[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH RESEND v1 Part2 12/13] acpi: Add hardware implementa
From: |
Tang Chen |
Subject: |
[Qemu-devel] [PATCH RESEND v1 Part2 12/13] acpi: Add hardware implementation for memory hot unplug. |
Date: |
Thu, 11 Dec 2014 14:19:51 +0800 |
This patch adds a new bit to memory hotplug IO port indicating that
ej0 has been evaluated by guest OS. And call pc-dimm unplug cb to do
the real removal.
Signed-off-by: Hu Tao <address@hidden>
Signed-off-by: Tang Chen <address@hidden>
---
docs/specs/acpi_mem_hotplug.txt | 8 ++++++--
hw/acpi/memory_hotplug.c | 23 ++++++++++++++++++++---
hw/core/qdev.c | 2 +-
include/hw/qdev-core.h | 1 +
4 files changed, 28 insertions(+), 6 deletions(-)
diff --git a/docs/specs/acpi_mem_hotplug.txt b/docs/specs/acpi_mem_hotplug.txt
index 1290994..28a1ffa 100644
--- a/docs/specs/acpi_mem_hotplug.txt
+++ b/docs/specs/acpi_mem_hotplug.txt
@@ -19,7 +19,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
access):
1: Device insert event, used to distinguish device for which
no device check event to OSPM was issued.
It's valid only when bit 1 is set.
- 2-7: reserved and should be ignored by OSPM
+ 2: Device remove event, used to indicate that device is being
+ removed.
+ 3-7: reserved and should be ignored by OSPM
[0x15-0x17] reserved
write access:
@@ -35,7 +37,9 @@ Memory hot-plug interface (IO port 0xa00-0xa17, 1-4 byte
access):
1: if set to 1 clears device insert event, set by OSPM
after it has emitted device check event for the
selected memory device
- 2-7: reserved, OSPM must clear them before writing to register
+ 2: set by hardware after it has emitted device eject event for
+ selected memory device
+ 3-7: reserved, OSPM must clear them before writing to register
Selecting memory device slot beyond present range has no effect on platform:
- write accesses to memory hot-plug registers not documented above are
diff --git a/hw/acpi/memory_hotplug.c b/hw/acpi/memory_hotplug.c
index 2b0c8ca..b9e8752 100644
--- a/hw/acpi/memory_hotplug.c
+++ b/hw/acpi/memory_hotplug.c
@@ -2,6 +2,7 @@
#include "hw/acpi/pc-hotplug.h"
#include "hw/mem/pc-dimm.h"
#include "hw/boards.h"
+#include "hw/qdev-core.h"
#include "trace.h"
#include "qapi-event.h"
@@ -75,6 +76,7 @@ static uint64_t acpi_memory_hotplug_read(void *opaque, hwaddr
addr,
case 0x14: /* pack and return is_* fields */
val |= mdev->is_enabled ? 1 : 0;
val |= mdev->is_inserting ? 2 : 0;
+ val |= mdev->is_removing ? 4 : 0;
trace_mhp_acpi_read_flags(mem_st->selector, val);
break;
default:
@@ -90,6 +92,8 @@ static void acpi_memory_hotplug_write(void *opaque, hwaddr
addr, uint64_t data,
MemHotplugState *mem_st = opaque;
MemStatus *mdev;
ACPIOSTInfo *info;
+ DeviceState *dev = NULL;
+ HotplugHandler *hotplug_ctrl = NULL;
if (!mem_st->dev_count) {
return;
@@ -121,21 +125,34 @@ static void acpi_memory_hotplug_write(void *opaque,
hwaddr addr, uint64_t data,
mdev = &mem_st->devs[mem_st->selector];
mdev->ost_status = data;
trace_mhp_acpi_write_ost_status(mem_st->selector, mdev->ost_status);
- /* TODO: implement memory removal on guest signal */
info = acpi_memory_device_status(mem_st->selector, mdev);
qapi_event_send_acpi_device_ost(info, &error_abort);
qapi_free_ACPIOSTInfo(info);
break;
- case 0x14:
+ case 0x14: /* set is_* fields */
mdev = &mem_st->devs[mem_st->selector];
+
if (data & 2) { /* clear insert event */
mdev->is_inserting = false;
trace_mhp_acpi_clear_insert_evt(mem_st->selector);
+ } else if (data & 4) { /* request removal of device */
+ /*
+ * QEmu memory hot unplug is an asynchronized procedure. QEmu first
+ * calls pc-dimm unplug request cb to send a SCI to guest. When the
+ * Guest OS finished handling the SCI, it evaluates ACPI ej0, and
+ * QEmu calls pc-dimm unplug cb to remove memory device.
