[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v10 4/7] hw/vfio/platform: add capability to start I
From: |
Eric Auger |
Subject: |
[Qemu-devel] [PATCH v10 4/7] hw/vfio/platform: add capability to start IRQ propagation |
Date: |
Fri, 13 Feb 2015 03:47:09 +0000 |
Add a reset notify function that enables to start the propagation of
interrupts to the guest.
Signed-off-by: Eric Auger <address@hidden>
---
v8 -> v9:
- handle failure in vfio_irq_starter
---
hw/vfio/platform.c | 52 +++++++++++++++++++++++++++++++++++++++++
include/hw/vfio/vfio-platform.h | 8 +++++++
2 files changed, 60 insertions(+)
diff --git a/hw/vfio/platform.c b/hw/vfio/platform.c
index b85ad6c..30798d8 100644
--- a/hw/vfio/platform.c
+++ b/hw/vfio/platform.c
@@ -553,6 +553,58 @@ static void vfio_platform_realize(DeviceState *dev, Error
**errp)
}
}
+/*
+ * Binding to the platform bus IRQ happens on a machine init done
+ * notifier registered by the platform bus. Only at that time the
+ * absolute virtual IRQ = GSI is known and allows to setup IRQFD.
+ * vfio_kick_irqs can typically be used as a reset notifier function.
+ */
+
+/* Start injection of IRQ for a specific VFIO device */
+static int vfio_irq_starter(SysBusDevice *sbdev, void *opaque)
+{
+ DeviceState *intc = (DeviceState *)opaque;
+ VFIOPlatformDevice *vdev;
+ VFIOINTp *intp;
+ qemu_irq irq;
+ int gsi, ret;
+
+ if (object_dynamic_cast(OBJECT(sbdev), TYPE_VFIO_PLATFORM)) {
+ vdev = VFIO_PLATFORM_DEVICE(sbdev);
+
+ QLIST_FOREACH(intp, &vdev->intp_list, next) {
+ gsi = 0;
+ while (1) {
+ irq = qdev_get_gpio_in(intc, gsi);
+ if (irq == intp->qemuirq) {
+ break;
+ }
+ gsi++;
+ }
+ intp->virtualID = gsi;
+ ret = vdev->start_irq_fn(intp);
+ if (ret) {
+ error_report("%s unable to start propagation of IRQ index %d",
+ vdev->vbasedev.name, intp->pin);
+ exit(1);
+ }
+ }
+ }
+ return 0;
+}
+
+/* loop on all VFIO platform devices and start their IRQ injection */
+void vfio_kick_irqs(void *data)
+{
+ DeviceState *intc = (DeviceState *)data;
+ DeviceState *dev =
+ qdev_find_recursive(sysbus_get_default(), TYPE_PLATFORM_BUS_DEVICE);
+ PlatformBusDevice *pbus = PLATFORM_BUS_DEVICE(dev);
+
+ assert(pbus->done_gathering);
+ foreach_dynamic_sysbus_device(vfio_irq_starter, intc);
+}
+
static const VMStateDescription vfio_platform_vmstate = {
.name = TYPE_VFIO_PLATFORM,
.unmigratable = 1,
diff --git a/include/hw/vfio/vfio-platform.h b/include/hw/vfio/vfio-platform.h
index e55b711..bd1206e 100644
--- a/include/hw/vfio/vfio-platform.h
+++ b/include/hw/vfio/vfio-platform.h
@@ -74,4 +74,12 @@ typedef struct VFIOPlatformDeviceClass {
#define VFIO_PLATFORM_DEVICE_GET_CLASS(obj) \
OBJECT_GET_CLASS(VFIOPlatformDeviceClass, (obj), TYPE_VFIO_PLATFORM)
+/**
+ * vfio_kick_irqs - reset notifier that starts IRQ injection
+ * for all VFIO dynamic sysbus devices attached to the platform bus.
+ *
+ * @opaque: handle to the interrupt controller DeviceState*
+ */
+void vfio_kick_irqs(void *opaque);
+
#endif /*HW_VFIO_VFIO_PLATFORM_H*/
--
1.8.3.2
- [Qemu-devel] [PATCH v10 0/7] KVM platform device passthrough, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 1/7] linux-headers: update VFIO header for VFIO platform drivers, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 2/7] hw/vfio/platform: vfio-platform skeleton, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 3/7] hw/vfio/platform: add irq assignment, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 5/7] hw/vfio: calxeda xgmac device, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 4/7] hw/vfio/platform: add capability to start IRQ propagation,
Eric Auger <=
- [Qemu-devel] [PATCH v10 7/7] hw/vfio/platform: add irqfd support, Eric Auger, 2015/02/12
- [Qemu-devel] [PATCH v10 6/7] hw/arm/sysbus-fdt: enable vfio-calxeda-xgmac dynamic instantiation, Eric Auger, 2015/02/12