[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH qemu v6 11/15] spapr_pci: Do complete reset of D
From: |
David Gibson |
Subject: |
Re: [Qemu-devel] [PATCH qemu v6 11/15] spapr_pci: Do complete reset of DMA config when resetting PHB |
Date: |
Wed, 22 Apr 2015 16:39:03 +1000 |
User-agent: |
Mutt/1.5.23 (2014-03-12) |
On Sat, Apr 11, 2015 at 01:24:40AM +1000, Alexey Kardashevskiy wrote:
> On a system reset, DMA configuration has to reset too. At the moment
> it clears the table content. This is enough for the single table case
> but with DDW, we will also have to disable all DMA windows except
> the default one. Furthermore according to sPAPR, if the guest removed
> the default window and created a huge one at the same zero offset on
> a PCI bus, the reset handler has to recreate the default window with
> the default properties (2GB big, 4K pages).
>
> This reworks SPAPR PHB code to disable the existing DMA window on reset
> and then configure and enable the default window.
> Without DDW that means that the same window will be disabled and then
> enabled with no other change in behaviour.
>
> This changes the table creation to do it in one place in PHB (VFIO PHB
> just inherits the behaviour from PHB). The actual table allocation is
> done from the reset handler and this is where finish_realize() is called.
Looks like your commit message needs an update - you already got rid
of finish_realize() at this point in the series.
> This disables all DMA windows on a PHB reset. It does not make any
> difference now as there is just one DMA window but it will later with DDW
> patches.
>
> spapr_phb_dma_reset() and spapr_phb_dma_remove_window() will be used
> in following patch so make it public.
>
> Signed-off-by: Alexey Kardashevskiy <address@hidden>
> ---
> hw/ppc/spapr_pci.c | 45
> ++++++++++++++++++++++++++++++++++++---------
> hw/ppc/spapr_pci_vfio.c | 6 ------
> include/hw/pci-host/spapr.h | 3 +++
> 3 files changed, 39 insertions(+), 15 deletions(-)
>
> diff --git a/hw/ppc/spapr_pci.c b/hw/ppc/spapr_pci.c
> index 664687c..3d40f5b 100644
> --- a/hw/ppc/spapr_pci.c
> +++ b/hw/ppc/spapr_pci.c
> @@ -736,7 +736,6 @@ static void spapr_phb_realize(DeviceState *dev, Error
> **errp)
> SysBusDevice *s = SYS_BUS_DEVICE(dev);
> sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(s);
> PCIHostState *phb = PCI_HOST_BRIDGE(s);
> - sPAPRPHBClass *info = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(s);
> char *namebuf;
> int i;
> PCIBus *bus;
> @@ -887,14 +886,6 @@ static void spapr_phb_realize(DeviceState *dev, Error
> **errp)
> return;
> }
>
> - info->dma_capabilities_update(sphb);
> - info->dma_init_window(sphb, sphb->dma_liobn, SPAPR_TCE_PAGE_SHIFT,
> - sphb->dma32_window_size);
> - tcet = spapr_tce_find_by_liobn(sphb->dma_liobn);
> - if (!tcet) {
> - error_setg(errp, "failed to create TCE table");
> - return;
> - }
> memory_region_add_subregion(&sphb->iommu_root, 0,
> spapr_tce_get_iommu(tcet));
>
> @@ -923,6 +914,40 @@ static int spapr_phb_dma_init_window(sPAPRPHBState *sphb,
> return 0;
> }
>
> +int spapr_phb_dma_remove_window(sPAPRPHBState *sphb,
> + sPAPRTCETable *tcet)
The only caller of this is just below, why is it not static?