+ */
+ dev = DEVICE(mdev->dimm);
+ hotplug_ctrl = qdev_get_hotplug_handler(dev);
+ /* Call pc-dimm unplug cb. */
+ hotplug_handler_unplug(hotplug_ctrl, dev, NULL);
}
+
+ break;
+ default:
break;
}
-
}
static const MemoryRegionOps acpi_memory_hotplug_ops = {
.read = acpi_memory_hotplug_read,
diff --git a/hw/core/qdev.c b/hw/core/qdev.c
index 35fd00d..ab45b77 100644
--- a/hw/core/qdev.c
+++ b/hw/core/qdev.c
@@ -223,7 +223,7 @@ void qdev_set_legacy_instance_id(DeviceState *dev, int
alias_id,
dev->alias_required_for_version = required_for_version;
}
-static HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev)
{
HotplugHandler *hotplug_ctrl = NULL;
diff --git a/include/hw/qdev-core.h b/include/hw/qdev-core.h
index 589bbe7..60f549e 100644
--- a/include/hw/qdev-core.h
+++ b/include/hw/qdev-core.h
@@ -261,6 +261,7 @@ void qdev_init_nofail(DeviceState *dev);
void qdev_set_legacy_instance_id(DeviceState *dev, int alias_id,
int required_for_version);
void qdev_unplug(DeviceState *dev, Error **errp);
+HotplugHandler *qdev_get_hotplug_handler(DeviceState *dev);
void qdev_simple_device_unplug_cb(HotplugHandler *hotplug_dev,
DeviceState *dev, Error **errp);
void qdev_machine_creation_done(void);
--
1.8.4.2
- [Qemu-devel] [PATCH RESEND v1 Part2 02/13] acpi, mem-hotplug: Add acpi_memory_get_slot_status_descriptor() to get MemStatus., (continued)
- [Qemu-devel] [PATCH RESEND v1 Part2 02/13] acpi, mem-hotplug: Add acpi_memory_get_slot_status_descriptor() to get MemStatus., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 03/13] acpi, mem-hotplug: Add acpi_memory_hotplug_sci() to rise sci for memory hotplug., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 04/13] acpi, mem-hotplug: Add unplug request cb for memory device., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 05/13] acpi, piix4: Add memory hot unplug request support for piix4., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 06/13] acpi, ich9: Add memory hot unplug request support for ich9., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 07/13] pc-dimm: Add memory hot unplug request support for pc-dimm., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 08/13] acpi, mem-hotplug: Add unplug cb for memory device., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 09/13] acpi, piix4: Add memory hot unplug support for piix4., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 10/13] acpi, ich9: Add memory hot unplug support for ich9., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 11/13] pc-dimm: Add memory hot unplug support for pc-dimm., Tang Chen, 2014/12/11
- [Qemu-devel] [PATCH RESEND v1 Part2 12/13] acpi: Add hardware implementation for memory hot unplug.,
Tang Chen <=
- [Qemu-devel] [PATCH RESEND v1 Part2 13/13] pc, acpi bios: Add memory hot unplug interface., Tang Chen, 2014/12/11