[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH
From: |
David Gibson |
Subject: |
Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset |
Date: |
Mon, 30 Mar 2015 13:39:16 +1100 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Thu, Mar 26, 2015 at 04:35:01PM +1100, Gavin Shan wrote:
> The PCI device MSIx table is cleaned out in hardware after EEH PE
> reset. However, we still hold the stale MSIx entries in QEMU, which
> should be cleared accordingly. Otherwise, we will run into another
> (recursive) EEH error and the PCI devices contained in the PE have
> to be offlined exceptionally.
>
> The patch introduces function vfio_eeh_pe_reset(), which is called
> by sPAPR when asserting hot or fundamental reset, to clear stale MSIx
> table before EEH PE reset so that MSIx table could be restored properly
> after EEH PE reset.
>
> Signed-off-by: Gavin Shan <address@hidden>
> ---
> hw/ppc/spapr_pci_vfio.c | 13 +++++++++----
> hw/vfio/Makefile.objs | 6 +++++-
> hw/vfio/pci-stub.c | 16 ++++++++++++++++
> hw/vfio/pci.c | 36 ++++++++++++++++++++++++++++++++++++
> include/hw/vfio/vfio.h | 2 ++
> 5 files changed, 68 insertions(+), 5 deletions(-)
> create mode 100644 hw/vfio/pci-stub.c
>
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> index 99a1be5..6fa3afe 100644
> --- a/hw/ppc/spapr_pci_vfio.c
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -151,19 +151,24 @@ static int spapr_phb_vfio_eeh_reset(sPAPRPHBState
> *sphb, int option)
> switch (option) {
> case RTAS_SLOT_RESET_DEACTIVATE:
> op.op = VFIO_EEH_PE_RESET_DEACTIVATE;
> + ret = vfio_container_ioctl(&svphb->phb.iommu_as,
> + svphb->iommugroupid,
> + VFIO_EEH_PE_OP, &op);
For consistency, I think all the reset operations should go through
vfio_eeh_pe_reset(), even though in this case it won't do more than
call vfio_container_ioctl().
> break;
> case RTAS_SLOT_RESET_HOT:
> - op.op = VFIO_EEH_PE_RESET_HOT;
> + ret = vfio_eeh_pe_reset(&svphb->phb.iommu_as,
> + svphb->iommugroupid,
> + VFIO_EEH_PE_RESET_HOT);
> break;
> case RTAS_SLOT_RESET_FUNDAMENTAL:
> - op.op = VFIO_EEH_PE_RESET_FUNDAMENTAL;
> + ret = vfio_eeh_pe_reset(&svphb->phb.iommu_as,
> + svphb->iommugroupid,
> + VFIO_EEH_PE_RESET_FUNDAMENTAL);
> break;
> default:
> return RTAS_OUT_PARAM_ERROR;
> }
>
> - ret = vfio_container_ioctl(&svphb->phb.iommu_as, svphb->iommugroupid,
> - VFIO_EEH_PE_OP, &op);
> if (ret < 0) {
> return RTAS_OUT_HW_ERROR;
> }
> diff --git a/hw/vfio/Makefile.objs b/hw/vfio/Makefile.objs
> index e31f30e..1b8a065 100644
> --- a/hw/vfio/Makefile.objs
> +++ b/hw/vfio/Makefile.objs
> @@ -1,4 +1,8 @@
> ifeq ($(CONFIG_LINUX), y)
> obj-$(CONFIG_SOFTMMU) += common.o
> -obj-$(CONFIG_PCI) += pci.o
> +ifeq ($(CONFIG_PCI), y)
> +obj-y += pci.o
> +else
> +obj-y += pci-stub.o
> +endif
> endif
> diff --git a/hw/vfio/pci-stub.c b/hw/vfio/pci-stub.c
> new file mode 100644
> index 0000000..f317c1e
> --- /dev/null
> +++ b/hw/vfio/pci-stub.c
> @@ -0,0 +1,16 @@
> +/*
> + * To include the file on !CONFIG_PCI
> + *
> + * This work is licensed under the terms of the GNU GPL, version 2. See
> + * the COPYING file in the top-level directory.
> + */
> +
> +#include <linux/vfio.h>
> +
> +#include "exec/memory.h"
> +#include "hw/vfio/vfio.h"
> +
> +int vfio_eeh_pe_reset(AddressSpace *as, int32_t groupid, uint32_t option)
> +{
> + return -1;
Probably should have assert(0) here - this should never be called if
!CONFIG_PCI.
> +}
> diff --git a/hw/vfio/pci.c b/hw/vfio/pci.c
> index 6b80539..d0fd4b4 100644
> --- a/hw/vfio/pci.c
> +++ b/hw/vfio/pci.c
> @@ -3319,6 +3319,42 @@ static void vfio_unregister_req_notifier(VFIOPCIDevice
> *vdev)
> vdev->req_enabled = false;
> }
>
> +int vfio_eeh_pe_reset(AddressSpace *as, int32_t groupid, uint32_t option)
> +{
> + VFIOGroup *group;
> + VFIODevice *vbasedev;
> + VFIOPCIDevice *vdev;
> + struct vfio_eeh_pe_op op = {
> + .argsz = sizeof(op),
> + .op = option
> + };
> +
> + group = vfio_get_group(groupid, as);
> + if (!group) {
> + error_report("vfio: group %d not found\n", groupid);
> + return -1;
> + }
> +
> + /*
> + * The MSIx table will be cleaned out by reset. We need
> + * disable it so that it can be reenabled properly. Also,
> + * the cached MSIx table should be cleared as it's not
> + * reflecting the contents in hardware.
> + */
> + QLIST_FOREACH(vbasedev, &group->device_list, next) {
> + vdev = container_of(vbasedev, VFIOPCIDevice, vbasedev);
> + if (msix_enabled(&vdev->pdev)) {
> + vfio_disable_msix(vdev);
> + }
> +
> + msix_reset(&vdev->pdev);
> + }
> +
> + vfio_put_group(group);
> +
> + return vfio_container_ioctl(as, groupid, VFIO_EEH_PE_OP, &op);
> +}
> +
> static int vfio_initfn(PCIDevice *pdev)
> {
> VFIOPCIDevice *vdev = DO_UPCAST(VFIOPCIDevice, pdev, pdev);
> diff --git a/include/hw/vfio/vfio.h b/include/hw/vfio/vfio.h
> index 0b26cd8..52de277 100644
> --- a/include/hw/vfio/vfio.h
> +++ b/include/hw/vfio/vfio.h
> @@ -5,5 +5,7 @@
>
> extern int vfio_container_ioctl(AddressSpace *as, int32_t groupid,
> int req, void *param);
> +extern int vfio_eeh_pe_reset(AddressSpace *as,
> + int32_t groupid, uint32_t option);
>
> #endif
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgpbvG30Ql62j.pgp
Description: PGP signature
- [Qemu-devel] [PATCH v3 0/2] Bug fixes for EEH on VFIO PCI devices, Gavin Shan, 2015/03/26
- [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/26
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, David Gibson, 2015/03/27
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset,
David Gibson <=
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/30
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Alex Williamson, 2015/03/31
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/31
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Alex Williamson, 2015/03/31
- Re: [Qemu-devel] [PATCH v3 1/2] VFIO: Clear stale MSIx table during EEH reset, Gavin Shan, 2015/03/31
[Qemu-devel] [PATCH 2/2] sPAPR: Reenable EEH functionality on reboot, Gavin Shan, 2015/03/26