedded Linux