[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt()
From: |
Igor Mammedov |
Subject: |
Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term |
Date: |
Tue, 19 May 2015 14:09:13 +0200 |
On Mon, 18 May 2015 12:34:04 +0200
"Michael S. Tsirkin" <address@hidden> wrote:
> On Mon, May 18, 2015 at 12:00:09PM +0800, Shannon Zhao wrote:
> > On 2015/5/15 20:45, Igor Mammedov wrote:
> > > On Thu, 7 May 2015 17:29:07 +0800
> > > Shannon Zhao <address@hidden> wrote:
> > >
> > >> From: Shannon Zhao <address@hidden>
> > >>
> > >> Add aml_interrupt() for describing device interrupt in resource template.
> > >> These can be used to generating DSDT table for ACPI on ARM.
> > >>
> > >> Signed-off-by: Shannon Zhao <address@hidden>
> > >> Signed-off-by: Shannon Zhao <address@hidden>
> > >> ---
> > >> hw/acpi/aml-build.c | 28 +++++++++++++++++++++++++
> > >> include/hw/acpi/aml-build.h | 50
> > >> +++++++++++++++++++++++++++++++++++++++++++++
> > >> 2 files changed, 78 insertions(+)
> > >>
> > >> diff --git a/hw/acpi/aml-build.c b/hw/acpi/aml-build.c
> > >> index 61407b7..babe4d6 100644
> > >> --- a/hw/acpi/aml-build.c
> > >> +++ b/hw/acpi/aml-build.c
> > >> @@ -532,6 +532,34 @@ Aml *aml_memory32_fixed(uint32_t addr, uint32_t
> > >> size,
> > >> return var;
> > >> }
> > >>
> > >> +/*
> > >> + * ACPI 1.0: 6.4.3.6 Interrupt (Interrupt Resource Descriptor Macro)
> > >> + */
> > > I'm looking at 1.0b spec, respective chapter named as
> > > "Extended Interrupt Descriptor (Type 1, Large Item Name 0x9)"
> > >
> > >> +Aml *aml_interrupt(AmlConsumerAndProducer con_and_pro,
> > >> + AmlLevelAndEdge level_and_edge,
> > >> + AmlActiveHighAndLow high_and_low,
> > >> + AmlExclusiveAndShared exclusive_and_shared,
> > >> + AmlWakeCap wake_capable, uint32_t irq)
> > > there isn't wake_capable flag in 1.0b spec,
> > > either fix above to spec where it was introduced or drop this flag
> > > if it won't be not used and stay with 1.0 spec.
> > >
> > > if you choose a newer spec route than
> > >
> > > s/AmlExclusiveAndShared exclusive_and_shared/AmlShared shared/
> > >
> > > and
> > >
> > > typedef enum {
> > > aml_exclusive = 0,
> > > aml_shared = 1,
> > > aml_exclusive_and_wake = 2,
> > > aml_shared_and_wake = 3
> > > } AmlShared;
> > >
> > > to be closer to the spec
> > >
> >
> > Ok, thanks, I would choose a ACPI 5.0 spec for this as the wake firstly
> > appears in this version.
> >
> > >> +{
> > >> + Aml *var = aml_alloc();
> > >> + uint8_t irq_flags = con_and_pro | (level_and_edge << 1)
> > >> + | (high_and_low << 2) | (exclusive_and_shared
> > >> << 3)
> > >> + | (wake_capable << 4);
> > >> +
> > >> + build_append_byte(var->buf, 0x89); /* Extended irq descriptor */
> > >> + build_append_byte(var->buf, 6); /* Length, bits[7:0] minimum value
> > >> = 6 */
> > >> + build_append_byte(var->buf, 0); /* Length, bits[15:8] minimum value
> > >> = 0 */
> > >> + build_append_byte(var->buf, irq_flags); /* Interrupt Vector
> > >> Information. */
> > >> + build_append_byte(var->buf, 0x01); /* Interrupt table length = 1 */
> > >> +
> > >> + /* Interrupt Number */
> > >> + build_append_byte(var->buf, extract32(irq, 0, 8)); /* bits[7:0] */
> > >> + build_append_byte(var->buf, extract32(irq, 8, 8)); /* bits[15:8] */
> > >> + build_append_byte(var->buf, extract32(irq, 16, 8)); /* bits[23:16]
> > >> */
> > >> + build_append_byte(var->buf, extract32(irq, 24, 8)); /* bits[31:24]
> > >> */
> > >> + return var;
> > >> +}
> > >> +
> > >> /* ACPI 1.0b: 6.4.2.5 I/O Port Descriptor */
> > >> Aml *aml_io(AmlIODecode dec, uint16_t min_base, uint16_t max_base,
> > >> uint8_t aln, uint8_t len)
> > >> diff --git a/include/hw/acpi/aml-build.h b/include/hw/acpi/aml-build.h
