[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Qemu-devel] [PATCH v6 12/15] spapr_pci: create DRConnectors for each PC
From: |
Michael Roth |
Subject: |
[Qemu-devel] [PATCH v6 12/15] spapr_pci: create DRConnectors for each PCI slot during PHB realize |
Date: |
Thu, 26 Feb 2015 21:11:12 -0600 |
These will be used to support hotplug/unplug of PCI devices to the PCI
bus associated with a particular PHB.
We also set up device-tree properties in each PHBs initial FDT to
describe the DRCs associated with them. This advertises to guests that
each PHB is DR-capable device with physical hotpluggable slots, each
managed by the corresponding DRC. This is necessary for allowing
hotplugging of devices to it later via bus rescan or guest rpaphp
hotplug module.
Signed-off-by: Michael Roth <address@hidden>
Reviewed-by: David Gibson <address@hidden>
---
hw/ppc/spapr_pci.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
index e6e2f7b..333a940 100644
--- a/hw/ppc/spapr_pci.c
+++ b/hw/ppc/spapr_pci.c
@@ -47,6 +47,8 @@
#define RTAS_TYPE_MSI 1
#define RTAS_TYPE_MSIX 2
+#include "hw/ppc/spapr_drc.h"
+
static sPAPRPHBState *find_phb(sPAPREnvironment *spapr, uint64_t buid)
{
sPAPRPHBState *sphb;
@@ -628,6 +630,15 @@ static void spapr_phb_realize(DeviceState *dev, Error
**errp)
sphb->lsi_table[i].irq = irq;
}
+ /* allocate connectors for child PCI devices */
+ if (sphb->dr_enabled) {
+ for (i = 0; i < PCI_SLOT_MAX; i++) {
+ spapr_dr_connector_new(OBJECT(phb),
+ SPAPR_DR_CONNECTOR_TYPE_PCI,
+ (sphb->index << 16) | (i << 3));
+ }
+ }
+
if (!info->finish_realize) {
error_setg(errp, "finish_realize not defined");
return;
@@ -867,7 +878,7 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
uint32_t xics_phandle,
void *fdt)
{
- int bus_off, i, j;
+ int bus_off, i, j, ret;
char nodename[256];
uint32_t bus_range[] = { cpu_to_be32(0), cpu_to_be32(0xff) };
const uint64_t mmiosize = memory_region_size(&phb->memwindow);
@@ -956,6 +967,12 @@ int spapr_populate_pci_dt(sPAPRPHBState *phb,
object_child_foreach(OBJECT(phb), spapr_phb_children_dt,
&((sPAPRTCEDT){ .fdt = fdt, .node_off = bus_off }));
+ ret = spapr_drc_populate_dt(fdt, bus_off, OBJECT(phb),
+ SPAPR_DR_CONNECTOR_TYPE_PCI);
+ if (ret) {
+ return ret;
+ }
+
return 0;
}
--
1.9.1
- [Qemu-devel] [PATCH v6 00/15] spapr: add support for pci hotplug, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 09/15] spapr_events: event-scan RTAS interface, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 10/15] spapr_drc: add spapr_drc_populate_dt(), Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 13/15] pci: make pci_bar useable outside pci.c, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 11/15] spapr_pci: add dynamic-reconfiguration option for spapr-pci-host-bridge, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 12/15] spapr_pci: create DRConnectors for each PCI slot during PHB realize,
Michael Roth <=
- [Qemu-devel] [PATCH v6 01/15] docs: add sPAPR hotplug/dynamic-reconfiguration documentation, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 02/15] spapr_drc: initial implementation of sPAPRDRConnector device, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 14/15] spapr_pci: enable basic hotplug operations, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 04/15] spapr_rtas: add set-indicator RTAS interface, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 15/15] spapr_pci: emit hotplug add/remove events during hotplug, Michael Roth, 2015/02/26
- [Qemu-devel] [PATCH v6 03/15] spapr_rtas: add get/set-power-level RTAS interfaces, Michael Roth, 2015/02/26