> +{
> + spapr_tce_table_disable(tcet);
> +
> + return 0;
> +}
> +
> +static int spapr_phb_disable_dma_windows(Object *child, void *opaque)
> +{
> + sPAPRPHBState *sphb = SPAPR_PCI_HOST_BRIDGE(opaque);
> + sPAPRTCETable *tcet = (sPAPRTCETable *)
> + object_dynamic_cast(child, TYPE_SPAPR_TCE_TABLE);
> +
> + if (tcet) {
> + spapr_phb_dma_remove_window(sphb, tcet);
> + }
> +
> + return 0;
> +}
> +
> +int spapr_phb_dma_reset(sPAPRPHBState *sphb)
> +{
> + const uint32_t liobn = SPAPR_PCI_LIOBN(sphb->index, 0);
> + sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_GET_CLASS(sphb);
> +
> + spc->dma_capabilities_update(sphb); /* Refresh @has_vfio status */
> + object_child_foreach(OBJECT(sphb), spapr_phb_disable_dma_windows, sphb);
> + spc->dma_init_window(sphb, liobn, SPAPR_TCE_PAGE_SHIFT,
> + sphb->dma32_window_size);
> +
> + return 0;
> +}
> +
> static int spapr_phb_children_reset(Object *child, void *opaque)
> {
> DeviceState *dev = (DeviceState *) object_dynamic_cast(child,
> TYPE_DEVICE);
> @@ -936,6 +961,8 @@ static int spapr_phb_children_reset(Object *child, void
> *opaque)
>
> static void spapr_phb_reset(DeviceState *qdev)
> {
> + spapr_phb_dma_reset(SPAPR_PCI_HOST_BRIDGE(qdev));
> +
> /* Reset the IOMMU state */
> object_child_foreach(OBJECT(qdev), spapr_phb_children_reset, NULL);
> }
> diff --git a/hw/ppc/spapr_pci_vfio.c b/hw/ppc/spapr_pci_vfio.c
> index a5b97d0..f89e053 100644
> --- a/hw/ppc/spapr_pci_vfio.c
> +++ b/hw/ppc/spapr_pci_vfio.c
> @@ -58,11 +58,6 @@ static int spapr_phb_vfio_dma_init_window(sPAPRPHBState
> *sphb,
> return 0;
> }
>
> -static void spapr_phb_vfio_reset(DeviceState *qdev)
> -{
> - /* Do nothing */
> -}
> -
> static int spapr_phb_vfio_eeh_set_option(sPAPRPHBState *sphb,
> unsigned int addr, int option)
> {
> @@ -176,7 +171,6 @@ static void spapr_phb_vfio_class_init(ObjectClass *klass,
> void *data)
> sPAPRPHBClass *spc = SPAPR_PCI_HOST_BRIDGE_CLASS(klass);
>
> dc->props = spapr_phb_vfio_properties;
> - dc->reset = spapr_phb_vfio_reset;
> spc->dma_capabilities_update = spapr_phb_vfio_dma_capabilities_update;
> spc->dma_init_window = spapr_phb_vfio_dma_init_window;
> spc->eeh_set_option = spapr_phb_vfio_eeh_set_option;
> diff --git a/include/hw/pci-host/spapr.h b/include/hw/pci-host/spapr.h
> index 3074145..7fda78e 100644
> --- a/include/hw/pci-host/spapr.h
> +++ b/include/hw/pci-host/spapr.h
> @@ -140,5 +140,8 @@ void spapr_pci_rtas_init(void);
> sPAPRPHBState *spapr_pci_find_phb(sPAPREnvironment *spapr, uint64_t buid);
> PCIDevice *spapr_pci_find_dev(sPAPREnvironment *spapr, uint64_t buid,
> uint32_t config_addr);
> +int spapr_phb_dma_remove_window(sPAPRPHBState *sphb,
> + sPAPRTCETable *tcet);
> +int spapr_phb_dma_reset(sPAPRPHBState *sphb);
>
> #endif /* __HW_SPAPR_PCI_H__ */
--
David Gibson | I'll have my music baroque, and my code
david AT gibson.dropbear.id.au | minimalist, thank you. NOT _the_ _other_
| _way_ _around_!
http://www.ozlabs.org/~dgibson
pgpILrqtVPbfV.pgp
Description: PGP signature
- Re: [Qemu-devel] [PATCH qemu v6 02/15] vmstate: Define VARRAY with VMS_ALLOC, (continued)
- [Qemu-devel] [PATCH qemu v6 01/15] linux headers update for DDW on SPAPR, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 04/15] vfio: spapr: Move SPAPR-related code to a separate file, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 10/15] spapr_pci_vfio: Remove unnecessary cast to sPAPRPHBVFIOState, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 11/15] spapr_pci: Do complete reset of DMA config when resetting PHB, Alexey Kardashevskiy, 2015/04/10
- Re: [Qemu-devel] [PATCH qemu v6 11/15] spapr_pci: Do complete reset of DMA config when resetting PHB,
David Gibson <=
- [Qemu-devel] [PATCH qemu v6 06/15] spapr_pci: Convert finish_realize() to dma_capabilities_update()+dma_init_window(), Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 05/15] spapr_pci_vfio: Enable multiple groups per container, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 09/15] spapr_iommu: Add root memory region, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 15/15] vfio: Enable DDW ioctls to VFIO IOMMU driver, Alexey Kardashevskiy, 2015/04/10
- [Qemu-devel] [PATCH qemu v6 08/15] spapr_iommu: Introduce "enabled" state for TCE table, Alexey Kardashevskiy, 2015/04/10