> > >> index 154823b..5b60744 100644
> > >> --- a/include/hw/acpi/aml-build.h
> > >> +++ b/include/hw/acpi/aml-build.h
> > >> @@ -105,6 +105,51 @@ typedef enum {
> > >> aml_ReadWrite = 1,
> > >> } AmlReadAndWrite;
> > >>
> > >> +/*
> > >> + * ACPI 1.0b: Table 6-28 Extended Interrupt Descriptor Definition
> > >> + * Interrupt Vector Flags Bits[0] Consumer/Producer
> > >> + */
> > >> +typedef enum {
> > >> + aml_consumer_producer = 0,
> > >> + aml_consumer = 1,
> > >> +} AmlConsumerAndProducer;
> > >> +
> > >> +/*
> > >> + * ACPI 1.0b: Table 6-28 Extended Interrupt Descriptor Definition
> > >> + * _HE field definition
> > >> + */
> > >> +typedef enum {
> > >> + aml_level = 0,
> > >> + aml_edge = 1,
> > >> +} AmlLevelAndEdge;
> > >> +
> > >> +/*
> > >> + * ACPI 1.0b: Table 6-28 Extended Interrupt Descriptor Definition
> > >> + * _LL field definition
> > >> + */
> > >> +typedef enum {
> > >> + aml_active_high = 0,
> > >> + aml_active_low = 1,
> > >> +} AmlActiveHighAndLow;
> > >> +
> > >> +/*
> > >> + * ACPI 1.0b: Table 6-28 Extended Interrupt Descriptor Definition
> > >> + * _SHR field definition
> > >> + */
> > >> +typedef enum {
> > >> + aml_exclusive = 0,
> > >> + aml_shared = 1,
> > >> +} AmlExclusiveAndShared;
> > >> +
> > >> +/*
> > >> + * ACPI 5.1: Table 6-203 Extended Interrupt Descriptor Definition
> > >> + * _WKC field definition
> > >> + */
> > >> +typedef enum {
> > >> + aml_not_wake_capable = 0,
> > >> + aml_wake_capable = 1,
> > >> +} AmlWakeCap;
> > >> +
> > >> typedef
> > >> struct AcpiBuildTables {
> > >> GArray *table_data;
> > >> @@ -164,6 +209,11 @@ Aml *aml_call3(const char *method, Aml *arg1, Aml
> > >> *arg2, Aml *arg3);
> > >> Aml *aml_call4(const char *method, Aml *arg1, Aml *arg2, Aml *arg3, Aml
> > >> *arg4);
> > >> Aml *aml_memory32_fixed(uint32_t addr, uint32_t size,
> > >> AmlReadAndWrite read_and_write);
> > >> +Aml *aml_interrupt(AmlConsumerAndProducer con_and_pro,
> > >> + AmlLevelAndEdge level_and_edge,
> > >> + AmlActiveHighAndLow high_and_low,
> > >> + AmlExclusiveAndShared exclusive_and_shared,
> > >> + AmlWakeCap wake_capable, uint32_t irq);
> > >> Aml *aml_io(AmlIODecode dec, uint16_t min_base, uint16_t max_base,
> > >> uint8_t aln, uint8_t len);
> > >> Aml *aml_operation_region(const char *name, AmlRegionSpace rs,
> > >
> > >
> > > .
> > >
>
>
> Also, enum values must all be formatted like this:
> UPPER_CASE
may be better not, for consistency with the rest of enums in this header.
>
> > --
> > Shannon
- [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, (continued)
- [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Shannon Zhao, 2015/05/07
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Peter Maydell, 2015/05/07
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Shannon Zhao, 2015/05/07
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Igor Mammedov, 2015/05/15
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Shannon Zhao, 2015/05/18
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Michael S. Tsirkin, 2015/05/18
- Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Igor Mammedov, 2015/05/19
Re: [Qemu-devel] [PATCH v6 05/22] hw/acpi/aml-build: Add aml_interrupt() term, Igor Mammedov, 2015/05/15
[Qemu-devel] [PATCH v6 03/22] hw/arm/virt-acpi-build: Basic framework for building ACPI tables on ARM, Shannon Zhao, 2015/05/07
[Qemu-devel] [PATCH v6 01/22] hw/i386: Move ACPI header definitions in an arch-independent location, Shannon Zhao, 2015/05/07
[Qemu-devel] [PATCH v6 16/22] hw/acpi/aml-build: Add aml_lnot() term, Shannon Zhao, 2015/05/07
[Qemu-devel] [PATCH v6 12/22] hw/arm/virt-acpi-build: Add PCIe info and generate MCFG table, Shannon Zhao, 2015/05/07